Speculation about the mysterious origin of the aurora has been around for a long time. But until now, unsubstantiated inferences have been clearly proven. The mystery has been revealed According to a new study published in the journal Nature, a team of physicists from the University of Iowa has finally demonstrated that the aurora is “generated by strong electromagnetic waves during geomagnetic storms.” The Northern Lights appear over a waterfall in Iceland. Photo: Getty Images. Research shows that these phenomena are known as Alfven waves, which launch electrons to Earth, causing the particles to produce a stream of light that scientists call the aurora borealis. “The measurements reveal that the small number of electrons undergo ‘resonant acceleration’ by the electric field of the Alfven wave, similar to a surfer catching a wave and continuing to accelerate while surfing with the wave,” said Deputy Professor Greg Howes, of the Department of Physics and Astronomy at the University of Iowa, is also a co-author of the study, said. The idea that electrons “surf” on an electromagnetic field is a hypothesis first introduced in 1946 by Russian physicist Lev Landau. The theory is named after the physicist who called it Landau damping. After more than 70 years, the Landau damping theory has been proven. Aurora re-creation After decades of research, scientists have understood how the aurora is produced, but only now have they been able to simulate these colorful bands of light. For the first time, artificial auroras have been recreated in the lab using large plasma physics equipment (LPD) at UCLA’s Basic Plasma Science Facility (BaPSF). Auroras observed from the International Space Station. Photo: NASA. According to the CNN , the scientists used a 20-meter-long room to reconstruct the Earth’s magnetic field using powerful magnetic coils on UCLA’s LPD instrument. Inside the room, the scientists created a plasma environment similar to what exists in near-Earth space. “Using a specially designed antenna, we project Alfven waves down the machine, just like when you quickly shake a water hose up and down and watch the waves move along the hose,” Mr Howes said. When they began to experience electrons “surfing” along the wave, they used other specialized instruments to assess how the electrons received energy from the wave. “Although the experiment did not reproduce the range of multicolored light in the sky, our measurements in the laboratory matched predictions from computer simulations and mathematical calculations, demonstrating that the Electrons surfing on Alfven waves can accelerate up to 72 million km / h and create aurora,” Mr Howes said. Study co-author Craig Kletzing added that these experiments allow them to make key measurements to prove the spatial and hypothetical measurements that actually explain how the aurora is produced. The aurora was taken in Alaska. Photo: Getty Images. Many space scientists are also excited by this new news. “I feel so excited! There are very few laboratory experiments that can prove hypotheses and models related to the space environment. Because space is so vast that it can’t be simulated in a lab,” said Patrick Koehn, a scientist in NASA’s Helicopter Physics Division. According to Koehn, understanding the acceleration mechanism of the electrons that produce the aurora will be useful for many future studies. Long road ahead Currently, the theory of how the aurora is generated has been proven, but there is still a long way to go to predict the strength of each upcoming storm. “Predicting the strength of a particular geomagnetic storm, based on observations of the Sun and measurements from spacecraft between the Earth and the Sun, remains a difficult unsolved problem.” Mr Howes said. Howes said they have established the bond of electrons surfing on Alfven waves about more than 16,000 km above the Earth’s surface. And now, they must learn to predict the strength of those Alfven waves using spaceship observatories.

The sea boundary of Ha Long – Cam Pha has a length of 18.7km, started in September 2019 and passes through the wards of Hong Ha, Ha Tu, Ha Phong (Ha Long City) and Quang Hanh (Cam Pha City). The section through Cam Pha city with a length of nearly 10km has basically completed the construction of the foundation, asphalt carpeting, lighting, etc. The contractor is expanding the roadbed to adjust 6 lanes. The section through Ha Long City has been implemented since March 2020, but the road foundation has been basically completed. Bridge 2 over Lo Phong stream (Ha Phong ward, Ha Long city) with a length of 80m has completed the main items, the contractor is preparing to construct the bridge deck. In the mountain tunnel category, the contractor is conducting 4 consecutive excavations in both directions at the same time. Up to now, both tunnels have dug 135/470m, it is expected to open the tunnel until July 15. Tunnel door through the mountain side of Ha Long city. For 4km at sea, the contractor is actively constructing the roadbed, it is expected that in August 2021, the foundation will be completed to move to the finishing stage and asphalt pavement. Do Phuong

The Vietnamese team was led by the Dubai police force from the hotel to the Zabeel stadium to participate in the match against the UAE team. The Nissan GT-R is a used supercar model. The Nissan GT-R in the Dubai police payroll belongs to the R35 generation, the “heart” of the car is a 3.8L twin-turbo V6 engine. This engine block is capable of producing 565 horsepower, maximum torque of 632 Nm. Nissan GT-R is capable of accelerating from 0-100 km / h in just 2.9 seconds, the maximum speed that this supercar model can achieve is 305 km / h. Meanwhile, the UAE delegation to the stadium was led by a Mercedes-AMG GT 63 S. This is a sports car of the German brand that has been added to this city’s police staff since the end of 2019. Mercedes equips this high-performance model with a 4.0L V8 engine, producing 639 horsepower. Power is transmitted to 4 wheels through a 9-speed automatic transmission. Mercedes-AMG GT 63 S can accelerate from 0-100 km / h in 3.2 seconds before reaching a maximum speed of 315 km / h. The Mercedes-AMG GT 63 S is patrolled at tourist attractions in Dubai. The police of this country also intended to add to the collection a Tesla Cybertruck. Dubai police have a total of 15 supercar models from “grass cars” like the Nissan GT-R to hypercar models like the Bugatti Veyron, McLaren 650S…

An employee scans and checks products in a Tiki warehouse in Ho Chi Minh City. (Photo: Bloomberg) Crossing the crowded streets of Ho Chi Minh City in a Honda, Ho Duc Quang carries toys, books and other packages to deliver to Tiki.vn customers. Quang, 25, needs to be quick, as Tiki promises to deliver in 2 hours. He uses AirPods to notify customers of his arrival, but there is one thing that slows down this shipper: Quang has to wait for customers to open the package, confirm the correct goods before departing for the next trip. It is a mandatory operation for those who do not trust online sellers. Quang’s speedy deliveries between the city of 9 million people are just part of a campaign to win over customers, many of whom shop online for the first time due to the pandemic. Winning isn’t easy where only about a third of adults have a bank account and less than 5% have a credit card. Most shopping at convenience stores, traditional markets. Although Euromonitor International estimates that e-commerce will only account for 3% of Vietnam’s retail market in 2020, the lowest in Southeast Asia, the potential of the market is extremely attractive. According to a report by Google, Temasek, Bain & Co, Vietnam’s digital economy is predicted to reach US$52 billion by 2025, an increase of 29% compared to 2020. Competition for customers Startups backed by Warburg Pincus, Goldman Sachs, JD.com or Shopee, Amazon are all targeting the Vietnamese middle class. From 2016 to the first half of 2020, investors poured $1.9 billion into the domestic online sector. Mr. Ralf Matthaes, Managing Director of Infocus Mekong Research, assessed that Vietnam is in the early stages of becoming a digital society with a young and technology-loving population. Therefore, these companies have to compete with each other to provide services. The government has set a target of online shopping to account for 10% of Vietnam’s retail sales by 2025. The regulator wants to reduce cash payments to create a more transparent, modern economy through increased non-payment of transactions. cash for public services and improve the regulatory framework for electronic payments. The consortium led by Alibaba and Baring Private Equity Asia will invest $400 million in exchange for a 5.5% stake in CrownX of Masan retail group. Under the agreement, Masan will cooperate with Lazada – Alibaba’s e-commerce platform in Southeast Asia. Kenny Ho, Southeast Asia Investment Director of Alibaba, affirmed that the combination of Alibaba’s online retail expertise, Lazada’s Vietnam platform, and Masan’s offline network will be a powerful catalyst for the company’s success. modernization of Vietnam’s retail market. In January, M-Service, the startup behind the Momo e-wallet, raised more than $100 million from an investment group, including Warburg Pincus. For the first time in their shopping life, Vietnamese people are “encircled” by the form of customer-first retailing that is common in developed economies. Trust of customers Online retailers are trying to woo shoppers wary of scam stores that don’t offer return policies. According to economist Nguyen Tri Hieu, “Vietnamese people don’t trust what they can’t see. Usually, they need to know what they’re buying. They have to smell it and touch it.” So e-commerce sites raced to launch marketing campaigns, offering discounts on everything from AirPods to Samsung washing machines. E-wallet startup that offers coupons. Tiki applies a refund policy of up to 30 days. Nguyen Thi Kim Chi, 31, who works for an entertainment website, said that 70% off and customer-oriented items attract her. Buyers are empowered to evaluate products and services online. If normal, they often have to go to the store complaining about the low quality of the product and there may be quarrels but nothing is corrected. According to Mr. Matthase, the epidemic will boost digital retail as 30% more Vietnamese will shop for everything from food to electronics online in 2020. Retail shifting According to Jeffrey Perlman, managing director of Warburg Pincus in Singapore, Vietnam’s retail market changes faster than other markets. Tiki is currently the largest domestic e-commerce platform in the country. Software engineer Tran Ngoc Thai Son built Tiki in 2010 from $5,000. Mr. Son writes code, buys 100 English books from Amazon, and delivers it by himself by motorbike. Currently, Tiki has 3,100 employees and a state-of-the-art logistics operations system overseen by Henry Low, former head of Amazon and Coupang. Along with the company’s growth is the effort to attract customers. Mr. Son deployed a system to filter counterfeit goods and sided with customers. For example, if there is a defect in a newly purchased phone, the customer wants to return it, they will support 100%. If the seller is not okay with this decision, Tiki will shut down their account. From diapers to beer According to Crunchbase, investors like Sumitomo, JD.com have invested $192.5 million in Tiki. Mr. Son anticipates more rounds of funding and prepares for an IPO. According to Mr. Low, Tiki handles less than 2 million orders per month. Employees busy arranging everything from diapers and diapers to Corona beer in the 10,000-square-foot fulfillment center. Tiki applies artificial intelligence and robots capable of transporting 800kg products to speed things up. Thanks to the logistics system, Mr. Son aims to transport 500,000 products in 2 hours, up from 200,000 currently, helping Tiki achieve its profit target. Du Lam (According to Bloomberg)

Recently, Miss Do Thi Ha appeared with her senior Luong Thuy Linh in a new fashion photo series. The two queens showed off their seductive bodies in summer-breathing outfits. Miss Luong Thuy Linh has the advantage of owning 1m22 feet, while Miss Do Thi Ha also has extremely sexy straight legs, so it can be said that the two beautiful queens are ‘inconclusive’ in this time. this color. Miss Do Thi Ha competed with her senior Luong Thuy Linh. Appearing in the photo series, Miss Do Thi Ha attracted attention with her personality and modern bangs. Her fresh and sexy makeup this time also received many positive reviews from the audience. Owning a beautiful, sweet and natural beauty, Do Thi Ha easily creates sympathy with everyone. If at the time of the coronation, the original beauty of Thanh Hoa prioritized feminine and elegant designs, then at the present time, it can be seen that Do Ha has begun to work hard to F5 style, experimenting with many different styles. Do Thi Ha shows off her long and sexy legs in a white feather dress. Thanks to her beautiful figure and dignified spirit, Do Thi Ha conquered the one-piece dress with soft and fancy fringe lines from silk, feather organza, creating the unique features of modern women. Dai always wants to challenge herself with a luxurious style with a bit of a break. In addition to her unique outfit, Do Thi Ha also attracts attention with her makeup and hairstyle. Undeniably, this new hairstyle has helped Do Thi Ha makeover to bring a youthful, fresh and impressive beauty. This new and positive change of Do Thi Ha makes fans question whether the beauty is trying to experiment with many different styles to prepare for the “battle” at the Miss World contest next year. Last year? Recently, on the official YouYube channel of the Miss World contest, a clip introduced for Miss World 2021 with meaningful journeys of beauties around the world was suddenly released. With the remarkable success of Do My Linh, Tieu Vy and Luong Thuy Linh in the previous years, beauty fans expressed their expectation to Do Thi Ha who will wear Vietnamese sash to Puerto Rico to attend. Miss World 2021 next December. Do Thi Ha received many compliments with her new hairstyle and makeup. At the beginning of March this year, the beauty site Missosology posted the second prediction table for the Miss World 2021 contest. Accordingly, Do Thi Ha was in the Top 7 most outstanding candidates. This is considered a good sign and a source of motivation for the beauty born in 2001 to be more confident in the upcoming journey of “bringing the bell to fight the country”. Receiving much love from the public, Do Thi Ha is actively changing her style and cultivating skills. Surely she will be the next strong “warrior” of Vietnam to attend the international beauty arena Miss World 2021.

At the Hai Phong remote control center, the basic features of the SCADA/DMS central software system have been fully exploited such as: managing the grid information model including managing all the main data of the network. control center, edit or create new single-strand diagram structure of TBA, color grid, edit graphics, batch data import, declare and map signals of equipment at TBA and devices on the distribution grid (Recloser/LBS/FI), set up audio and event alarms, simulate the status of equipment on the grid, store, analyze and exploit historical data on the system. In addition, Hai Phong remote control center is gradually deploying and building a smart grid subsystem (DMS) with grid computing applications such as: load reporting, distribution estimation, capacity flow calculation, fault locating and isolation, etc. Operations Engineer at Remote Control Center The conversion of manned 110kV substations into 110kV unmanned substations helps to promote the application of digital technology, innovate and improve the management and operation process of the power system. As of May 27, 2021, the Company has 07/24 110kV substations operating with unmanned criteria, 09/24 110kV substations operating in remote operation mode with on-site supervision. 70/90 devices (Recloser/LBS) on medium voltage grid are connected and controlled remotely from Hai Phong Remote Control Center. With 99% success rate of remote manipulation ( As planned in 2021 put 110kV and . substations control devices Recloser/LBS rest perform remote control) contributed to improving labor productivity, reducing system operating costs, improving reliability of power supply and ensuring safe grid operation. In early 2021, Hai Phong PC applied digital technology to develop software for automatic ground fault handling. The software is currently being put into trial operation. Automatic ground fault handling software is highly applicable, helping to automate the current ground fault handling process, reducing the time to find fault points, and minimizing the number of customers. affected by incidents, thereby reducing power supply reliability indicators SAIDI, SAIFI, MAIFI, improving power quality, avoiding confusion that may occur due to subjective factors of users caused by operation. Automating the troubleshooting process enhances worker productivity by reducing the dependence of the troubleshooting process on the operator. The software is a premise for the development and expansion of advanced applications in the process of modernizing the distribution grid towards operating the smart grid in Hai Phong city. With efforts and determination to realize the goal of digital transformation, Hai Phong PC in particular and the Power industry in general are gradually implementing innovation, creativity, digital technology integration and production management model. business, technical management, making an important contribution to the digital transformation roadmap of the Electricity industry in order to improve the quality of customer service, to meet the needs of socio-economic development of Hai Phong city.

Hanoi Plastics focuses on investing in developing the mold field. The key to helping Hanoi Plastics “accelerate” “Independent and proactive in technology is a big dream of many businesses. And in order to realize that dream, it is necessary to research and develop (R&D), invest in facilities and people, especially a team with good expertise, understanding background knowledge. Gathering this team, creating conditions for them to rub and resonate is a priority in the field of supporting industries today,” said Mr. Bui Minh Hai, Chairman of Hanoi Plastics Joint Stock Company. When focusing on this field, An Phat Holdings Group has researched and given clear orientations and strategies to carefully build infrastructure, invest in equipment, and apply technology for manufacturing. get important details and components for big companies. In particular, the Group has invested and turned Hanoi Plastics into an enterprise capable of designing and manufacturing all kinds of molds from super-precision to large-sized molds serving the automotive industry, but few enterprises which can be done in the country. Instead of having to cooperate with one or more third and fourth parties to design, manufacture and test molds, which increases costs and production time, the end-to-end finishing of products within the company. The company will improve quality and reduce costs. With two factories in Hanoi and Hai Duong, especially possessing a modern mold system, Hanoi Plastics is now competitive enough to strongly develop this segment. In particular, the company attaches great importance to the development of core human resources. When working with FDI customers, Hanoi Plastics completes the basic criteria required by partners, then coordinates with consultants to come up with products that exactly meet partners’ requirements. Every year, the company organizes training and retraining of key human resources, sending to participate in training courses, training with research experts and offering effective solutions in production labor. “We believe that, in order to create components with high complexity and high intelligence, the human resource strategy is an extremely important strategy,” added Mr. Hai. In addition, Hanoi Plastics plays an important role in supporting industry development programs organized by the Ministry of Industry and Trade, in order to expand, connect trade, and share experiences with many businesses and ministries. , departments, branches in the same field. The company has been actively participating in production improvement cooperation programs of the Ministry of Industry and Trade in combination with FDI enterprises. Members of Hanoi Plastics An Trung Industries Limited and Vietnam Precision Mechanics and Mold Manufacturing Company Limited (VMC) are also evaluated by FDI enterprises as excellent enterprises in their improvement and growth programs. steps in improving production capacity and quality control. Revenue plan of VND 1,900 billion in 2021 The factory is supported by foreign experts to design and install according to strict standards. In 2021, Hanoi Plastics focuses on researching and developing new products, promoting its strengths in manufacturing plastic molds and industrial products, targeting Japanese customers and FDI companies. At the same time, the company maintains and develops existing customers in the field of plastic components for automobiles – motorcycles, electrical – electronics such as Toyota, Honda, Panasonic, LG, Piaggio, Samsung, Brother, Foxconn… Especially, this is also the year the member companies of Hanoi Plastics run at full capacity, deeply participating in the value chain of supporting industries. In particular, VMC with a capacity of 230 plastic injection molds/year will meet diverse needs from customers of cars and motorbikes, to customers of printers and computers to electronic devices such as televisions and phones. An Trung Industries Co., Ltd. expands its electronic product portfolio, targeting FDI companies manufacturing mobile phones. At the end of 2020, An Trung Industries was also selected by Foxconn as a supplier. This is a new factor, opening more growth opportunities for Hanoi Plastics in 2021. To realize this strategic goal, the entire factory, infrastructure, human resources, and production equipment are synchronized according to the strict standards of customers, supported by foreign experts directly. design and installation assistance. With those steps, Hanoi Plastics sets its business plan in 2021 as revenue of VND 1,900 billion, up 78.5% compared to 2020, profit after tax of VND 150 billion, going deeper into the global value chain. .

In other words, one regime can only win over another if there is higher labor productivity. The 2008 Nobel Prize-winning American economist Paul Krugman said: “Productivity is not everything, but, in the long run, productivity is almost everything. Whether a country can improve its quality of life depends almost entirely on whether it can raise output per worker.” Nobel Prize-winning economist Paul Krugman commented on the importance of labor productivity The Digital Transformation process leads to an important consequence, which is a dramatic acceleration of productivity through: 1) Maximum support of digital technologies and data; 2) The transformation of the organizational model; and 3) Changes in the structure and nature of economic activities. The increase in efficiency of economic activities based on technology and digital data creates innovative breakthroughs in providing new ways to increase productivity and create value, while helping to The digital economy has become a major component of the economy. Robert C. Lieberman (2012) wrote: “Changes in technology, especially the information revolution, have transformed the economy, making workers more productive and gaining important positions for the workforce. mental labor rather than manual labor. At the same time, the emergence of global markets, which itself has been accelerated by information technology, has dented the once dominant US manufacturing sector, and reoriented the US economy. to the service area. The service economy also rewards educated people with high-paying professional jobs in finance, healthcare and information technology.” This has suggested important implications for examining the dialectical relationship between productivity and digital transformation in the current context and its role in increasing the share of the digital economy in the economy. To evaluate productivity, we can rely on four important components: One is n platform of productivity is the creation of value and thus the value created determines the measures of productivity. A person who works hard for 8 hours a day only creates a value of 10 dong, will not be able to have a high labor productivity as a person who also works 8 hours a day but creates a value of 50 dong. Therefore, it is necessary to understand that the increase in productivity is not more labor effort, better skills, but the most important thing is to grasp how to create new value in the modern era. The present is how to be able to catch up, adapt and find ways to create those values. Digital transformation is not basically the application of digital technology and data to help “work more” or “work better”, but the most important thing in Digital Transformation, which is towards a new form of social organization to create a new source of capital, data capital, which helps to create a breakthrough in value, allowing a breakthrough in adding value to labor. Monday, S The change of economic/business model has an important significance in increasing productivity. In innovation, the value of innovation, that is, building on the foundation of existing models and innovating to increase efficiency will always be of critical value and can only increase at a finite rate. and tends to slow down. Thus, increasing productivity solely on the basis of the old model will not allow to expand the value – the basis of productivity, and thus also limit the possibility of increasing productivity. Converting numbers starting with requires a creation overate ( disruptive innovation ) , in which the transformation of the economic/business model is an indispensable, first and conditional requirement for the real Digital Transformation to take place. Tuesday , The transformation of the way we organize, operate and create value mechanism as a result of changing economic/business models. Digital transformation will create platforms, networks and communities/social-ecosystems as new ways to organize economic/economic activity. business, how these organizations connect to each other, and how these organizations converge. This will allow a change in the way productivity is conceived, from being based primarily on the capabilities that a single individual/organization can create through its efforts to create efficiency, to synergies. between individuals/organizations through interconnection into a platform, into networks and into social communities/ecosystems. This allows to create new productivity values ​​that go beyond individual capacity, increasing productivity based on the size, spread and resonance of the network connections that individuals/organizations have. This can be connected. Wednesday, c technology and digital data, which are popular with AI, Bigdata, IoT and Clouds technologies enabling humans to increase computing power and efficiency for better, more efficient, faster and more multifaceted data-driven decision making. It is this that allows people to get help to overcome biological, physical and space-time limitations to increase their results. Therefore, the increase in productivity is also extended to the ability to effectively apply and apply technologies to work and daily life. Accordingly, from analyzing the consequences of increasing productivity thanks to the Digital Transformation process, we can also establish the bases that help shape the digital economy and the proportion of the digital economy in the economy: The change in the way new value is created and valued based on the application of technology and digital data will make the economy play a particularly important role in the process of transforming traditional economic activities. system in a new way that creates faster, higher value-added and widens value frontiers. The change in the economic/business model through disruptive innovation will help break down the existing value creation structures, open up new value creation platforms, and enable the digital economy to open up. completely new economic/business activities in the digital era, contributing to increasing the development and affirming the position of the digital economy. An important new feature of the digital economy in the digital era is the change in the way society is organized to help create value synergies through platforms, networks and networks. community/social-ecosystem. This allows for increased growth when measured in space-time dimensions. Digital economy applies advanced technologies and digital data to create new means, tools and methods to increase the efficiency of human labor activities, contribute to creating value, open expanding consumption and creating new ways of doing business/economic activity, allowing new platforms for growth and development to be created.

Samsung Display’s dominance is being threatened by Chinese companies In particular, when Apple adopted OLED panels instead of LCD panels starting with the iPhone 12 series in 2020, the use of OLED panels increased sharply. Recently, Chinese display companies are entering the small and medium-sized OLED panel market, increasing the supply of low-cost panels. Omdia estimates that Apple will use the largest number of OLED panels for smartphones next year. It is expected that Apple will use 169 million OLED panels in 2021 and 190 million panels in 2022. Most likely they will use OLED panels for new products expected to launch in the second half of 2021. Meanwhile, Samsung is also expected to use 155 million OLED panels in 2021 and 168 million panels in 2022, the second largest after Apple. Although Samsung Display is expected to maintain its No. 1 position in the global smartphone OLED display market next year, its market share is expected to shrink due to competition from other manufacturers. Chinese company. In fact, according to Omdia, Samsung Display’s market share has dropped from 86% in 2019 to 78% in 2020. Omdia forecasts that its market share will drop to 77% in 2021 and 65% in next. On the other hand, the market share of Chinese companies is expected to increase from 15% in 2021 to 27% in 2022. In particular, BOE, China’s largest display manufacturer, is expected to expand the market. share from 6% in 2021 to 13% in 2022. Regarding this, Omdia said: “Chinese display companies are improving their technical skills. China will be a major threat to South Korea’s leading position in the OLED display market.” Phan Van Hoa (according to Businesskorea)

Previously, on May 10, the first 6 patients received radiation therapy during the day here. After radiation therapy is indicated, the patient is taken to the radiotherapy area for simulation. The simulation area is equipped with 2 16-slice CT machines, which can perform 3D, 3D simulation techniques with contrast and RPM breathing synchronization system for high-tech 4D radiotherapy (radiotherapy). modulated according to the patient’s breathing rate). The first patient underwent CT simulation before radiation therapy at facility 2, Ho Chi Minh City Oncology Hospital. Photo: BVCC After simulation, the CT data is transferred to the radiotherapy planning room for optimal radiation therapy planning personalized for each patient. Once the radiotherapy plan is approved by the treating physician and engineer, the data is transferred to the radiation machine to prepare the patient for radiation therapy. According to the leader of Oncology Hospital, when the professional processes and equipment system operate stably, the hospital’s facility 2 rapidly increased to receive the number of patients to the radiation treatment area. With 6 accelerated radiotherapy systems, the serving capacity of the radiotherapy area at facility 2 can accommodate 240-400 radiotherapy sessions per day. This helps to completely solve the overload of radiation therapy at the main facility of Oncology Hospital (Binh Thanh District) for decades. According to the plan, from May 19, the main facility of Oncology Hospital will continue to bring outpatients of internal block to facility 2 for further treatment and chemotherapy during the day. With a design of 100 beds, the day chemotherapy facility 2 is capable of treating 300 patients per day, reducing the number of day chemotherapy sessions by 70-80% at the main facility. Also from this time, Oncology Hospital will start to schedule appointments for patients who are being monitored after finishing chemotherapy and radiotherapy at the main facility to switch to re-examination at facility 2. According to the threading route, patients from the provinces and Thu Duc city (accounting for about 80% of day treatment patients at the main facility) will be introduced and guided to facility 2 for treatment. Particularly, the main facility is for patients in the remaining districts of Ho Chi Minh City.

Industrial design students Minwook Paeng have just come up with a solution to make it easier to use your smartphone while on the road: the Third Eye robot eye. This is an eye-shaped robot that is fixed on the user’s forehead and detects obstacles in front of them when they use their smartphone on the road. This humorous device allows users to navigate while texting or surfing Instagram without worrying about being obstructed by real-world obstacles. This artificial eye has a translucent plastic shell, with internal components based on the open source electronic platform Arduino. It will be applied to your forehead with a thin gel pad. The device is integrated with a speaker and an accelerometer, which is a sensor commonly found on smartphones used to detect the orientation of the phone and automatically rotate the screen when necessary. The device is integrated with a speaker and an accelerometer, which is a sensor commonly found on smartphones used to detect the orientation of the phone and automatically rotate the screen when necessary. The accelerometer on the Third Eye detects when the user’s head is bent to open the plastic eyelid, revealing a sonar sensor. When detecting an obstacle ahead, the eye will emit a buzzing sound to signal the user. The use of mobile phones while crossing the street is increasing and affects public safety on the street. Even the city of Montclair in Southern California (USA) has introduced a law banning pedestrians from using phones or wearing headphones while walking across the street. First-time offenders will be warned, if they repeat the offense for the second time, they will be fined $100 (about 2.2 million VND), if they repeat the offense many times, the fine will be up to $500 (about 11 million VND). A scientific study has confirmed: people who use mobile phones will walk slower and even go sloppy. Due to paying attention to the phone screen so as not to type the wrong content or read the message correctly, the human observation ability will be narrowed, limiting the ability to detect obstacles and not avoid timely. As a result, accidents can happen whenever, for example, hitting other people or crashing into traffic. Please watch the video: Robot make in Vietnam knows how to do math. Source: VTV

One of the first patients performed CT simulation before head and neck radiotherapy on the same day – Photo: BVCC Oncology Hospital 2 basis (Ho Chi Minh City) has just said that the first 6 patients have received radiation therapy for the day here. At this new hospital, all of them had a simulated CT and radiotherapy on the same day that the patient came for follow-up appointment, while at facility 1 (Ho Chi Minh City Oncology Hospital), the patient was after CT for the simulation, it takes an average waiting time of 2 weeks for radiation therapy. Thus, the Radiation Therapy Area of ​​the Day 2 Baseline Oncology Hospital officially came into operation, starting a roadmap to deal with overcrowding of patients for decades at Primary Oncology Hospital 1. After the State Construction Inspection Department (Department of Inspection) approved in writing to allow the acceptance and commissioning of basements 1 and 2 of the Basement 2 Oncology Hospital, the Management Board attended. The investment project to build civil and industrial projects in Ho Chi Minh City has handed over to the Oncology Hospital all the facilities in basement 1 and basement 2, where the radiotherapy area of ​​the hospital will be deployed. With an area of ​​more than a thousand square meters, equipped with 2 simulation CT systems, 6 accelerated radiotherapy systems, 2 brachytherapy systems and 9 outpatient clinics, this is an integrated simulation, setting up area. treatment plan, external radiation therapy, brachytherapy and outpatient examination, forming a closed day treatment process of radiotherapy at Primary Cancer Hospital 2. After receiving an indication of radiation therapy from the treatment department, the patient was taken to the radiotherapy unit for a simulation. The simulation area is equipped with 2 16-slice CT machines, which can perform 3D, 3D simulation techniques with contrast, comes with RPM breathing synchronous system for high-tech 4D radiotherapy ( modulated radiation therapy according to the patient’s breathing rate). After the simulation, the CT data are transferred to the radiotherapy planning department to perform the positioning of the radiotherapy volumes and healthy organs, calculate the irradiation field parameters, dose, shielding, … treatment. to get an optimized personalized radiation treatment plan for each patient. When the radiotherapy plan is approved by the treating doctor and the engineer, the data is transferred to the radiotherapy machine to prepare the patient for radiotherapy. The daily plans will be checked and measured directly on the machine to ensure the quality of treatment (the actual dose delivered on the machine must be the same as the dose set in the software). If all are satisfactory, the patient will be treated on a radiograph. Primary Oncology Hospital 2 has put into operation 6 image-guided radiotherapy machines (IGRT) that can perform advanced techniques in current radiotherapy: Electron, 3D, IMRT, VMAT . In addition, the radiotherapy machine can perform SRS / SBRT (Hyper Arch) radiotherapy, breathing radiotherapy, control surface movement. Medical physicist working with radiotherapist in planning radiotherapy at Primary Cancer Hospital 2 Oncology Hospital’s Board of Directors said that when the specialized processes and the equipment systems are working stably, Primary Oncology Hospital 2 will rapidly increase the reception of the number of patients coming to the radiotherapy area. With 6 accelerated radiotherapy systems equipped, the service capacity of the radiotherapy area at facility 2 can meet 240-400 times of radiation therapy per day, capable of resolving the overload situation. Radiation therapy for Primary 1 Cancer Hospital for decades. According to the plan, from May 19, 2021, the Oncology Hospital will continue to bring outpatients of the internal group to the 2 primary Oncology Hospital for continued treatment and chemotherapy during the day. With a design of 100 chemotherapy beds a day, the 2nd Primary Oncology Hospital’s Day Chemotherapy area is capable of chemotherapy 300 patients per day, which will reduce 70 – 80% of the number of chemotherapy during the day. basis 1. In addition, from this time, Oncology Hospital will start appointing patients who are monitored after the end of chemotherapy, radiotherapy at facility 1 to be re-examined at Primary Cancer Hospital 2. According to the patient diversification roadmap to reduce the load for primary cancer hospital 1, patients from the provinces and cities of Thu Duc (accounting for about 80% of day treatment patients of Primary Cancer Hospital 1) will be Introduction and guidance on facility 2 for treatment, facility 1 will be for patients of the remaining districts of Ho Chi Minh City. When the inpatient treatment area of ​​Primary Cancer Hospital 2 is officially handed over, all the inpatients of Primary 1 Cancer Hospital will be transferred to the new facility.

The patient first had a simulated CT scan before receiving head and neck radiation According to Associate Professor-Dr. Tang Chi Thuong, Deputy Director of the Ho Chi Minh City Department of Health, right after the State Department of Construction Inspection (the Ministry of Construction) has issued a written approval to allow acceptance and commissioning of the basement. 1 and 2 basement of Oncology Hospital 2, Ho Chi Minh City Investment and Construction Project Management Unit of Ho Chi Minh City has handed over to the Oncology Hospital all the facilities in the basement. 1 and 2 basement, where will deploy the Radiation treatment area of ​​the hospital. The radiotherapy area of ​​the day covers an area of ​​more than 1,000 square meters, is equipped with 2 simulation CT systems, 6 accelerated radiotherapy systems, 2 brachytherapy systems and 9 outpatient clinics. This is an area that integrates simulation, treatment planning, external radiation therapy, brachytherapy and outpatient examination to form a closed day-to-day radiotherapy treatment at Primary Cancer Hospital 2. Accordingly, after the patient has prescribed radiation therapy from the treatment department, the patient is taken to the Radiotherapy Area to perform the simulation. The simulation area is equipped with 2 16-slice CT machines, which can perform 3D, 3D simulation techniques with contrast, comes with RPM breathing synchronous system for high-tech 4D radiotherapy ( modulated radiation therapy according to the patient’s breathing rate). After the simulation, the CT data are transferred to the Radiotherapy Planning Department to perform the positioning of radiotherapy volumes and healthy organs, calculate the irradiation field parameters, dose, shielding, … treatment. to get an optimized personalized radiation treatment plan for each patient. When the radiotherapy plan is approved by the treating doctor and the engineer, the data is transferred to the radiotherapy machine to prepare the patient for radiotherapy. The daily plans will be checked and measured directly on the machine to ensure the quality of treatment (the actual dose delivered on the machine must be the same as the dose set in the software). If all are satisfactory, the patient will be treated on a radiograph. At present, Baseline Oncology Hospital 2 has put into operation 6 image-guided radiotherapy machines (IGRT) that can perform advanced techniques in radiotherapy today: Electron, 3D, IMRT, VMAT. In addition, the radiotherapy machine can perform SRS / SBRT (Hyper Arch) radiotherapy, breathing radiotherapy, control surface movement. It is expected that, when the professional processes and the equipment systems are in stable operation, the 2nd Primary Oncology Hospital will rapidly increase the number of patients coming to the radiotherapy area. With 6 accelerated radiotherapy systems equipped, the service capacity of the radiotherapy area at facility 2 can meet 240-400 times of radiation therapy per day, capable of resolving the overload situation. radiation therapy for Primary 1 Oncology Hospital for decades. According to the Ho Chi Minh City Department of Health, on May 19, the Oncology Hospital will continue to bring outpatients of the internal block to the 2 primary Oncology Hospital to continue treatment and chemotherapy during the day. . With a design of 100 chemotherapy beds a day, the 2nd Primary Oncology Hospital’s Day Chemotherapy area is capable of chemotherapy 300 patients per day, which will reduce 70 – 80% of the number of chemotherapy during the day. basis 1. In addition, from this time, the Oncology Hospital will start appointing patients who are monitored after the end of chemotherapy, radiotherapy at facility 1 to be re-examined at the Primary Oncology Hospital. 2. When the inpatient treatment area of ​​the 2nd Primary Oncology Hospital is officially handed over, all the inpatients of the 1st Primary Oncology Hospital will be transferred to the new facility.

Businesses are looking for solutions to digital transformation. The announcement was made at Huawei Developer Conference (HDC.Cloud) 2021, which took place at the university complex in Shenzhen, China. Mr. Richard Yu – Huawei CEO – said: “By 2025, 100% of businesses globally will use cloud technology. The cloud is the future of the ICT industry and the foundation for the digital transformation of businesses. Developers are the soul of the industry. Huawei will continue to expand its technology innovation capabilities and work with developers and partners to accelerate cloud-based business and smart transformation. Accordingly, the Huawei representative launched 6 innovative products and services, including the cloud cluster in the form of the HUAWEI CLOUD CCE Turbo container, the intelligent programming assistant CloudIDE, the database GaussDB (for openGauss), Trusted Intelligent Computing Services (TICS), Pangu Models, and infrastructure software for diverse computation. Mr. Richard Yu – Huawei CEO – spoke at the event. In addition, Huawei announced a $ 220 million investment in the Huawei Developer Program 2.0 this year. The program includes innovation activity for Huawei Cloud partner, Kunpeng OpenMind project and Ascend OpenMind project. This support pack aims to boost the ecosystem around Huawei Cloud, Kunpeng, and Ascend. The program covers six engineering areas, including container / microservices, SaaS, big data, AI, video and smart edge. After successfully building an industry ecosystem with 2.4 million developers, Huawei worked with the Ministry of Education of China to build a smart platform for collaborating on talent education. Currently, this business is planning to provide software development training to 3 million university developers over the next 5 years. In addition to the seminar program, the HDC.Cloud 2021 event also includes technical conferences, training camps, programming labs, developer festivals and a series of forums that bring together famous teachers young people and influencers. The event revolves around the latest trends in cloud, AI, computing and open source.

WhatsApp is testing a Beta feature to speed up the playback of voice messages After a short activation, WhatsApp released a new version of Android beta 2.21.9.5 to disable this feature. This is arguably another surprise, because WhatsApp typically tests features for a few months before rolling out to public beta testers. This could be a buggy update from WhatsApp and has been quickly fixed. The interface for this version of WhatsApp has also been changed to better accommodate the new features. An icon appears right next to the voice message to perform accelerated operations that the user wants to hear again. In addition to playback acceleration, another feature also tested by WhatsApp is the ability to delete or make changes to a chat on just one active device without affecting any linked devices other. That is, changes or deletion of any chats through one handset will not be deleted from other linked devices. This is quite confusing because often performing a delete or change operation means that the content the user will not want to save on any device. If this feature is kept by WhatsApp, users will have to delete the chats multiple times on multiple devices. This feature is in line with what WhatsApp introduced previously, which is that each account can be importing up to 4 devices at the same time. However, the log out of all these devices is said to be in development, users still have to go to each device to remove the WhatsApp account. The new features that WhatsApp has introduced well for users to try out may see that it may be coming to many people soon.

Photo: Howtogeek In addition to the iPhone, iPad, Apple Watch, AirPods and MacBook lines, on April 20, 2021, Apple officially launched a new device called AirTag. This device is designed for users to track down and find lost items. This device has been rumored and expected for a long time and now it is officially released. Reasonable price AirTag selling price announced by Apple is $ 29, equivalent to about 700,000 VND. That figure is even $ 6 lower than the Tile Pro and on par with Samsung’s SmartTag +. Apple also offers more options for customers to buy four units priced at just $ 99. Early orders are scheduled for delivery on April 30th. Compact design Photo: Macrumors AirTag comes in the form of a white round knob with a metal plate on one side and is slightly larger than the bottle cap. They measure 1.26 inches in diameter and 0.31 inches tall and weigh 0.39 ounces (11 grams). For each Airtag, customers get free engraved names, including text and a choice of 31 emojis, when purchasing from apple.com or the Apple Store app. Hardware This device has a built-in audio speaker that makes it easy to locate the Airtag. Each AirTag has an integrated accelerometer, a replaceable CR2032 battery and can be used continuously for 1 year thanks to the energy-saving Bluetooth LE technology. Users can click on the back of the Airtag to replace the battery for their device. The way it works is simple Photo: CNBC Initially, users will connect AirTag via iPhone, iPad, will have pop-up when the product is near iDevices similar to the general AirPods connection. When you tap AirTag in the Find My app, it uses input from the camera, ARKit, accelerometer, and gyroscope, then transmits the user signal to the AirTag privately using combines audio, tactile and visual feedback. When activated, Airtag will continuously scan and connect to any nearby iPhone, iPad, or Apple Watch to send information and location updates to users through their iCloud account. Optimized use with new iPhone models Photo: Mac World AirTag requires only iPhones running iOS 14.5 and iPads running iPadOS 14.5 to function. This iOS 14.5 / iPadOS 14.5 update will arrive next week, before the accessory goes on sale. This means that all iPhones from the iPhone 6s and later use this device. However, if you own an iPhone with U1 chip, that is, iPhone 11 and above you will make the most of AirTag’s capabilities. With U1 chip, you can easily orient accurately as well as calculate the distance from you to objects. Is the Airtag waterproof? According to Apple’s Newsroom, the AirTag is IP67 water & dust resistant. That is, it sinks 1 meter of water for 30 minutes, and normal daily circumstances will not affect AirTag when you let it get caught in rainwater, splashing water, dust, sand, … Airtag connection range Although not officially confirmed by Apple, many sources have said that the device can connect and work well with a maximum range of up to 100 meters. At this distance you can easily find your objects with precise navigation and distance measurement in the Find My app. How to find a lost item with Airtag Photo: CNBC When the user’s device is out of range of Bluetooth connectivity, the device relies on the Find My network with more than 1 billion Apple devices globally. Apple devices near the AirTag will scan and find it, when found, it will transmit the signal to a device connected to the network and send location information back to the owner. In addition, even when there is no iOS device nearby to detect, AirTag itself, when detached from the host iOS device for too long, will make a noise for others to see it. Those who find AirTag can use an iOS device or any NFC device to view the information of the owner of the AirTag. Security Apple believes that location data and location history won’t be stored anywhere. In addition, all location information will be end-to-end encrypted and not stored anywhere.This also means that only the owner and the AirTag will read each other’s locations.

Photo: CNET In the US, users who have ordered AirTags may have to wait until May 3 for delivery. However, if you order a set of 4 AirTaggs, users can also receive the goods on April 30, according to MacRumors. Accessories for AirTags will also be delivered in May, while especially with the Hermes key chain accessory will not be available until June. Photo: CNET The fact that users want to engrave letters or emojis on AirTags can also affect delivery times. Called AirTags, this circular design allows users to track objects through the Find My app in iOS. Photo: CNET Similar to the previous product lines such as Tiles, AirTags are useful for tracking items such as wallets or keys. Users will receive notifications when they are away from the location of the tracked objects. Photo: The Verge AirTags is equipped with a built-in speaker, accelerometer, Bluetooth LE connectivity and a user-replaceable battery. Apple says the device’s battery can be used for a year, while users can use close-range touch gestures (NFC) to activate the lost objects mode. Each AirTags is also equipped with an Apple U1 chip that uses Ultra Wideband technology to let users know more exactly where their objects are.

Audi unveiled up to four brand-new models this week at the 2021 Shanghai Auto Show, where the stretched A7L and A6 e-tron sedans garner the most attention. The two models share the stage with an upgraded long wheelbase Q5 and a mysterious new Audi Shanghai concept in the form of an all-electric SUV. While the A7L will be the first Audi model in China developed with local Volkswagen Group partner SAIC – other models developed with another partner FAW – this new electric vehicle is not far behind. . Considered a research concept at the moment, it will evolve into a production car in the second half of this year. Details are still scarce, but we do know that it will be 4,870 mm long. The figure on this electric luxury Audi Shanghai makes it nearly as long as the Audi e-tron SUV currently sold in many parts of the world, and some local sources say it will be built based on Volkswagen’s MEB chassis. Group, similar to the Q4 e-tron and the smaller Q4 Sportback e-tron. The concept car shown at the show has a camouflage cover with an e-tron mark and all the windows are darkened, meaning the company is not ready to reveal the interior of the new car. With Audi quiet, all we can do is speculate. Considering the announced overall length of the car, perhaps the production version will be equivalent to the Volkswagen ID.6 that also debuted at this year’s Shanghai Auto Show. That three-row electric SUV also uses the MEB chassis and measures 4,876 mm in length. However, this is merely a speculation. If that is the case, we can expect the best version of the new electric SUV to be equipped with the AWD Quattro drivetrain with 2 electric motors delivering a total output of 302 hp and 310 Nm of maximum torque. the equivalent of the dual-motor ID.6, or even more powerful, to deserve the Audi title. At ID.6, this capacity allows it to accelerate from 0-100 km / h in 6.6 seconds and the top speed is electronically limited to 160 km / h. In terms of travel distance, we can also see ID.6 modeled with two options of 58 kWh and 77 kWh, with the second type providing a maximum travel distance of 588 km / h according to the Chinese NEDC cycle. . Time will tell what real specs will be on the new Audi electric SUV. The model on display only has a simple name, the new electric Audi Concept Shanghai, and will certainly bear a different name when it goes into production. Also, it is worth noting that this model will be exclusive to the Chinese market. Video: Audi introduces a series of luxury electric cars in China.

Smartphone maker Huawei launches the first car model Huawei is best known for making smartphones, but the Chinese tech giant is planning to invest $ 1 billion in research into electric vehicle technology and self-driving cars. As part of that plan, at the ongoing Shanghai Auto Show, Huawei officially introduced its first self-made model, the Huawei Seres SF5. The SF5 stands out with its elongated headlamp, reverse claw, LED daytime running lights and a mesh grille with body color. Hidden door handles in the bodywork with a rounded overall style. Inside the interior compartment, the SF5 is equipped with a digital clock, two-spoke steering wheel, next to a dial selector. The materials used to decorate the cabin include wood and metal. Mood lighting, sunroof, heated front seats, cooling and massage mode are all other options on the car. Huawei can connect to smartphones and automatically deliver music and positioning information between the two sides. Also equipped with voice control technology and audio system with 11 speakers. Engineers also focused on noise and vibration reduction, demonstrated through the addition of double-layered front glass and a variety of damping materials. The interior noise is only 38 dB in idling mode, according to the company. SF5 is also equipped with mm-frequency radar, ultrasonic sensors, a series of cameras, adaptive cruise control, traffic congestion assistance, automatic emergency braking, lane keeping assist and collision warning. front. The 1.5-liter, 4-cylinder engine acts as a generator. The vehicle is equipped with a battery pack that powers two electric motors with a capacity of 543 hp and 820 Nm of torque. SF5 is capable of accelerating from 0-100 km / h in 4.7 seconds. In pure electric mode, the car can run 180 km and with the help of a gas generator, the mileage is more than 1,000 km. Seres SF5 is currently on display at the Shanghai auto show and will be available in Huawei showrooms soon. Expected selling price is 33,356 USD (about 770 million VND) and delivery may start in May. See also some pictures of Huawei Seres SF5:

Hongqi S9 PHEV – China’s first hypercar is revealed Hypercar is now considered a rare and expensive car, not only prone to amazing speed and power, they are also built with rare materials and limited quantity. Because of the different qualities of conventional supercars, the hypercar is the target of the Silk-FAW joint venture, which was just established earlier this year in Italy. In particular, the design leader is not unfamiliar with the charismatic world, is Walter de Silva, who is responsible for models such as Alfa Romeo 156, VW Scirocco, Audi R8 and A5. The Hongqi S9 PHEV bears the mark of Italian designer Walter de Silva The new image of the Hongqi S9 PHEV next to the recent Italian designer looks different from the previous concept. This may be the production limited to 99 units worldwide. Silk-FAW has yet to reveal the full specifications of the car, but it will be a plug-in hybrid hypercar, combining a 4.0-liter V8 engine and an electric motor. Total power is expected to be 1,400 horsepower and the “monster” four-wheel drive is said to be able to accelerate from 0 to 100 km h in 1.9 seconds before hitting the finish at 400 km / h, fast. 0.27 seconds more than the Bugatti Bolide – today’s fastest hypercar. The car includes 2 seats and opens the diagonal door like supercars often found from Italy At launch, Hongqi said the S9 will have at least three driving modes, including a pure electric mode for city driving. The battery pack is said to provide a range of up to 40 km on a full charge. Outside, the car stands out with a long tail and rear spoiler, air intakes around the LED taillights, carbon fiber air intakes integrated into the headlights. The car has an aerodynamic design No photos of the interior have been released, but Silk-FAW says the cabin has been designed for maximum comfort. Users will have 3 touch screens: two for the driver and one for the passenger. Additionally, the ambient lighting with LEDs is changeable, as well as the smart electric window with customizable color intensity. The Hongqi S9 will appear at Auto Shanghai 2021 and the images above serve as a greeting from famous designer De Silva after his return. It is expected that the first S9 will be delivered in 2022 with a selling price of about 10 million yuan (about 37 billion VND). Dinh Quy (According to Paultan) Invite readers to collaborate, send news articles about Motorbike Department by email: otoxemay@vietnamnet.vn. Appropriate content will be posted. Thank you!

Huawei is a brand that produces smartphones worldwide famous. However, it seems that Huawei not only wants to stop at smartphone production, but also encroach on the automotive segment. Participating in the 2021 Shanghai Motor Show, the first Huawe electric car was officially unveiled. Called by its full name Seres Huawei Smart Selection SF5 2021, this car carries a crossover style. This is a model created by Huawei, along with partner Seres based in California, USA. In terms of size, Huawei SF5 has a length of 4,700 mm, width of 1,930 mm, a height of 1,625 mm and a wheelbase of 2,875 mm. With this size, the Huawei SF5 is listed in the midsize crossover segment, similar to the Hyundai SantaFe and the Kia Sorento. Outside, the SF5 has a design that is almost unchanged from the concept car of the same name that the Seres brand introduced in 2019. The car is equipped with slim headlights, clawed back. Meanwhile, the L-shaped daytime positioning LED strip embraces the headlight cluster. Right below is the front fog lamp with a boomerang-shaped design and embraces the 2 air slots on the front bumper. In the center position of the front of the car is the grille with a mesh of canopy. Similar to many new models today, the electric Huawei SF5 also comes with a door handle that sinks into the body and can be turned on when needed. Meanwhile, the car’s window glass is designed as soft wings. Next is the slope to the back and the alloy rim with a 5-spoke design, 2 color combinations. Behind, the first Huawei car comes with LED taillights connected by a strip of lights in the middle, the roof spoiler with integrated overhead brake lights and a fake wind diffuser under the rear bumper. Inside the Huawei SF5 is the interior space designed in a minimalist style, clearly shown through the dashboard. Here, we will see the air-conditioning vents stretching across the width of the dashboard, interrupted by the large touchscreen display as well as the digital instrument panel. This central screen connects to a HiCar system based on Huawei’s Harmony OS. With this system, users can connect their smartphones to the vehicle, synchronize and control smart devices through the touch screen. Below the infotainment screen there is no center console cluster, but a storage compartment with a cover. Meanwhile, the car’s gear knob is located right in front of the center armrest. Adding to that is the 11-speaker Huawei Sound sound system, which promises to bring a theater-like experience to the occupants of the car. This system works to prevent unwanted outside sounds from entering the car and combines with the double-layer soundproof glass as well as a damping system to provide a quiet interior for the Huawei SF5. The power supply for the Huawei SF5 is 1 electric motor or 2 electric motors, depending on the version. Meanwhile, the 4-cylinder petrol engine, turbocharged, 1.5L capacity only plays a role to charge the battery, increasing the range of operation for the car. In version 2 electric motor, 4-wheel drive full time, this crossover model owns a maximum capacity of 543 horsepower and a maximum torque of 820 Nm. As a result, the car can accelerate from 0-100 km / h in nearly 4.7 seconds, run 180 km with an electric motor and add 1,000 km if the gasoline engine is involved. When needed, the battery of Huawei SF5 can be used to charge electrical equipment such as TVs. Not only fast and powerful, Huawei SF5 also has modern safety equipment such as driver assistance in traffic jam, adaptive cruise control, forward collision warning, automatic emergency braking and vehicle entry. in the middle of the lane. That is not to mention the level 2 semi-automatic steering assistance system, which uses high-precision mm wave radar and ultrasonic radar. In the Chinese market, Huawei SF5 is divided into 2 versions: 1 electric motor and 2 electric motors. The corresponding Huawei SF5 2021 car prices of these two versions are 216,800 yuan (769 million dong) and 246,800 yuan (876 million dong). Video: Detail Seres Huawei Smart Selection SF5 2021.

What products accelerate fat burning? (Photo: Pixabay) Accordingly, the experiment involved 15 men who did not smoke, whose average age was 32 years. These people completed 4 exercises 7 days apart. On the day of the trial, they took 3 mg / kg of caffeine or a placebo at 8 o’clock and 17 hours, and followed strict exercise and dietary guidelines. The results showed that the amount of caffeine consumed 30 minutes before aerobic exercise increased maximum fat oxidation in the whole body. In addition, the scientists found that the efficiency was significantly higher when performing a series of exercises in the afternoon. Espresso is a very popular coffee and is popular with many people. Espresso first appeared in Italy in 1930, then spread to Spain and other European countries. Currently, this coffee has become an indispensable part of the coffee culture of people around the world. Even many coffee fans often say that, if you have never tried Espresso, you have not really stepped into the coffee world. Espresso coffee is machine-brewed, using hot water compressed by high pressure through finely ground coffee powder. The broth used to make Espresso is pure water, and the coffee used to prepare this method must also be rustic roasted coffee, not seasoned with any impurities.

Slow throttle response is the most common sign on turbocharged engines. This is caused by a suspended exhaust, i.e. always open or a vehicle with a fuel delivery problem.

When the turbo doesn’t accelerate as quickly as before then the first issue to consider is the turbocharger. Likewise, when the turbo has trouble maintaining its speed or is unable to reach a certain speed threshold, it is possible that the turbocharger is faulty.

Slow throttle response is the most common sign on turbocharged engines

1. Increase fuel consumption

Another benefit of using turbochargers is increased fuel economy, so if you notice a significant increase in your vehicle’s fuel consumption, you have to bring your garage to the test. This symptom can be caused by a variety of problems including a leak in the turbo causing raw fuel to flow into the exhaust.

1. Excessive exhaust fumes

A turbocharger reduces emissions which means it also significantly reduces the amount of exhaust fumes emitted from the exhaust on both petrol and diesel engines.

When the amount of smoke is generated too much even when the engine has warmed up, it could be a sign of a broken turbo, namely a crack in the case or worn seals.

This causes fuel to leak into the exhaust system, significantly increasing the amount of smoke released from the vehicle’s exhaust (or exhaust). Blue smoke may indicate a worn or worn valve seal or piston ring.

When the smoke is generated too much even when the engine has warmed up, it could be a sign of a broken turbo

1. Loud shout

The turbocharged engine actually works quieter because it reduces the sound of the intake air. However, if you hear a loud screech coming from the engine compartment, it is a sign that the turbocharged engine is not working properly.

Generally the louder the noise, the greater the damage, the problems that cause this noise such as: damage to the fan blade, vacuum leak, damage to the divider valve or poor ECU Remap.

1. Check the engine lights

On most modern cars, the computer system will detect turbo damage. According to maintenance care experience, this is the first sign that a car’s turbocharger is having problems.