Understanding customers’ thoughts, Delution’s architects creatively designed a tube house with 2 mezzanines. Help the house to receive a lot of sunlight and good air circulation so that you can save energy from lights and air conditioners without spending too much. Specifically, the 6m wide tube house is located in a densely populated residential area in Tebet, Jakarta Selatan. Homeowners want architects to be able to create many small rooms in the house and later when conditions permit, they can still build higher without affecting the original structure. At the same time, the owner wants this house to have 3 floors but if viewed from the front, it has only 2 floors and is on par with other houses in the area. Therefore, the architects decided to divide the height of the floor, one floor of this house is only half the height of ordinary houses and will call this mezzanine. Each mezzanine will be built and designed to suit the requirements and pocket of the owner. From the first mezzanine to the last mezzanine is connected by a large space, which provides natural light and air to the house. Between the spaces are wooden stairs, the main way in the house; also family members can interact and talk directly from different floors without having to raise their voice. In addition to the indoor space, the architects also made a 1-meter-wide corridor running along the house from front to back to get light and natural air sources because the indoor space has glass doors installed on the ceiling. This hallway is also the place to place the water pump, bicycle, outdoor equipment and also the second entrance to the home. The house is installed with transparent glass on the ceiling to get the light source and the hallway is a resource for the house to always be naturally ventilated. The architects also installed many drainage systems in the house premises to prevent water from entering the house when it rains because the floor of the house is lower than the street level. In the house, on the first mezzanine floor is an integrated kitchen and dining room. To avoid limited space, the dining table is made in a folding style so that it can be expanded if needed. The wooden dining table can be opened and folded to expand the space. The folding table can be unfolded as needed for mobility with limited space. The kitchen and dining room on the first mezzanine floor can be seen through the bottom glass under the second mezzanine façade, so the people on the first mezzanine can see if anyone has come to the house. Each floor of the house is about the same height as a regular mezzanine. For the front area of ​​the house, the architect made the upper half of the house protrude 2.5m so that the first floor serves as a parking space and outdoor seating space. On the second floor, using a large curtained glass panel on the façade as the main bathroom, it also becomes an interesting facade element. The courtyard in front of the house. The bedroom space uses elegant and elegant white colors. The bottom glass panel at the foot of the first floor facade helps people inside the house to know if someone is outside without having to open the door. 1st floor design (1: Garden;

The speed of light (more generally, the speed of propagation of electromagnetic radiation) in a vacuum, denoted c, is an important fundamental physical constant in many areas of physics. It has an exact value of 299,792,458 meters per second, because the meter length unit is redefined based on this constant and the standard second. According to special relativity, c is the maximum speed that all energy, matter, and information in the universe can reach. It is the speed at which every massless particle bound to physical fields (including electromagnetic radiation such as light photons) propagates in a vacuum. It is also the propagation speed of gravity (such as gravitational waves) predicted by current theories. Particles and waves travel with velocity c regardless of the motion of the source or of the observer’s inertial frame of reference. After Einstein founded relativity, it became known that the speed of light is indeed very fast, because this is the upper limit of the local speed in the universe, and no other speed can be exceeded. through it. Moreover, regardless of the medium in the frame of reference, the measured speed of light is exactly the same. Based on the principle of the constant speed of light in relativity and the highly accurate measurement of the speed of light, physicists have also determined the speed of light to be 299,792,458 meters/second without affecting the speed of light. affect the current physical quantity. In this way, people no longer have to worry about accurately measuring the speed of light, and can also solve the problem of errors in the equipment used to determine the clock. The speed of light propagating in a vacuum is independent of both the motion of the light source as well as of the observer’s inertial frame of reference. The constancy of the speed of light was postulated by Einstein in his 1905 paper on special relativity. Physicists can now only experimentally confirm the speed of light by methods above two Two-way speed of light is frame-independent, because the speed of light cannot be measured in one-way speed of light, ignoring some conventions of uniformity. synchronization between the clock at the source and the clock at the receiver. Whether it’s electron transition, nuclear fusion, nuclear fission, or the annihilation of yin and yang matter, these processes produce light. Once light is created, their speed will immediately reach the speed of light, and they will always travel at this speed. If light were not absorbed by matter, they would not be dissipated in the universe, and the speed would always remain at the speed of light. For example, the first photons created in the universe 13.8 billion years ago are still present today, and they travel through the universe at the speed of light. So, how did light reach the speed of light? How does light maintain the speed of light? What is the driving force that drives the light forward? If it is explained from the point of view of the particle nature of light, then light is composed of photons with no rest mass. According to special relativity, since the static mass of photons is zero, their speed can only be the speed of light. According to the Higgs mechanism of the Standard Model of Particle Physics, when photons without static mass pass through the Higgs field throughout the universe, the photons will not be coupled, so they will not gain static mass, and their speed will not decrease. Once the photons are generated, their speed will directly reach the speed of light, and there is no acceleration from zero to the speed of light. Propagation of photons does not require energy to propagate, if they were not absorbed by matter or a black hole, they would always travel aimlessly through a vacuum at the speed of light. On the other hand, if explained from the evaporation of light, the nature of light is electromagnetic wave. Maxwell’s equations of electromagnetism show that electricity and magnetic fields are essentially unified, that a changing electric field excites a magnetic field, and a changing magnetic field excites a repeated electric field, creating out electromagnetic waves. Since electromagnetic fields are formed at the speed of light, electromagnetic waves travel at the speed of light. The generation and existence of electromagnetic fields are independent of the medium, so light can travel at the speed of light in a vacuum. Although the spatial structure continues to expand, light propagating through space will appear redshift, but they will not completely disappear in the universe.

In difficult camera angles with low, fragmented and uneven light sources along with fast-moving models, vivo X60 Pro proves its ability to take professional photos, capturing the movement of the model and the shape of the halo on top Start with Camera Gimbal 2.0. Photo: NAG As one of the world’s leading companies in the field of technology and always putting people’s needs at the center of development, vivo is constantly improving as well as choosing a direction to improve image quality in a radical way. best: improving the hardware (lens), instead of just improving the AI ​​(software) like many other phone manufacturers. The premium lens quality preserves subject sharpness, while the bokeh is evenly rounded, smooth, easy on the eyes, and professional. Photo: NAG ILLUSTRATION vivo launched the flagship X60 Pro in its high-end X series. The smartphone carries a 48MP + 13MP + 13MP triple camera with the ZEISS logo inlaid on the lens, while the ZEISS Vario-Tessar branding is engraved below the camera. Both ZEISS and vivo aim to differentiate and maximize efficiency in imaging, combined with software and algorithmic expertise. It was this similarity that paved the way for a push in the mobile photography market, offering outstanding photographic performance. At the super-wide angle, the camera on the X60 Pro gives accurate proportions between objects and details in the image, without distortion like most mobile cameras today. Photo: NAG TRAN MINH DUONG Equipped with ZEISS lenses, along with valuable upgrades in parameters and advanced vivo shooting features, the flagship vivo X60 Pro will bring users an engaging mobile photography experience. more led, more innovative and more professional than ever. The camera of the X60 Pro will give sharp images, no distortion, no aberrations and true colors. With a history spanning more than 170 years, ZEISS has been associated with many important events of great significance to mankind. The most typical is the first human exploration of the Moon. It was the ZEISS lens that was used to capture the moment Apollo 11 landed on the Moon in 1969 – a very important event in human history. In addition, for longtime photography players, ZEISS is a very special name, has existed for a long time, and has become a legend. It’s easy to see famous artists and filmmakers like director Todd Phillips and Joker (2020) cinematographer Lawrence Sher using camcorders with ZEISS lenses.

Not only is the space used a lot, the toilet also becomes a relaxing place for family members after a hard working day. For homes with small areas, especially tube houses, homeowners should pay attention to the following factors when designing toilets: Location Whether the tube house is narrow, ventilation is still the most essential factor for the toilet. If possible, homeowners should use natural ventilation when designing this space. In townhouses, the toilets are usually located next to the skylight or towards the side of an alley or space, because these places can connect air with the natural environment. The toilet is located in the corner of a townhouse. (Illustration) Many people often build bathrooms and toilets located on the house entrance and on the kitchen area. The rest of the areas can be flexibly arranged so that it is well ventilated and convenient for travel. Where the house is too narrow, the “extreme” homeowner will arrange the toilet under the stairs. Because this space is very narrow and mysterious. If there is no other location, the homeowner needs to install a ventilation fan. Acreage A toilet with an average area just enough, not too cramped, relatively standard, usually about 4m2. Toilets are considered small when the area is less than 2m2. Which still includes 3 areas: toilet, sink and shower area. A toilet with an average area of ​​just enough, not too tight, is usually about 4m2. (Illustration) Besides the ventilation factor, toilets need to distinguish two spaces: dry and wet. The dry area has toilets and sinks, while the wet area is used for bathing. Separating these two areas will make the toilet clean, easy to clean, and scrubbed. Sanitary equipment In order for a narrow toilet to look wider, the homeowner must first use compact, space-free toilet facilities. Do not be greedy to use the lavish sink or the vanity with a sophisticated design. Narrow house should choose compact toilet equipment. (Illustration) Walls should use neutral colors, as the background for patterns on shower curtains or wall paintings. nice picture The small restroom will become fresh when covered in vibrant yellow paint. The white curtains with green checkered edges soften the edges of the tub. The pictures of funny animals painted on the wall also bring a lively feeling to the user. Narrow the decorative focus when designing a small toilet space. A decorative highlight should be used as the main point, be it a curtains, a shower or a prominent blue-white porcelain vase. Tiles Small toilets should choose light colored tiles to create a sense of airiness. Wall tiles can be placed close to the ceiling. It is possible to tile the toilet wall close to the ceiling. (Illustration) Avoid using bricks with cumbersome patterns, dark colors, easy to cause frustration and make the toilet feel narrower. Ceiling paint colors should also choose light colors to make the space not heavy. Light Gone are the days when toilet lighting only needed to be bright enough. With the modern trend of toilet interior modernization today, lighting system is more and more interested in bright and beautiful criteria. Clarity is the first criterion. In addition to the common light source for the restroom, there should be lights in specific areas such as the bath, sink or vanity. These local light sources help the user have the necessary light when using. After that, the toilet only needs to be bright enough, with the trend of modernizing the interior, it is necessary to have a beautiful light. (Illustration) Beautiful light is also an important factor. Gentle light sources arranged in hidden corners or accent spaces will bring a feeling of lightness, relaxation like at the spa. You can use more deodorizing lights such as compact bulbs using ozone to deodorize, making the toilet space both bright and clean. Phuong Anh (synthetic)

For those who do office work, after a day of working with computers and air-conditioned rooms, using the outdoor bathroom definitely brings a feeling of refreshment, much more comfortable than the indoor bathroom. . Should make the most of the open space for outdoor bathrooms. (Illustration) Make use of open space When embarking on designing an outdoor bathroom, the first step homeowners should do is try to create an open space for the bathroom. An open design bathroom helps users feel more comfortable and closer to nature. The open bathroom helps the user to both watch the sky, breathe the outside air and soak in a cool bath. Bath just right Depending on the aesthetics, the homeowner can arrange the bathtub in a simple or luxurious style. On the market today there are many types of bathtubs with large sizes. However, you should choose the size of the bathtub to suit the outdoor bathroom space. Choose the right bath size for the space. (Illustration) Color scheme There are many color schemes for an outdoor bathroom, but it is best to decorate the bathroom with the colors of the surrounding landscape. If the bathroom has many green trees or flower beds, choose main colors such as light yellow or light blue. For an outdoor bathroom near the swimming pool area, it is recommended to use colors such as blue, green or orange. If homeowners want to create a striking outdoor bathroom space, you can use black or red. Outdoor bathrooms erase the distance between people and nature. (Illustration) Floor For outdoor shower floors, it is recommended to choose tiles, anti-slippery stones for flooring. Stone in gray and white color can be used to decorate the border around the bathroom. Patterned stone tiles are used to brighten the bathroom space. The light To create a relaxing space for an outdoor bathroom, light is an indispensable factor. Brightness is the first criterion because with the requirement of body cleaning, no owner wants his bathroom to have weak light. Priority should be given to using natural light for outdoor bathrooms. (Illustration) The light sources are stable by area such as lavabo, bathtub, vanity … and the lights of each area are only turned on when the homeowner uses it. In addition, there must be a common light source to ensure the entire bathroom is always full of light. In today’s modern bathrooms, the bright and beautiful elements are equally important. With an outdoor bathroom, homeowners should prioritize natural light because it brings charm to the space. Phuong Anh (synthetic)

Believe it or not: there was a time when it was a good idea to attach some wings to an armored tank and use it in combat. The flying tank is designed to use the tank’s firepower and combine it with air force use, but as you might have guessed, it doesn’t work correctly. These are basically gliders attached to tanks, and they can be towed or carried underneath an aircraft. They will then be released and glided into the front to support infantry operations on the battlefield. They are complementary, but different projects never achieve much success. Instead of changing the way humanity fought during the war, this concept was discarded shortly after World War II, although the Soviet Union continued to develop the concept in the 1970s. While flying tanks have become a thing of the past, most of them have been replaced by modern technology. Gunship AC-130 Gunship is fully equipped with equipment and weapons for military aircraft. The fighters carry a 25mm or 40mm multi-barrel Gatling gun and a 105mm cannon, effectively making them far superior to a winged tank. Video phone Long before the invention of television, people imagined a world where they could engage in a telephone conversation while seeing the person they were talking to on the other end of the line. Because of this, technology was developed at a huge cost to the consumer market envisioned about video telephones for decades. By the time such a product was made, it was already too expensive and very few people could afford it. The first devices cost $ 1,500 for a single phone, and the service cost nearly $ 100 a month, making it unaffordable for consumers and companies hesitating to buy. At the beginning of the millennium, companies were still working hard to transmit video communications over phone lines, but the technology was still expensive and difficult to perfect. This eventually led to a complete abandonment of dedicated television systems over telephone lines. Instead, various video conferencing facilities use data networks and the Internet to make calls. Today, people use apps to communicate, although the technology is still available to anyone who wants to use it, most people don’t bother showing up with the person they communicate with, instead they prefer texting, emailing or simple phone calls. Video phone calls have been around for a while, but they have barely changed the world. People are still communicating through voice more than the video alternative, and that’s hard to change. Fiske reader Bradley Allen Fiske made many inventions throughout his life. Of course, not all of these inventions are welcome, like his telescope for naval guns. One such invention, the Fiske Reader, sought to change the way the world absorbs information, but it could not keep pace with the world’s readers. The idea is to use a small handheld device with an amplifying lens for one eye and a shield for the other eye. The text was copied using photo engraving, and printed on cards measuring about 6 x 2 inches. It cannot be read with the naked eye. Using the device, one person can look through the lens and read everything printed on the card. The idea is to reduce the need for paper, to create a new pocket reading medium, and to literally change the way people use text. To prove his invention, he condensed Mark Twain’s The Innocents Abroad on 13 cards. He believes he has revolutionized the publishing industry. It’s not a bad idea, but it’s not how people want to read, and the Fiske Reader was never mass produced. Cryptocurrencies The world’s first cryptocurrency was Bitcoin. When it was first created in 2008 (by an unknown person or group), it looked like it could be a world-changing invention. Cryptocurrencies are forms of digital currency that exist without a central bank or regulator. They are relatively complex, and they can be “mined” by using sophisticated graphics chips with their processing power to create new blocks in a coherent blockchain. Basically, the numbers are collected and slowly create new Bitcoins. Initially, Bitcoins had no real-world monetary value, but by 2016 their value soared to $ 2,900 and within 5 years they peaked in value at $ 19,511, however the price That value was quickly reduced. Theoretically, cryptocurrencies could change the way people conduct business internationally. However, the anonymous nature of exploiting and spending them really only benefits criminal organizations. Although it is a decentralized currency system, it is still susceptible to the same problems as a traditional currency, including counterfeiting, market manipulation, etc. Cryptocurrencies still exist and there are many other things that are not just Bitcoin. However, it is unlikely to change the international monetary system for a multitude of reasons. Motion picture When you go to the cinema, you find yourself sitting in a large cinema, and the only significant light source is the strong projection light in the projector. That light is reflected off the screen, and it works best when there is no other light source, as turning on one of these will blur the images, making it harder to see. There was a time, though, when it was thought that it was best to watch movies in broad daylight. In 1910, that is exactly what some people have tried to do with “daytime motion pictures”. It’s a trend that has spread across America, and it’s spread like wildfire. This concept makes use of darker screens, brighter and more powerful projectors, and it is misinterpreted that movies should be enjoyed in full daylight. California has even passed laws that theaters must have enough light in their theaters for patrons to see. Of course, the fever didn’t last too long. Movie theaters complain that the film doesn’t look good in well-lit rooms. Many other problems that make Daylight Motion Pictures a thing of the past, ultimately still do not change anything and movie theaters still need to watch movies in dark rooms. Cinerama Long before IMAX, the best way to watch widescreen movies was through a process called Cinerama. It was developed by the motion picture industry to counteract the growing trend of television. It was first used in 1952, when This is Cinerama, which premiered in front of a cheerful and enthusiastic crowd on Broadway. The new format projects video onto three large, deeply curved screens, creating extremely large images. It is considered the future of watching movies. However, it never got hold of the market, and in the end it fell into oblivion. The problem with Cinerama technology is, at least initially, it requires three projectors (and three projector drivers) to perfectly synchronize their projections at the same time. Without that, it won’t work properly, so Cinerama needs a lot of people and money to get it going. Most movie theaters are not ready to upgrade due to the cost. By the time the digital technology allows interconnecting projectors without many users, it is too late. There are still a handful of Cinerama locations in use across the country, but it’s a novelty rather than a “world-changing” movie medium. Flying car People have imagined a world full of flying cars even before cars were invented. Over the years, there have been a number of legitimate attempts to create them. Various models were developed in the early 20th century, but they never changed the world. In 1940, Henry Ford said: “Remember my promise: the combination of airplanes and cars will be born. You can smile, but it will come ”. He’s not completely wrong either. The Aerocar flew in the sky later this decade. That car never entered production, and neither did any other prototypes. The biggest problem with flying cars has to do with humans. Most of us are not trained to fly an airplane, much less a winged car or a jet that can keep it aloft. Because of this, there is no government that allows a person to fly around the country without serious regulation. Aerocar, for example, can only fly from airports and cannot simply take off from a highway. The dream is still there, for many inventors, and very often, a new flying car makes a stir around the world. In September 2020, Japan tested a new manned flying car for the first time and although it hasn’t changed the world, theoretically, maybe someday.

The use of wallpaper increases the aesthetic and visual effect: The vertical striped patterns “pull” the height of the ceiling up, in a large space of an apartment building with low ceilings. Surface smoothness Wallpaper can be used in many spaces, many different rooms. The surface smoothness of wallpaper comes in different degrees, from rough to glossy. With papers with a smooth, glossy surface, the advantage is that it is easy to clean, clean if there is a stain and suitable for places with high humidity, areas related to water. However, in some specific cases it is necessary to pay attention to the smoothness (roughness) of the surface. On large areas of walls, or where there is a strong light source, do not use paper with a very smooth – shiny surface; because it will cause reflections, reduce the aesthetic efficiency in the interior space, and may even cause dazzling. In addition, the gloss of the wallpaper will also easily reveal the defects of the uneven plastered wall surface. Patterns match the space The big advantage of wallpaper over water paint is the pattern. It is necessary to take advantage of this advantage when using this material. There are also types of wallpaper “plain” only color, no pattern, but if used like that, then … like paint. The pattern of the wallpaper is very rich and this is also difficult because it is easy to dazzle when choosing. Choosing the color and pattern of the wallpaper needs to be based on the nature of the space, the specific function room, the size of the wall, the style of the decoration, the furniture … For example, with a space. classical interior space, you can choose sophisticated and aristocratic patterns; in a modern space, choose simple patterns and strong lines. For large walls, large patterns can be used; if the area is not large, if the area is small, use small patterns. Wallpaper should be used as a highlight, like at the head of a bed. Not too rampant Wallpaper should be used in meaningful areas as a highlight, not too rampant. The highlight can be behind the TV shelf, the bedside, the reception area … In addition to the highlight meaning, using wallpaper on too many wall areas has a negative effect: It reduces the likelihood of exchange the moisture of the wall with the environment. When the humidity in the air is high, the wall will absorb less water vapor in the air, and when the humidity in the environment decreases, the amount of water vapor in the wall inside the wall will escape, creating balance. Using wallpaper a lot, when the humidity is high, there will be the phenomenon of “sweating”, running water on the surface. In the case of using multiple wallpapers, on a large area; It is important to pay attention to choose patterns that are light, sunken, with elegant colors, to avoid confusion. Prepare a stable surface When deciding to use wallpaper for a particular surface or wall area, it is necessary to check and locate relevant objects and equipment on the wall surface, such as switch surfaces, sockets, lamp positions. walls, television, air conditioner, clothes hanger, nails – picture hangers, hangers … These positions need to be located accurately and technically. Because if it is necessary to adjust, change the location, or repair those related to these equipment and objects; will leave unattractive “scars” that are difficult to repair – especially when the used paper sample is no longer available. When pasting the wallpaper on the surface of the wall, which already has equipment and objects on it; and if the location is correct; It is best to remove the covers, the wall-to-wall base of the devices, and reattach after finishing. Then these masking surfaces will overlap the surface of the wallpaper, more aesthetically if left intact and cut – paper around the masking surface, the base – is easy to error, not beautiful smudges./.

The Epson EpiqVision Ultra EH-LS500B ATV is equipped with 8-point angle adjustment The three products all possess trendy and compact designs, consistent with the aesthetics of the living space. These are projectors equipped with advanced 3LCD technology, capable of delivering clear, bright and vivid images even in high-light environments. With a laser light source, these projectors have a lifespan of up to 20,000 hours without the need for light source maintenance, making it more cost-effective compared to projectors with a light source. The Epson EpiqVision Mini projector EF-12 has 1000 lumens of brightness and Full HD resolution, and supports 4K signal input, allowing users to enjoy movies with impressive projection quality. Users can choose the screen size to suit the space and viewing distance thanks to the ability to project a screen size of up to 150 inches, which is three times larger than conventional 50-inch TVs. Epson EpiqVision Mini EF-12 In particular, the Yamaha built-in speaker is capable of acting as an independent smart speaker, bringing a vivid sound experience to the user without using an external speaker device. The EpiqVision Mini EF-12 includes the Epson Online Meetings feature combined with the Zoom application, allowing users to place calls without the need for a PC. Plus, with Chromecast built-in, users can stream their favorite entertainment apps to the big screen from their Android or iOS device, Mac, Windows or Chromebook. Users can also plan the day, access schedules, or control smart home devices like regulating the indoor temperature and lighting with the Android TV feature. Two products EpiqVision Ultra EH-LS300B ATV and EH-LS500B ATV It is capable of presenting 4K Full HD and 4K PRO UHD content at a close distance respectively, for sharp and vivid picture quality. In addition, the EH-LS300B ATV is also integrated with a 5.1 surround sound system designed by Yamaha with AudioEngine, for powerful and realistic sound quality. The EpiqVision Ultra EH-LS500B ATV projector features a variety of new color systems for optimum picture quality in a variety of environments. Whether the movie scene is generally dark or bright, Gamma Correction according to the scene automatically adjusts the actual scene from the projector to provide a clearer and more natural picture. On the other hand, the vivid color system is adjusted according to the sharpness and brightness settings like the TV, optimizing Gamma for higher contrast and color temperature. Epson EpiqVision Ultra EH-LS500B ATV Meanwhile, the EpiqVision Ultra EH-LS300B ATV comes with 8-point angle adjustment that completes a rectangular view of images on curved surfaces through the Keystone editing function. This product also integrates Chromecast so that mobile devices can easily share videos and audio on the screen wirelessly. Epson EpiqVision Ultra EH-LS300B ATV Another plus point, this projector device is safe for children. The projector’s laser light source has a motion sensor that automatically cuts off the laser beam when someone looks directly at the projector’s light source. In addition to enhancing users’ gaming and movie-watching experiences, these two projectors can also stream unlimited online content for you to enjoy live football matches. Music, news or TV shows provided by Android TV.