Duong’s pair of bottles from more than 10 million beer cans is considered a “unique” product. Mr. Nguyen Van Dai Duong’s pair of vases is 1.8 m high, 0.6 m wide at the widest place. It took him about 4 years (2014-2018) to complete this pair of water hyacinths. Photo: Nguyen Ngoc Mr. Duong said that the idea of ​​making items from beer cans was born in 2010. Since then, he has started collecting cans of a beer brand to make the colors of the items uniform. Photo: Nguyen Ngoc Over the years of collecting, Mr. Duong has had millions of beer cans. After thinking for a while, he decided to tie the beer can into a unique bottle. Photo: Nguyen Ngoc According to Mr. Duong, first create a frame for the pair to read the vase. Next, he used a fine fabric, cut it into a thin thread and threaded it through the ring of a beer can around the frame to create a unique vase. It takes thousands of rings to make a circle around the single-pot frame. Photo: Nguyen Ngoc “Only one broken eyelet has to be removed and redone. The hardest part is in the mouth and sole. I have to be skillful and meticulous to be able to connect the eyelets evenly, beautifully winding and not losing the object. worthy when arranging the rings,” said Mr. Duong. Photo: Nguyen Ngoc Duong’s pair of bottles from more than 10 million beer cans is considered a “unique” product. Many people came to see and offered to buy at a high price, but Mr. Duong still did not agree to sell. Photo: Nguyen Ngoc

A pair of water hyacinths 1.86m high has been made by Mr. Nguyen Van Dai Duong for more than 4 years. Photo: NGUYEN TRANG Mr. Duong said: “The idea of ​​making water hyacinth from cans of water since 2012 and I started collecting cans throughout 2014 to obtain a large amount”. After collecting, Mr. Duong washed and coated the cans with a shade to keep them for a long time. By 2015, Mr. Duong started to design a hyacinth, he used thin aluminum wire to knit, connect to form the frame of the water hyacinth. After that, he continued to use water pipes with a diameter of 20cm to be inserted inside to keep the water hyacinth standing upright. He used a smaller water pipe 17-18cm in diameter inside the original large pipe, the purpose of which can pour water and flower arrangements. All steps on the frame, the inner structure is complete, Mr. Duong continues to make the more difficult process of connecting the cans together and the boss overlaps in succession. “I used yellow spandex and cut thin enough to pass through the hole in the can. Use at least 10m of fabric to connect 10 million pieces of cans for each water hyacinth ”. According to Mr. Duong, the hyacinth base, knotted areas are the most difficult. He had to be skillful so that the water hyacinth wouldn’t lose its symmetry when it was placed from the bottom up. He had to remove and install it many times to make the base of the water hyacinth. Mr. Duong also made a tea kettle made of colorful cans. He said, in the near future, he plans to make more products from cans. >> Some pictures of a pair of water hyacinths made from a bottle of cans. Photo: NGUYEN TRANG The pair of water hyacinths is made from a box of 1.86m high All are connected by yellow elastic fabric between the holes Mr. Duong has done many times to make the bars straight and even The cans are joined by yellow spandex. Mr. Duong also made a teapot made of a variety of colorful cans The cans arrange colors according to a predefined layout

The unique pair of Mr. Nguyen Van Dai Duong. Photo: Tran The stand of Mr. Nguyen Van Dai Duong is 1.8 m high, with the widest diameter of 0.6 m. It took him four long years to combine millions of cans of beer into this single pair. A pair of unique cans are made from millions of cans of beer Mr. Duong, said that the idea of ​​making items from beer cans has sprung up since 2010. Since then, he started to collect a beer brand’s cans so that the color of the objects is homogeneous. Over the years of collection, Mr. Duong has millions of cans of beer. After a moment of thinking, he decided to turn the can of beer into a single pot. To make a pair of poisonous bottles, Mr. Duong used millions of cans of beer. Photo: Tran First, Mr. Duong created a frame for the pair of poisons. Next, he used a fine cloth, cut into thin fibers that were threaded through the cans of beer around the frame to create a unique vase. Making a circle around a unique frame takes thousands of pieces. Only one piece of fault is required to remove it again. Just like that, Mr. Duong worked diligently for 4 years to complete. The beer cans are formed. Photo: Tran According to Mr. Duong, the mouth and base are the two most difficult parts of the vase. It must be very meticulous to be able to make evenly curled, beautiful curves. “I started to finish it from 2014 to 2018 to finish it. As a result, I have to use millions of cans of beer to finish 2 pots,” said Duong. In addition to the bottle, Mr. Duong also made a number of items such as a teapot basket. Photo: Tran Mr. Duong’s unique pair of bottles from millions of cans of beer is considered “unique”. Many people came to see it very much and wanted to buy it at a fairly high price, but he had not agreed to sell.

It took more than 4 years, Mr. Nguyen Van Dai Duong completed a pair of unique bottles from millions of these cans of beer. Photo: Nguyen Ngoc A pair of unique bottles from more than 10 million pieces of beer cans of Mr. Duong is considered a “unique” product. The stand of Mr. Nguyen Van Dai Duong is 1.8 m high, with the widest diameter of 0.6 m. It took him about 4 years (2014-2018) to complete this pair of hyacinths. Photo: Nguyen Ngoc Mr. Duong said, the idea of ​​making items from beer cans has been around since 2010. Since then, he started to collect a beer brand from a beer brand to have a uniform color. Photo: Nguyen Ngoc Over the years of collection, Mr. Duong has millions of cans of beer. After a moment of thinking, he decided to turn the can of beer into a single pot. Photo: Nguyen Ngoc According to Mr. Duong, first create a frame for the pair to read the bottle. Next, he used a fine cloth, cut into thin fibers that were threaded through the cans of beer around the frame to create a unique vase. Making a circle around the frame takes thousands of cans of beer. Photo: Nguyen Ngoc “It only takes one thread to fail to disassemble and rework. The hardest part is the mouth and base. I have to be skillful and meticulous to be able to connect evenly, well-curled cans and not lose weight. It’s good to fold the cans, “said Mr. Duong. Photo: Nguyen Ngoc Mr. Duong’s unique pair of bottles from more than 10 million pieces of beer cans is considered a “unique” product. Many people came to see and offered to buy at quite a high price, but Mr. Duong did not agree to sell. Photo: Nguyen Ngoc