Train drivers union GDL resolves industrial action at the railway

Status: 23.06.2021 12:54 p.m.

With the beginning of the summer holidays in some federal states, rail passengers have to be prepared for strikes. The train drivers’ union GDL decided a labor dispute. The GDL intends to announce tomorrow exactly how it should look. At Deutsche Bahn, train driver strikes in the middle of the holiday season are getting closer. The union of German locomotive drivers (GDL) decided on concrete industrial action after failed negotiations with the employers’ association Move. GDL boss Claus Weselsky will not announce the exact scope and time of possible work stoppages until Thursday at a press conference in Berlin. According to the GDL, the corresponding committee resolutions are available. A railway spokeswoman asked the union to return to the negotiating table. There are well-founded offers for more wages and additional protection against dismissal on the table, about which the GDL top has so far refused serious negotiations.

First warning strike since December 2018

Immediately before the start of the school holidays in several federal states, the union is increasing the pressure on the management of the railway. The GDL declared the negotiations to have failed last Tuesday. It is the first warning strike on the railways since December 2018, when the Railway and Transport Union (EVG) called on its members to take part in a labor dispute. Both unions are fighting with each other for influence in the state company. The EVG had already reached a collective agreement last autumn. From the beginning of 2022, employees will receive 1.5 percent more money – little compared to collective bargaining rounds in better times. Compulsory redundancies are excluded until the end of 2023.

GDL wants more

The GDL wants to get more out of money and working hours. Both sides had moved somewhat towards each other before the failure of the negotiations. Based on the collective bargaining agreement for the public service, the GDL is calling for an income increase of 1.4 percent plus a corona bonus this year and a further 1.8 percent next year. The employees deserved more than compensation for the price increase, argues Weselsky.

According to its own statements, Deutsche Bahn had proposed increases in incomes as in the public sector, but in relation to the airport sector. An “emergency collective agreement” had been concluded for airports because of the slump in traffic. The 1.4 percent increase in income there will only be in October 2022, the other 1.8 percent not until April 2023. Employers will also have the option of reducing working hours by six percent in 2022. The level of the collective agreement for the public service is to be reached in October 2023

Industry Day Showing the Chancellor candidate

Status: 06/22/2021 6:12 p.m.

How can the climate change succeed and Germany be preserved as an industrial location? The Chancellor candidates gave outlooks at the Industry Day. In the end there was nothing more than friendly applause.

From Eva Ellermann, ARD capital studio

German industry is worried: climate neutrality by 2045 – how should Germany, a country of industry, export and innovation, achieve that?

The head of the Federal Association of German Industry (BDI), Siegfried Russwurm, fears that new climate protection goals and specifications will overwhelm the industry: “Just to raise the bar, although athletes and coaches don’t yet know how to cope with the lower ones – that is not a successful training strategy. And to do that as a trainer, and certainly not to talk to the athlete about it beforehand. ”

Merkel’s last day of industry

Chancellor Angela Merkel does not find it difficult to commit to Germany as an industrial location, but she warns that self-evident things have to be worked out over and over again.

It is her last appearance at an Industry Day and she uses it to make demands on the hosts on the way to climate neutrality: “We urgently need – we should work with the BDI – a forecast for electricity demand in 2030. The Assumptions that the electricity price will not increase are probably not sustainable. Then we need a plan that requires more line construction than we have planned today, “said Merkel.

SPD Chancellor candidate Olaf Scholz shares the Chancellor’s diagnosis and uses it to attack Federal Economics Minister Peter Altmaier. He assumes constant electricity consumption until 2030 – Scholz adds: “Let me say it loud and clear: the electricity lie.”

Scholz presents himself as a doer. He promises the industry that electricity will remain affordable for them. “That is why we will abolish the EEG surcharge by 2025 and reorganize the taxes and surcharges in the energy sector,” said Scholz. “My goal is an industrial electricity price of four cents.”

Laschet: no tax increases

Competitor Armin Laschet is not that specific. The Union chancellor candidate shows understanding for the concerns of the industry. “My idea is that in 20 years’ time we will still have a steel industry, still have a chemical industry, another automotive industry – then climate-neutral,” says Laschet. “But if you do not formulate this goal at the beginning, but just keep increasing guidelines and limit values, issuing bans, you will in the end gamble away the status of the industrialized country.”

The “Corona Method” with regulations down to the smallest detail does not fit the future. Laschet promises: less maneuvering and no tax increases.

There is no getting around climate neutrality, emphasized Annalena Baerbock. Image: dpa

Of course, Green Chancellor candidate Annalena Baerbock knows that this is her address too, but she emphasizes that there is no getting around the goal of climate neutrality: “Whether you like it or not – the competition is about who will be the markets of the future first achieved climate-neutral, in the future it will also have the edge in terms of economy and thus socio-political. ” The course must now be set for a social and climate-friendly market economy, said Baerbock. All three candidates for Chancellor appear a bit nervous at their show in front of the most important German business association. At the end of the day there is friendly applause for everyone, but no more at the German Industry Day

Besides, there were many other notable outbreaks such as the one at Hoc Mon mechanical workshop (51 cases), Ehome 3 apartment building (59 cases), Kim Minh Company (27 cases), Tan Phu District Hospital. (13 cases) Regarding the Hoc Mon mechanical workshop, an employee at the garment factory in Vinh Loc A industrial park (Binh Chanh district) was taken to concentrated isolation from June 9, and tested positive on June 15. Also located in Vinh Loc A industrial zone, on June 12, through a screening test at the hospital, a worker working at a food company was also positive. From here, the health sector took more than 100 test samples of F1 and screened for about 500 employees at the dormitory of this facility, and 350 people at the factory, and found 11 positive aggregate samples. Cu Chi field hospital, where COVID-19 patients are treated in Ho Chi Minh City. Photo: HOANG LAN On June 13, through screening, Xuyen A Hospital discovered a positive person in Tan Phu Trung industrial zone (Cu Chi district). Continue to screen close contacts, family members, recorded 4 positive cases and 6 positive pool samples. In addition, through community screening, testing more than 1,500 workers staying in Binh Tan district working for PouYuen company, there were 2 positive cases. Binh said that in the coming time, the medical force will continue to strengthen measures to control the COVID-19 epidemic in the area, strengthen tracing investigation, thoroughly zoning out the epidemic, and testing on a large scale. high-risk areas to look for sources of infection. The authorities will tighten the streamlining and screening of patients who come for examination and treatment, especially paying attention to checking epidemiological factors, carefully screening people coming from such as places where COVID-19 cases have been recorded. , who have suspicious symptoms.

The delegation inspected the actual site at the lunch table for workers at Ty Xuan Company Limited – Hoa Phu Industrial Park. The delegation inspected and supervised the establishment of the Steering Committee for COVID-19 prevention and control in industrial parks, the signing of commitments to fully implement epidemic prevention and control measures at the unit; the assignment and publicization of contact information of the focal point in charge of epidemic prevention and control; establish a (with) COVID Safety Team; develop plans for epidemic prevention and control at production and business establishments in industrial parks… According to Vice Chairman of Vinh Long Provincial People’s Committee Nguyen Thi Quyen Thanh, the fact check shows that companies and businesses have been proactive in implementing measures to prevent and control the COVID-19 epidemic such as: establish a Steering Committee for COVID-19 prevention and control; signed a commitment to fully implement epidemic prevention and control measures at the unit; develop plans for epidemic prevention and control at production and business establishments and arrange isolation areas in accordance with regulations. In addition, at enterprises, employees all strictly implement the 5K Message, businesses organize temperature checks twice a day for workers, force workers to wear masks, practice social distancing during mealtimes, usually during meal times. Regularly disinfecting at factories, transport vehicles, dormitories, canteens… Vice Chairman of the People’s Committee of Vinh Long province noted that businesses must not be subjective or negligent in implementing epidemic prevention measures. Units need to develop specific plans and scenarios, properly assess the level of disease risk at their units and use the right plans to handle timely and appropriately to both ensure the prevention and control of epidemics. , while ensuring production activities. Enterprises need to raise epidemic prevention and control measures to the highest level, fully equipped with equipment and human resources to carry out epidemic prevention and control work; strengthen the application of information in the organization. At the same time, businesses need to be active and proactive in performing periodic rapid test for COVD-19 to monitor and screen for risk cases; promote the role of the Steering Committee for epidemic prevention and control, the COVID-19 safety teams at the unit, strengthen the control of the source of goods, the schedule of experts and workers inside and outside the province working at the unit. position to promptly detect cases with epidemiological factors, coordinate with the health sector to handle promptly to limit pathogens from entering the business.

This company has now been locked down and sampled all 350 employees at the garment factory. Also located in Vinh Loc A Industrial Park, on June 12, through screening, Quoc Anh General Hospital discovered a positive case for nCoV. This person is a worker at Van Duc Food Company. The health sector has traced and sampled more than 100 F1. 500 workers at the facility’s dormitories have been tested. Through the screening of these two companies, the health sector discovered 11 positive aggregate samples. The health sector is conducting large-scale screening samples in industrial zones. Photo: Chi Hung. In addition, on June 13, through screening, Xuyen A Hospital discovered a positive case of a worker in Tan Phu Trung Industrial Park. The health sector detected 4 more positive cases and 6 positive pool samples. Binh said another infection chain was detected through community screening in a residential area of ​​An Lac ward, Binh Tan district. Through testing more than 1,500 workers staying in Binh Tan district, working at PouYuen Company, two positive cases were found. This afternoon, the health sector tested about 1,000 workers and the Department of Health is expanding rapid antigen testing in this area. Binh informed that on the afternoon of June 15, the Department of Health coordinated with Binh Tan and Binh Chanh districts to test more than 25,000 officials and workers in Vinh Loc Industrial Park. According to the announcement of the Ministry of Health, from April 27 to now, Ho Chi Minh City has 894 Covid-19 patients. In particular, the largest outbreak related to the Renaissance missionary group was basically under control. However, the epidemic was complicated when there were many clusters of cases with unknown sources of transmission. In particular, the epidemic has penetrated the Hospital for Tropical Diseases in Ho Chi Minh City. The first case was detected on June 12 in the information technology department. Only 4 days after being discovered, this outbreak had 69 people including medical staff and related people. On June 14, Chairman of Ho Chi Minh City People’s Committee Nguyen Thanh Phong made a decision to ease social distancing in Go Vap district and Thanh Loc ward (district 12), reducing from applying Directive 16 to Directive 15. The city remains separated under Directive 15 for 2 weeks. Unloading checkpoints in Go Vap At 0:00 on June 15, all quarantine checkpoints at the gateway of Go Vap district were lifted according to the decision to reduce the distance level of Ho Chi Minh City.

Illustration GS. Dr. Truong Viet Dung, Chairman of the National Ethics Council in Biomedical Research, said in the SK & DS newspaper, in phase 3, the subjects of the Nano Covax vaccine trial in Vietnam will expand. The object here means the area, which can be extended to other areas such as workers in industrial zones. However, areas or industrial zones with COVID-19 cases were not selected for clinical trials because it would be interpreted as the epidemic situation that made people too worried and accepted to participate in the research. Therefore, research can only be carried out in industrial zones at risk of disease outbreaks, not in industrial zones with epidemics. Testing participants for COVID-19 to confirm the absence of antibodies is required. In the spirit of “testing as quickly as possible” of the Government, the Ministry of Health assigned testing units. Fast does not mean cutting, skipping stages. Any stage must comply with international requirements and standards. Do it very quickly but must be very standard, giving it to the Council must be approved immediately. In general, in accordance with the process and step by step of each phase, so that the Ministry of Health has enough scientific basis to be able to grant urgent and conditional use of Nano Covax vaccine in Vietnam. Information on Vietnam plus, Deputy Director of Military Medical Research Institute Ho Anh Son said that according to the latest information, it is possible that as soon as next week (expected in early June 2021) will enter vaccine research. Nano Covax phase 3 with the expected number of volunteers to participate is about 13,000 people. In phase 3, the implementation is very fast, following the correct process, and at the same time meeting the needs of disease control in Vietnam. Up to now, the Military Medical Academy has mobilized a lot of doctors, technicians, students… to participate in the testing process so that it can be ready for deployment in 10 provinces/cities across the country at the same time. country. After testing phase 1 and phase 2, Nano Covax vaccine is quite safe, so the criteria for recruiting volunteers will be relaxed more than the previous 2 phases. Volunteers participating in phase 3 from 18-75 years old, only need to check the blood count and check for antibodies to the SARS-CoV-2 virus. People who have been exposed to the SARS-CoV-2 virus or already have antibodies will be excluded from the test population. More about the phase 3 trial, Lieutenant General, Professor-Dr. Do Quyet, Director of the Military Medical Academy, Ministry of National Defense said that he believes in the safety of the Nano Covax vaccine with the results achieved. through the previous two phases of testing. According to the Director of the Military Medical Academy, immunogenicity is reflected in two main factors: antibody concentration and antibody immunogenicity. Specifically, the concentration of SARS-CoV-2 virus antibodies after injection of the phase 2 trial showed a very high increase in antibody titres, from tens to hundreds of times. Antibody immunogenicity to assess the ability to neutralize SARS-CoV-2 virus living at the 35th day of good response, above the prescribed threshold. As for the ability to neutralize the virus at day 42, the team has now evaluated 22/110 samples; expected to be completed in early June 2021 to report to the National Ethics Council in Biomedical Research. Phase 3 aims to evaluate the protective effect of the vaccine on the community, designed in many centers, expanding to other localities with a larger number of samples with only 1 injection. Based on the results of the evaluation, the National Ethical Council in Biomedical Research selected the experimental injection of 25mcg dose. Strictly following international guidelines, the National Ethical Council for Biomedical Research also identified a phase 3 trial in 10,000 people. Military Medical Academy complies with the approved outline and deploys to recruit volunteers.

Before embarking on the task, all technical staff are equipped with protective gear, disinfecting to avoid the risk of disease transmission. Under the hot summer sun, 7 officers, employees and technicians of Viettel Bac Giang in tight protective suits still urgently started to deploy the items to be completed in time. Mr. Nguyen Duc Ngoc – infrastructure construction worker of Viettel Bac Giang confided that it was hot outside, but the temperature in the engine room was up to 50 degrees Celsius. “The sweat came out like a shower, it was very uncomfortable, but the brothers still encouraged each other to try to complete it to serve the management and prevention of the Covid-19 epidemic. Everyone hopes to contribute to repelling the Covid-19 epidemic so that life, activities and production can return to normal”, Mr. Ngoc shared. The completion of this system not only ensures the quality of 2/3/4G mobile coverage to serve the communication needs of people and workers in the isolation area, but also contributes to ensuring room management, anti-transparent translation of organ blocks. Some pictures during the process of staff and technicians of Viettel Bac Giang constructing the mobile vehicle broadcasting item serving the Luxshare ICT concentrated isolation area – Van Trung Industrial Park, Viet Yen district on May 27: The technicians worked continuously for many hours in tight protective suits under the intense heat. Meanwhile, the temperature in the engine room reached about 50 degrees Celsius. Despite the hard work, the technicians still encouraged each other to work hard to finish the project as planned. Mr. Nguyen Duc Ngoc confided: ”As a child of Viet Yen district, Bac Giang, I want to promote the work progress as quickly as possible, thereby contributing effectively to the prevention and control of Covid-19 epidemic. -19 of the local”. Once completed, the mobile broadcasting vehicle will contribute to ensuring smooth communication in the isolation area as well as serving the management of epidemic prevention and control. In addition to mobile broadcasting vehicles, Viettel Bac Giang is also assigned to install surveillance camera systems in all concentrated isolation areas in the province. From May 20 to the morning of May 24, units have installed 1,000 cameras at 100 isolation points. In order to quickly and effectively install surveillance cameras in isolation areas, Viettel Bac Giang has established 30 groups (4 – 5 people/group) to work continuously during the day. Quick dinner of the technician team. The surveillance cameras, after being put into use, will operate continuously, connected to a centralized monitoring system to manage citizens to effectively and properly isolate themselves according to regulations.

Journalists of Science and Technology Journalists’ Club visited Viettel High Tech Industry Corporation. Lt. Col. Nguyen Cuong Hoang, Deputy General Director of Viettel High-Tech Industry Corporation, said that VHT operates in three main areas: military technology, telecommunications technology and civil equipment. As the main unit of Viettel in the field of research and development, up to now, VHT has had 276 industrial property registration applications, of which in 2020, 48 core technologies have been completed. product, registered and accepted 66 patent application. The VHT has been granted four new international patents by the US Patent and Trademark Administration (USPTO). In addition, VHT is also granted 19 domestic patents, 5 utility solutions and 7 exclusive design rights, 25 articles are published and presented in prestigious domestic scientific journals and conferences and international. Protection of intellectual property by registering national and international patents is an important basis for VHT to own core technology, ready to integrate into the world, fully competitive. with international corporations, affirming Viettel’s leading position in research and development of “Make in Vietnam” products. In addition, VHT always goes hand in hand with the Government in promoting and developing intellectual property mechanisms. Mr. Phan Thanh Hai, Director of the Appraisal Center, Department of Intellectual Property – Ministry of Science and Technology, said that in the last 5 years, the number of patent applications of Viettel has grown continuously. The fact that Viettel has 4 US patents is of great significance in asserting the technological capacity and the development orientation of market expansion of Vietnamese enterprises.

In the digital transformation of global industries, the Internet of Things, as one of the important frontier high-tech fields, is an indispensable part of it. Especially when the application of the Internet of Things technology becomes more and more popular, the future development of different industries is closely related to the Internet of Things.

As a rare exhibition platform for the entire industry chain in the Internet of Things industry, IOTE 2021 International Internet of Things Exhibition·Shanghai not only unveiled the latest Internet of Things technology products and solutions in 2021, but also brought 9 major industry summits in different fields. The big names gathered together to discuss the future development of the Internet of Things industry and its value for the transformation and upgrading of other industries.

Hundreds of well-known companies gathered in one hall, and Four-Phase Technology was pleased to raise double awards

On April 20th, the 2021 China Internet of Things CEO Conference and “IoT Star” awards ceremony with the theme of “Digital Evolution and Intelligent Upgrade” was grandly held at the Shanghai Sheraton Youyou Hotel, opening the IOTE 2021 International Internet of Things Exhibition· The curtain of Shanghai Railway Station.

The “Star of the Internet of Things” selection event, which started in 2008, has the reputation of the Oscar in the Internet of Things industry and is an extremely influential industry event for the entire industry chain in the industry. At this awards ceremony, award-winning companies from all over the country gathered together for the grand event! As a leader in the field of location Internet of Things, Sixiang Technology stood out from hundreds of participating companies and won the 2020 “Most Influential Internet of Things Positioning Enterprise” and “Best Intelligent Industrial Application Solution” two awards.

“Star of Things” trophy and certificate won by Sixiang

“Digital Manufacturing Intelligent Transformation”

On April 22, the organizer held the IOTE·2021 Shanghai International Industrial Internet of Things Application Summit Forum with the theme of “Digital Manufacturing Intelligent Transformation”, and invited industry representatives including Sixiang Technology to participate in the discussion and share the industrial Internet of Things. Hot technologies and application cases in the field, while discussing the difficulties and countermeasures in the process of industrial IoT application deployment from multiple dimensions.

According to various data released by the Ministry of Industry and Information Technology in 2020, my country is an industrial country with the most complete industrial chain in the world, and the Industrial Internet of Things therefore has a huge market audience. However, in the face of the immense industrial Internet of Things wave, most companies still have doubts. On the one hand, they were inspired by the industry’s leading benchmark cases and planned to enter the game. On the other hand, they ran aground their plans due to factors such as insufficient willingness, weak foundation, insufficient funds, and unclear paths. Therefore, this summit aims to “combine the real pain points of industrial enterprises at this stage and vigorously promote the application of industrial Internet of Things in the industry”.

As the proponent and advocate of the concept of “Location Internet of Things”, Sixiang Technology was invited to participate in this summit. Vice President Wu Qian delivered a keynote speech on “Industrial Location Internet of Things, Helping’Smart Manufacturing’ to Reduce Costs and Increase Efficiency”, and A series of four-phase application cases in the field of intelligent manufacturing were shown to the guests.

Below, is the wonderful content sharing of this speech.

1. Overview of Location Internet of Things

   

   The so-called “location of Internet of Things” simply means “in the existing Internet of Things ecosystem, the acquisition and use of location information has been added.” Taking life scenarios as an example, “using the location information of people and cars to achieve scientific scheduling and management of online car-hailing” is the application of location-based Internet of Things technology.

   

   At this stage, the technology of location Internet of Things application mainly includes indoor positioning and outdoor positioning. Among them, after 20 to 30 years of development, outdoor positioning technology can achieve meter-level accuracy at this stage, while indoor positioning technology uses various wireless communication technologies to achieve decimeter-level positioning accuracy.

2. Application of Location Internet of Things

   

   At present, most manufacturing enterprises in my country are labor-intensive and suffer from low efficiency and high cost. An important entry point for enterprises to realize the transformation of intelligent manufacturing is to solve the problem of inefficient human, material and goods circulation. The use of positioning technology to obtain the real-time location of operators, tools, and goods, and to directly associate location data with business processes, to solve multiple problems faced by manufacturing companies from a technical perspective is that the location of Internet of Things helps manufacturing companies achieve intelligence. An important way to upgrade manufacturing and reduce costs and increase efficiency.

   

   Wu Qian said, “The Internet of Everything is an unstoppable development trend. The Internet of Things is a comprehensive technical product integrating new technologies such as big data, cloud computing, Internet of Things, 5G, and artificial intelligence. The biggest difficulty is not business logic and The discovery and invention of technology lies in the landing scene and application space of the technology. In the complex industrial production environment, the traditional low-precision positioning technology is not competent. The centimeter-level ultra-high-precision positioning technology owned by Sixiang Technology can reach an accuracy of 10cm. Not only can it easily adapt to more than 99% of the industrial production environment, but also has strong anti-interference ability.”

   

   Facing manufacturing customers with transformation needs, Sixiang uses a self-developed 3D editor to standardize 70% of commonly used models in industrial scenes, reduce modeling costs by more than 50%, and successfully realize the visualization of production scenes in the virtual digital space. At the same time, the algorithm engine abstracts the basic functions that solve the pain points of the manufacturing industry, forming standard algorithm modules such as automatic order dispatch, situation research and judgment, event warning, and personnel tool efficiency analysis, which successfully increased the efficiency of custom development by 90%. Combine these algorithm modules with the business process of the factory to realize the automation of scheduling, analysis, and decision-making, and create a customized location IoT platform for different industries.

   Using this program, Sixiang has successfully created a series of benchmark cases in the automobile manufacturing, textile printing and dyeing industry, electronic manufacturing industry and other industries, and has won unanimous praise from customers.

   

   Centimeter-level high-precision positioning helps multi-industry intelligent upgrade

   Of course, four-phase technology location IoT solutions are not limited to applications in the manufacturing sector. Relying on the self-developed UWB and Bluetooth multi-mode fusion high-precision positioning system, Four-Phase has expanded its application to three major sectors: industrial security, public security, judicial, and smart cities, helping different industries achieve digital and intelligent upgrades.

   At the same time, through the customer service strategy of “multi-location, multiple centers radiating to the periphery”, Sixiang successfully landed in the four major industrial clusters in the country from Chengdu to Chongqing to the Yangtze River Delta, and then to the Guangdong-Hong Kong Bay and West Coast Economic Zones.

   Up to now, Sixiang has developed more than 30 ecological partners, cooperated with more than 1,000 customers, and delivered and completed 1500+ typical cases of industry applications.

   Industrial Security: Use the location to improve the security system in high-risk scenarios

   

   A case of a large-scale power plant 3D visualization platform of Smart Power

   *This project won the 2020 “Best Intelligent Industrial Application Solution” award from the Internet of Things Star

   Taking smart power as an example, Four-phase is designed with positioning technology as the core, and uses network systems and three-dimensional systems to comprehensively implement visual management, personnel positioning, vehicle positioning, hidden danger investigation, inspection management, and danger monitoring in industrial production. Integration and integration, to achieve cross-system data communication and linkage response, to achieve convenient management, intuitive data, system security, etc., and help heavy and high-risk industrial enterprises to improve the production control system.

   Department of Public Security, Public Prosecution and Law: Use location to boost the development of intelligent politics and law

   

   Application case of a case handling center of smart law enforcement

   Taking the case handling center as an example, Four Phases adopts industry-leading indoor positioning technology, audio and video processing technology, and efficient and reliable application system architecture to achieve unified management of the entire process of law enforcement case handling areas, unified video scheduling, and integrated business management applications (in-area registration, Personal safety inspections, temporary storage of belongings, information collection, inquiry management, and registration of items involved), comprehensively improve the standard management level of the case-handling area, fully realize efficient, standardized and standardized smart law enforcement, and increase the credibility of law enforcement.

   Smart City: Use location to empower advanced forms of urban informatization

   

   Smart Elderly Care Case-Macau Neighbourhood Association Yijun Center Project Case

   *The bracelet shown in the picture is produced by EHIGH, a positioning brand under Four Phase

   Taking smart elderly care as an example, Sixiang assists nursing homes to obtain real-time location information of the elderly based on high-precision positioning technology. In the case of limited medical staff, wearable smart positioning terminals are used to achieve all-round, all-weather safety and health management for the elderly, effectively reducing the pressure on medical care, helping the social pension system to be more complete, and alleviating the pressure on the elderly caused by the intensified aging of the population.

   In the future, in the face of the next innovation of the Internet of Things, Sixiang Technology will focus on the industry in the application scenarios for deep cultivation, so that location information can be further integrated with the business and bring value while solving user pain points. Faced with the ever-increasing waves of industry changes, Sixiang will also take a more proactive attitude to dig deeper into the pain points of the industry, continuously improve the existing technical solutions according to the needs of industry transformation, and use location information to empower industry upgrades!

Specifically, with the above violation, Becamex was fined for false declaration of nearly 8.5 billion VND, the late payment of value added tax was more than 2.9 billion VND, the late payment interest of corporate income tax. industry is more than 1.4 billion. Becamex Industrial Development and Investment Corporation was fined and had to pay 57 billion VND. According to the decision of the Tax Department of Binh Duong province, Becamex corporate income tax to be temporarily paid in 2020 is 1.87 billion VND, temporarily not sanctioned for false declaration and late payment interest due to the deadline for the inspection conclusion. time of submission of corporate income tax finalization declarations. Thus, the total amount of fines and tax arrears that Becamex has to pay into the state budget is more than 57 billion VND. In particular, Becamex has fully paid the arrears of corporate income tax and value added tax of 2019 and 2020 into the state budget on February 25. Regarding the business situation, accumulated in 2020, BCM’s net revenue reached 7,723 billion VND, a decrease of 6% compared to the previous year, profit after tax reached 2,149 billion VND, a decrease of 18% compared to 2019. In 2020, Becamex planned Total revenue target is 6,016 billion VND, EAT is 931 billion VND, 40% and 65% lower, respectively compared to 2019. Accordingly, although the business result is lower than 2019, BCM still has completed. successfully exceeded 28% of its revenue target and reached 131% of its profit after tax target. As of 31/12/2020, BCM’s total assets increased by 10.7% compared to the beginning of the year to 48,190.8 billion dong. In which, main assets are inventories reached 24,165.6 billion VND, accounting for 50.1% of total assets; long-term financial investment reached 11,893.5 billion VND, accounting for 24.7% of total assets; Short-term receivables reached 3,655.4 billion VND, accounting for 7.6% of total assets. In the fiscal year, total short-term and long-term loans increased by 2.4% compared to the beginning of the year, corresponding to an increase of VND352.6 billion to 14,900.3 billion and accounting for 30.9% of total capital of BCM. . Thu Ha (Th)

Each year, the electricity industry invests nearly 1,000 billion VND to invest, renovate and upgrade the power grid for the city. Danang Continuously invest in and upgrade the power grid to supply electricity stably and continuously for businesses According to Director of Electricity of Da Nang – Mr. Le Hong Cuong, in recent years, the PC of Da Nang annually invests 400 billion VND to invest, renovate and upgrade the power grid to ensure power supply for the city. Including the investment of Central Power Corporation (CPC) and Power Transmission Company 2, the total investment each year is about 1,000 billion VND. City grid. Da Nang has many good functions as a smart grid. Da Nang PC is also the first unit in the country that will basically complete the automation of the grid, the substation without any personnel on duty …. In particular, Da Nang PC is always interested in ensuring to improve the quality of electricity for industrial parks (IZs) and High-Tech (CNC) zones. Currently, in Da Nang there are main industrial zones, stable electricity supply from 110kV substations in the area including: An Don Industrial Park (power supply via An Don 110kV substation), Lien Chieu Industrial Park (Lien Chieu Station), Industrial Park Hoa Khanh (Hoa Khanh 1 Station, Hoa Khanh 2), Hoa Cam Industrial Park (Cau Do Station), High-Tech Park and Information Technology Park (Hoa Lien Station). Notably, the high-tech park and the IT zone have great potential for expansion, attracting many domestic and foreign enterprises to invest in production. In recent years, the Company has invested in building a power grid according to N-1 criteria to improve the reliability of power supply for this area. In the year 2021, the Company continues to invest in implementing key projects: Installation of 2 more substations 110kV Hoa Lien (40MVA); Exploit 22kV transmission line from Hoa Khanh 2 substation to high-tech park and other projects to improve reliability of power supply. After completion, projects will ensure safe and continuous power supply for businesses and the ability to expand the scale of the High-Tech Park in the coming time. Along with that, Da Nang PC is also implementing many power grid projects in parallel with the construction progress of a number of key projects in Da Nang to be ready for power to serve when the project is completed and put into operation as Construction works of 22kV lines along Bach Dang-Nhu Nguyet street with the scale of 3.5km underground cable, 10 RMU cabinets, serving power supply of Software Park No.2 (ICT Building Block 01 will complete the power supply in October 2021 and by August 2022, completing the whole project); 22kV Exploitation Project after 110kV Khue Trung substation with expected scale of 3.7Km underground cable, 05 RMU cabinets for power supply in Hoa Xuan urban area and Hoa Xuan creative space. The completed works will contribute to the city’s development goals, especially the development of information technology, electronics and telecommunications industries in the industrial era 4.0. Manufacturing in high-tech industries requires very high reliability of power supply High-tech industries require very high power supply reliability Mr. Pham Truong Son – Head of Management Board of Da Nang Hi-Tech and Industrial Zones, said that in 2017 and 2018, the Management Board regularly received recommendations from businesses related to power outages and power supply. Stable in production. Da Nang Department of Industry and Trade is assigned by the City People’s Committee for state management in electricity development; Based on receiving feedback from businesses, the Management Board and the Department of Industry and Trade of the city, Da Nang PC has closely coordinated to resolve difficulties and problems for businesses related to electrical connection as well as other problems in the power supply such as troubleshooting for the business; installation of electronic relays…. Thanks to that, in the past 2 years, the supply of electricity to serve the production of enterprises in industrial parks and hi-tech zones has been very good. Compared with the common ground there is more progress, the power quality is relatively. However, according to Mr. Son, in the coming time, CNC production and supporting industries require very high power quality and greater stability of electricity. Therefore, it is necessary to have measures and solutions to support investors and manufacturers to ensure the quality of electricity supply. “Power outages and power outages in the past have been greatly strengthened. However, in the coming time, with industrial development, the power source is a very important issue. Especially in the high-tech zone, production needs very high and stable power quality, requiring Da Nang PC to provide reliable power ”, Mr. Son said, at the same time proposing that Da Nang PC will have criteria in the near future. and an underground roadmap for the power transmission system to serve the industrial parks and the city’s high-tech zones to ensure aesthetics, aesthetics, and facilitate maintenance. Commenting on this issue, Secretary of the Da Nang City Party Committee – Mr. Nguyen Van Quang said that one of the contents that investors are always interested in when investing in high-tech zones is the ability to meet the quality. electricity of the city. “Calling for investment in the city is not only favorable land conditions, but electricity quality is a very important factor. Therefore, the Industry and Trade industry is concerned with Da Nang PC and CPC to ensure a stable, constant and quality power supply for production ”, Mr. Quang emphasized.

To develop space technology, first of all, it is necessary to master the technology of satellite design and manufacture. In the photo: Vietnamese engineers participating in the fabrication of MicroDragon satellite in Japan. Step by step mastering technology Recently, the Vietnam Space Center (VNSC) said that the NanoDragon satellite researched, designed and manufactured by Vietnamese engineers has passed the last “test”, becoming one of 15 satellites. selected by the Japan Aerospace Research Agency (JAXA) to be launched into orbit by the Epsilon missile, as scheduled for Japan’s fiscal year 2021. One of the applications of this satellite by Dr. Le Xuan Huy, Head of the NanoDragon satellite research team, for example, is that it is difficult for ships operating far offshore to obtain positioning signals. If there are satellites in operation, we can receive positioning signals, helping the authorities to monitor the cruise of the ship. In general, Associate Professor, Dr. Pham Anh Tuan, General Director of VNSC said that space technology is a high-tech industry integrated from many different science and technology disciplines to manufacture and adapt. using means such as satellites, spacecraft, boosters, earth stations … to explore, conquer and use space, for the benefit of humans. The race to rise to the sky is where countries show their technological strength and national potential. Therefore, the development of space technology, first of all, the mastery of satellite design and manufacturing technology is very important. “Each country has a different approach to space technology, be it focusing on buying satellite data images of another country, or gradually mastering space technology. Vietnam approaches the second direction. Although this is a direction that requires time, investment and many challenges “, Associate Professor, Dr. Pham Anh Tuan emphasized. Regarding this issue, Associate Professor, Dr. Dao Ngoc Chien, Deputy Director of the Department of High Technology (Ministry of Science and Technology) said that, in the coming time, space technology research activities will step into a new stage with a new approach, which is the development of Vietnam’s space industry. An important premise for the space industry “Strategy for the development and application of space science and technology to 2030” signed by the Prime Minister on February 4, 2021 (in Decision No. 169 / QD-TTg) with the main goal of promoting to push the wide application of new achievements of space science and technology to serve the development of all aspects of socio-economic life, contribute to ensuring independence, sovereignty, territorial unity, territorial integrity and relevant national interests. The strategy sets out many tasks and solutions for the development and application of space science and technology to 2030, including: Improving the national institutions and legal framework; scientific research and technology development; investment in construction of technical infrastructure; human resource development; market development; international cooperation and awareness raising on space science and technology. In particular, the investment in the construction of technical infrastructure is an essential and fundamental task for the development of space science and technology. The strategy also sets out a goal that by 2030 will master the technology of designing, manufacturing, integrating optical sensors, radar for earth observation satellites; assembling, integrating, and inspecting the high-resolution, super-high satellite in the country; to master the technology of designing and manufacturing terminals, ground stations for controlling and receiving satellite data, and transponders for telecommunications satellites; to form Vietnam’s navigational capabilities, and reduce dependence on existing global satellite navigation systems. According to Associate Professor, Dr. Dao Ngoc Chien, to develop space science and technology potentials, in the coming time, Vietnam must train a team of about 300 experts and 3,000 engineers in the field of science. and space technology; invest in upgrading about 10 specialized laboratories. At the same time, there should be a mechanism to encourage the formation of strong research groups on space science, space technology, application of space science and technology … And Dr. Bui Trong Tuyen, Director of the Institute of Space Technology (Vietnam Academy of Science and Technology) said that although Vietnam has begun to have research groups to manufacture satellites, the capital is still It is limited, so it has not been focused on investment. In the coming period, it is hoped that investment in space technology will be more concentrated, along with diversifying resources, will build large research centers specializing in space technology. It is an essential requirement to pave the way for the next stage of forming the space industry.

Period 2021 – 2030, TP. Da Nang plans to mobilize VND 675 billion to implement projects and projects to reduce greenhouse gas emissions in industry and trade; cleaner production support ….

By 2025, to complete the model of eco-industrial park; 100% of public transport by bus meets Euro 4 emission standards; reduce from 1 to 2% of greenhouse gas emissions from electric energy, new and renewable energy development solutions; 85% of urban domestic wastewater is treated up to standards; The rate of solid waste collected and treated to reach the standard reaches over 95%;….

By 2030, Da Nang will have 2-3 ecological industrial zones, at least 5 ecological urban areas; 25% of public buses are powered by electric motors; the rate of GHG emission reduction reaches 5-7%; 95% of urban domestic wastewater is treated up to standards; 97% of solid waste is collected and treated to meet standards, the environmental hot spots are renovated, and there is no serious environmental pollution; 100% of households will perform waste separation at source; 100% of feedbacks and recommendations on environmental pollution have been resolved.

Da Nang Industry and Trade plays a major role in implementing goals, projects and projects related to reducing greenhouse gas emissions in industry and commerce; promoting cleaner production, saving energy in industry and developing clean energy and renewable energy in the city.

In order to fulfill the set objectives and targets, in the period of 2021-2030, the Department of Industry and Trade of Da Nang regularly conducts research and development of programs and projects for new energy and renewable energy. creation of the city; supporting key energy using basic models to build a management model according to ISO 50001: 2018; implementing cleaner industrial production solutions; deploy support for enterprises to convert and replace outdated and energy-consuming equipment with energy-saving equipment, replicate the results; make plans for the implementation of the roadmap to relocate production establishments in craft villages to industrial clusters with satisfactory technical infrastructure for environmental protection (Tuy Loan rice paper craft village, Non-handicraft village Water, Cam Ne screening village …). Total funding for these activities is estimated at about 675 billion VND; in which, the budget support is 25 billion dong, the socialized capital is 650 billion dong.

Da Nang is the first locality in the country to build a pilot model for applying cleaner industrial production to manufacturing enterprises.

In the 2016-2020 period, contributing to the goal of “Da Nang – an environmental city”, the Da Nang Industry and Trade sector has effectively implemented industrial promotion projects with funding from the national industrial promotion program and local industrial promotion.

In which, TP. Da Nang has received VND 5.25 billion from the national industrial promotion program to implement 17 industrial promotion projects. In which, mainly supporting to build 5 technical demonstration models with a total industrial promotion cost of 1.85 billion VND, capital mobilization from enterprises and production facilities is more than 32.78 billion VND; implemented 9 projects on application of advanced machinery and equipment in industrial production, technology transfer and application of advanced machines, scientific and technical advances in industrial production – handicraft with total experience. the national industrial promotion fee is 2.5 billion VND, the capital contribution of the enterprise is nearly 10 billion VND; successfully built a pilot model of applying cleaner industrial production for 01 unit with a support budget of 500 million VND, the reciprocal investment of the enterprise was over 1.3 billion VND.

In addition to the national source of industrial promotion, City People’s Committee. Da Nang has also spent 5.78 billion VND implementing 72 local industrial promotion projects to implement many consulting projects on assessment of cleaner industrial production; support consultancy to evaluate cleaner production for many units, help businesses improve efficiency, save input materials and fuels in the production process.

The support from the national and local industrial promotion program not only helps Da Nang enterprises boldly apply technology in production, increase labor productivity and product quality, and mobilize capital from business. industrial development, but also makes an important contribution to reducing greenhouse gas emissions due to industrial production, realizing the goal of “Da Nang – an environmental city”.

Illustration

According to TS. Phan Huu Thang, Vice Chairman of Vietnam Real Estate Association, industrial real estate is a bright spot in the coming time. The number of 326 industrial parks, thousands of hectares of industrial land in our country has been attracting great attention to foreign businesses.

“In the coming time, real estate investors may pay attention to this market”, Mr. Phan Huu Thang emphasized.

Actual developments in the market and a survey by the Vietnam Real Estate Brokerage Association show that the current average occupancy rate in industrial zones is over 70%; Average factory rent across the country ranges from 60,000 to 80,000 VND / m2 and the price of land in industrial zones with infrastructure ranges from 3-5 million VND / m2 and may continue to increase in the near future.

In the first quarter of 2021, the industrial real estate market was very active in a number of localities with great potentials and strengths in industrial development, including Long An, Dong Nai, Binh Duong, Binh Dinh, Thanh Hoa, Quang Ninh, Hai Duong, Bac Giang …

Along with that, most of the provinces and cities capable of industrial development are very interested in proposing the development of new industrial zones, and at the same time have specific mechanisms and policies to attract investors, especially foreign enterprises investing in these industrial zones.

In the context that Vietnam successfully prevented the COVID-19 epidemic and positive results in economic development, experts in the real estate sector forecast that in 2021, the shift of production and installation of orders. goods from outside areas continue to shift to Vietnam will be a ‘push’ to increase the demand for industrial real estate in the country.

Accordingly, many new industrial zones will continue to participate in the Vietnamese industrial real estate market and there will be many new projects to develop infrastructure of industrial parks approved. Many logistics projects serving industrial zones will also be promoted.

However, real estate experts also warn localities to carefully calculate in the new industrial park project, to avoid falling into the risk of redundant crisis as happened to some localities. Phuong.

A new “idea” of planting fruit trees such as mango, jackfruit … in the premises of the factory and the roads is gradually becoming a reality when the seeds have been nurtured. Mr. Nguyen Khac Thanh, General Director of Tin Nghia Industrial Park Joint Stock Company – Phuong Dong – investor of Dat Do 1 Industrial Park, said that the company has invested more than 36 billion VND for a green area of ​​62.48 ha, accounting for 13 % of the whole area is to create a green area for the industrial park, building an eco-friendly industrial park. Currently, the occupancy rate in Dat Do 1 Industrial Park has reached over 60%. Dat Do 1 Industrial Park is continuing to improve its infrastructure to attract secondary investors, striving to increase the occupancy rate to 100% by 2022. In particular, in the development process, Dat Do 1 Industrial Park continues to build a green, environmentally friendly industrial park in harmony with the rural safety network.

Facing the current trend of industrialization 4.0, building green industrial zones is indispensable, especially in the locality where there are 15 industrial zones such as BR-VT. Many industrial zones such as Phu My 3, Da Bac, Sonadezi … also pay attention to and prioritize the use of high technology and ensure green, clean and environmental protection factors. Because, enterprises are aware that an important part of the goal of creating a green industrial park is not only an environment-friendly landscape with lots of green trees, but also eliminates the dryness, noise, and heat. factories and emissions to the outside. From there, minimizing the greenhouse effect and contributing to the fight against climate change. The construction of infrastructure of green industrial zones is the basis to attract green FDI inflows, to select industrial production projects applying advanced technology, without harming the environment. Green IP development is also the optimal direction to create industrial urban areas, meeting the living and working needs of experts and workers.

In the context that industrial production has long had a serious impact on the ecological environment, a measure of the capacity, prestige and brand name of enterprises, the current infrastructure investor is not merely in productivity, product quality, but also how they respond to the environment. In particular, the Green Industrial Park has important implications for the sustainable industrial development – one of the four economic pillars of BR-VT. Greening production, reducing pollution and moving towards sustainable development are the prerequisites to enhance the competitiveness of BR-VT in the current context.

According to research published in Nature, fishing operations emit about 1 billion tons of CO2 emissions per year – higher than those emitted by aviation (before the COVID pandemic – 19 ).

Industrial fishing, in particular the method of pulling nets along the seabed, not only contributes to climate change becoming more serious, but also greatly damages biodiversity. positive.

“This activity is the equivalent of plowing an old forest, repeating until there is nothing left,” report author Enric Sala, a marine biologist, points out.

Industrial fishing is also one of the least expensive fishing methods. Researcher Sala also said that most of the hunting grounds have been repeatedly caught, leaving little value left to catch.

Mr. Eric Sala is looking at possible dynamics that could cause the fishing industry and governments to abandon netting methods and hope the findings on the carbon footprint could be just a wake-up call.

The study of Mr. Sala et al. Breaks down the entire ocean into 50 square km units, measuring the extent to which each unit contributes to global marine biodiversity, fish stocks and climate protection, based on a complex analysis of the location, water temperature, salinity and distribution of species, among other factors.

At the same time, this study also monitors the amount of CO2 emissions each unit is capable of absorbing.

By mapping baselines for each previously divided unit, research can calculate the effects of an increase or decrease in fishing and other human activities.

The overall goal is to develop a map of ocean locations that, if protected, would be of maximum benefit to humans in increasing fish stocks, biodiversity and carbon sequestration while minimizing losses. income harm to the fishing industry.

Dismissing the long-held view that protecting oceans harm fisheries, research shows that marine protected areas designed to prevent overfishing will actually boost marine life. by acting as fish nurseries.

According to the study results, ocean protection could increase global fisheries production by more than 8 million tons per year, despite the challenges of overfishing and climate change.

“However, the fishing will have to stop,” said Mr Sala. While mangroves, kelp forests and sea grasslands have good carbon sequestration capacity, below the ocean floor is a large carbon sink.

Once fishermen’s nets are released into the ocean, the carbon gas is released back into the water. Excess carbon in the water turns it into acid, which is harmful to marine organisms.

Worse yet, this situation also affects the ocean’s ability to absorb carbon in the atmosphere: if seawater is saturated, it will not be able to absorb man-made emissions, limiting one of the The best “weapon” of man in the fight against climate change.

By combining publicly available data on the operations of fishing vessels globally with unit estimates of the amount of carbon stored in ocean sediment layers, researcher Sala and his team had The amount of emissions generated by this method can be calculated at the national level.

For example, the European Union emits 274,718,086 tons of carbon into the oceans each year, while Chinese fleets emit 769,294,185 tons and the US emits 19,373,438 tons.

Technological innovations such as green energy production and battery storage are critical to reducing global greenhouse gas emissions. But there is a need to reduce the amount of carbon in the atmosphere, and so far the technology has not been able to do it at a reasonable cost and scale.

Mr. Sala said the oceans have been absorbing carbon for thousands of years. “Most people still see oceans as victims of climate change. What people don’t realize is that nature is part of the solution to the climate crisis. ”

Sapphire

According to Time

With the effective control of the domestic epidemic and the rapid recovery of the domestic manufacturing market, smart manufacturing has become one of the most watched tracks. Some smart manufacturing companies have been investigated by a large number of investment institutions and have gained the favor of capital.

For example, a research report released by Hillhouse Capital last year stated that Hillhouse will continue to expand its investment footprint in subdivided fields such as information automation, industrial Internet, and intelligent robots, and at the same time use the power of capital to connect the new economy and traditional industries to realize society Sustainable economic development.

Harbin Industrial Intelligence (000584), as a leading domestic enterprise engaged in intelligent manufacturing business, has a full industrial chain layout around industrial robots, has core technology and production capacity, or will benefit from the benefits of policies that encourage the development of intelligent manufacturing.

Main business focuses on the field of robotics and artificial intelligence

Harbin Industrial Intelligence is a leading enterprise in the domestic special equipment manufacturing industry, mainly involved in the two major fields of robotics and artificial intelligence. It is mainly engaged in intelligent manufacturing business. It has a full industrial chain layout around industrial robots. Currently, it has formed core components covering upstream industrial robots and midstream industries. The complete industrial chain of robot body and downstream industrial robot applications and industrial robot services. It can professionally provide advanced intelligent flexible production lines for customers in industries such as automobiles, auto parts, and medical equipment. The company currently serves more than 30 customers including Tesla (Shanghai), NIO, BYD, Shanghai Volkswagen, China FAW Group, French Renault, Chery Jaguar Land Rover, Changan Ford, Volvo, Guangzhou Automobile Honda, Brilliance BMW, Baoneng Automobile, etc. Many well-known automobile manufacturers at home and abroad, as well as international first-line auto parts suppliers such as Cosma and Gestamp.

In order to further improve profitability and maintain strong market competitiveness, Harbin Industrial Intelligence continues to strengthen cooperation with high-end auto companies. In the first quarter of this year, it undertook the lotus project, which used multiple advanced technologies, such as narrow-side spr, FDS (self-tapping screw connection), aluminum laser welding, etc. The entire system was developed by the company itself. In addition, Harbin Industrial Intelligence is also the second intelligent manufacturing enterprise in China that adopts the advanced technology of “automatic tightening assembly of rear cover based on vision system”. The company uses its first-mover advantage to further develop new energy vehicle corporate customers. In the first quarter of this year, Harbin Industrial Intelligence signed new energy vehicle production line orders with Weilai, Nanning Ningda, Geely PMA, Yutong Automobile and other auto companies. In the future, it will further increase cooperation with new energy vehicle companies and strive to contribute to the country’s new energy strategy. Make due contributions.

In addition, Harbin Industrial Intelligence has recently relied on its technological advantages to quickly enter the military industry. On January 17, Harbin Industrial Intelligence announced that it intends to acquire 97.9626% of the equity of Jiangji Minke. Jiangji Minke can create synergies in the military business with Harbin Industrial Intelligent Subsidiary Ruifu Electromechanical, which will promote the company’s diversified development and increase new performance growth. point.

On January 25, Harbin Industrial Intelligence also signed the “Strategic Cooperation Framework Agreement” with Aerospace Xintong Technology Co., Ltd. to further strengthen the exchanges of products, technologies, markets, and personnel between the two parties, and jointly promote 5G, artificial intelligence, big data, and high-end The popularization and commercialization of technologies such as intelligent manufacturing and robotics in state-owned industrial enterprises jointly promote the technological transformation and industrial upgrading of key state-owned enterprises.

The future development potential of the intelligent manufacturing industry is huge

Insiders pointed out that the industrial Internet, as a software element of factory digitization, its long-term economic empowerment lies in promoting “cost reduction and efficiency enhancement” in the production and sales management link. The Industrial Internet is the core path for the transformation of the domestic manufacturing industry. Examples of applications in textile, electronics, auto parts and other fields have already appeared. Traditional domestic manufacturers are still facing the situation of low industrial added value and low capacity utilization rate, and the marginal output value of the industrial Internet has enabled the performance of the existing trend in recent years.

Ping An Securities Research Report previously stated that the “14th Five-Year Plan” provides guidance for the future development of the intelligent manufacturing industry. There are a lot of investment opportunities in robotics, high-end CNC machine tools, semiconductor equipment, lithium battery equipment, photovoltaic equipment, rail transit equipment and other fields.

During the 2020 International Industry Fair, Harbin Industrial Intelligence, with the theme of “New Technology, New Industry, New Medical”, showcased new products such as blood sampling and puncture robots, HA006B intelligent arc welding machine, various application robot workstations, and AI industrial design and vision. The cutting-edge achievements in the field show the world the intellectual power of China’s high-end intelligent manufacturing.

In 2021, Harbin Industrial Intelligence stated that it will be based on the automotive industry. On the one hand, it will strive to break the monopoly of foreign brands in the application of industrial robots in the automotive field by improving product performance, cost-effectiveness, and process level; on the other hand, it will also work hard in arc welding. , Ship welding, hardware industry and other general industrial fields have made breakthroughs. In addition, Harbin Engineering Intelligence will invest a lot of manpower and financial resources in the research and development of robot ontology, including process algorithms, control algorithms, etc.; it plans to form a research and development team focusing on AI vision to strengthen its dominant position in the field of artificial intelligence applications. In the future, the company will accumulate strength in the research and development of new technologies, expand the “new industry + new medical” layout, and work hard to serve and continue to empower China’s intelligent manufacturing.