Apple has rearranged the selfie camera, speakerphone, front camera, TrueDepth camera to be placed closer together, in which the speakerphone is moved to the top instead of in the middle of the TrueDepth camera system as before. Apple is also looking to source VCSEL chips with sizes 40-50% smaller than those used on older iPhone generations. This chip is used for 3D face recognition for iPhone 2021. This allows Apple to shrink the size of the Face ID sensor cluster. Leaked design image of iPhone 13. In addition, the size of the rear camera cluster on the iPhone 13 Pro will increase because of the integration of a new sensor. If this is correct, the performance of the camera on the iPhone 13 Pro will increase significantly compared to its predecessor. Earlier, a rumor also suggested that the iPhone 13 versions will be about 0.17 mm thicker than the current iPhone 12. With a thicker size, Apple will equip the iPhone 13 with a larger battery. This is necessary as the iPhone 13 is also expected to use an LTPO panel with a 120Hz refresh rate that consumes more power than the iPhone 12 screen. One rumor also claims that the iPhone 13 Pro will have a 1TB capacity version. With this capacity, users no longer worry about memory storage. And of course, the price of the 1TB capacity version is not cheap either.

Last year, this feature was expected to be available on the iPhone 12 Series or even on the two high-end iPhone 12 Pro and iPhone 12 Pro Max versions. However, changes to the design and integration of 5G networks have caused Apple to delay equipping this feature to the iPhone. iPhone 12 Pro Max. (Photo: David ImeI / Android Authority) Therefore, no matter how “genuine” it is, the iPhone 12 Pro Max still has an inferior score compared to its competitors because it is only equipped with a screen with a 60Hz refresh rate. However, according to reputable sources, the new generation of iPhones launched in September this year – expected to be called iPhone 13 or iPhone 12s – will be equipped with an LTPO screen with an upgraded refresh rate. 120Hz. iPhone 13 build. (Image: 163) In addition to smoothness, there are other reasons why the 120Hz LTPO screen expected to be equipped on the iPhone 13 is attractive. Accordingly, in addition to the advantage of providing a smooth experience, a high screen refresh rate affects battery life; not many applications are configured to take advantage of high refresh rates; requires additional hardware between the phone and the display. (Photo: Internet) However, LTPO screen technology will solve all the above inadequacies. This technology allows the refresh rate to adapt to apps, making it possible for the display to reduce the refresh rate from 120Hz to just 1Hz to save battery. Currently, LTPO screens have been equipped on OnePlus 9 Pro and Galaxy S21 Ultra. Therefore, instead of being the first to adopt a screen with a high refresh rate, Apple’s decision to wait will help its iPhone to integrate the best technology. Speaking to TomGuide, Techsponential analyst Avi Greengart said: “Apple will require extremely tight tolerances from Samsung Display on the screens and will name them ProMotion – like the ones on the iPad Pro. …” (Photo: AppleTrack) With the ecosystem as huge as it is, so when iPhones are equipped with a display with a high refresh rate, apps will also be configured to take advantage of the 120Hz refresh rate. Also, when Apple adopts a particular type of technology, other phone makers will have to improve the technology or come up with something special to compete with the new iPhone. (Photo: All Tech News) For example, Samsung will use screens with higher refresh rates or research new screen technology to help reduce battery consumption even more to provide the best user experience.

High refresh rate monitor . According to CNET, rumors suggest that the iPhone 13 Pro screen will support 120 Hz refresh rate for smoother scrolling and transition effects. Before, The Elec reported that Apple has ordered a large number of monitors from LG Display and Samsung Display, in which LG will provide LTPO panels with always-on (always on) features and high refresh rates. Image: Business Insider . Rear camera is arranged diagonally . Series of edited photos MySmartPrice Posted in April, it shows that the two cameras on the iPhone 13 are arranged diagonally instead of vertically. The upper right corner is still the LED flash, while the lower left corner is the microphone. The design language of the device has not changed with 4 square frames, 2 flat glass surfaces similar to the iPhone 12 series. Photo: Apple Hub . Shorter screen hole . In the video on hand, the iPhone 13 Pro model is channeled Macotakara share, the length of the hole is 26.8 mm, while the iPhone 12 Pro is 34.83 mm, about 22% shorter. Based on the model, Apple will move the speaker to the top edge while pushing the remaining sensors lower. Image: Macotakara . Upgraded camera . Some sources say that the iPhone 13 will have a periscope camera for better zoom capabilities, an improved ultra-wide-angle camera for better night shots than the iPhone 12. Meanwhile, the LiDAR depth sensor will equip both. 4 versions. In early May, the model of iPhone 13 Pro Max due to channel Unbox Therapy The share shows that the rear camera cluster is larger than the previous one, implying that the camera on the device will be upgraded. Image: Unbox Therapy . Touch ID is back . After being removed for 3 years, the Touch ID fingerprint sensor can be brought back by Apple to the iPhone 13 and placed under the screen. According to the CNET This feature has been rumored on the iPhone 12 series, but the official product is only equipped with Face ID face recognition. If not integrated into the screen, Apple can embed Touch ID in the power button similar to iPad Air 2020. Photo: MacRumors . Remove Lightning port cổng . Analyst Ming-Chi Kuo from TF International Securities predicts that the iPhone 13 Pro Max version will remove the Lightning connector, switching to the MagSafe wireless standard for charging and data transfer. The remaining iPhone 13 versions still use the Lightning port. This is Apple’s long-rumored plan, rumors about it appearing more after MagSafe was fitted to the iPhone 12 series last year. Image: AllAppleNews . Apple launches new purple iPhone and improved iPad Pro M11 During the Spring Loaded event taking place at 0:00 on April 21 (Vietnam time), Apple introduced a series of products including iPhone 12 purple version, new design iMac, AirTag card, iPad Pro M1.

iPhone 13 can satisfy the user ?. Photo series by MySmartPrice posted in April shows the position of 2 cameras on the iPhone 13 arranged diagonally instead of vertically. The top right corner is still the LED flash, while the lower left corner is the microphone. The design language of the device remains unchanged with 4 square frames, 2 flat glass surfaces similar to the iPhone 12 series. The camera can be folded diagonally instead of straight like previous generations. In the video on hand the iPhone 13 Pro model is channeled Macotakara Sharing, the machine’s hole length is 26.8 mm, while the iPhone 12 Pro is 34.83 mm, about 22% shorter. Based on the model, Apple will move the speakerphone to the top edge while pushing the remaining sensors lower. The camera on the iPhone 13 has the potential for better zoom capabilities, the ultra-wide-angle camera is improved to capture better nights than the iPhone 12. Meanwhile, the LiDAR depth sensor will be available for all four versions. In early May, the model of iPhone 13 Pro Max due to the channel Unbox Therapy Share shows that the rear camera cluster is larger than the previous one, implying that the camera on the machine will be upgraded. Many users are expecting the Touch ID fingerprint sensor feature back in the iPhone 13. Many users are expecting the Touch ID fingerprint sensor feature that could be brought back to the iPhone 13 by Apple and placed under the screen. According to the CNET This feature was once rumored on the iPhone 12 line, but the official product is only equipped with Face ID facial recognition. If not integrated into the screen, Apple can embed Touch ID into the power button similar to the iPad Air 2020. “Super leaker” Ming-Chi Kuo predicts that the iPhone 13 Pro Max version will remove the Lightning connection port, switch to the MagSafe wireless standard to charge and transfer data. The rest of the iPhone 13 models still use the Lightning port. This is Apple’s long-rumored plan, the rumor of it appearing more after MagSafe came equipped with the iPhone 12 last year.

Wallpaper set has 6 different designs, sold on the author’s website for about 6 USD for 2 designs. The wallpaper above is inspired by the Apple Face ID icon. When the battery is full, the wallpaper will be a smiling face with blue rings around. Conversely, tired face with red ring will appear when the battery is below 20%. In the charge state, the wallpaper becomes an unexpected face with golden rays of electricity. The first set of wallpapers with 3 shades designed by Ben Vessey. Ben Vessey also designed an apple-shaped wallpaper. Wallpaper will show apple (intact, not bitten in half) when full battery and apple core shape when battery is depleted, simple smiley face is between 20% – 100% battery and a frown face with battery short. All designs are very simple and easy to understand. Ben Vessey shared, the design of 6 smart wallpapers helps solve two main problems. One is that in case the user plugs the charger cord incorrectly so the phone will not recognize the battery, then with smart wallpaper, users will easily detect it. The second problem is that smart wallpapers will report low battery status. “When using the phone, our subconscious mind often ignores the low battery warning of the device. My designs will help users avoid that situation, ”shared Ben Vessey. The second set of backgrounds are highlighted with apples. Previously, according to predictions from some technology experts, the new-generation iPhone products can be equipped with Pro Motion technology, 120 Hz refresh rate and 15-20% lower power consumption than iPhone 12. Specifically, the iPhone 13 Pro and 13 Pro Max models will be equipped with LTPO energy-saving screen technology. This screen technology has appeared on the Galaxy S21 Ultra and Oppo Find X3 Pro. The LTPO display can automatically adjust the scan frequency based on the content being played. For example, when the user is playing games or watching action movies, the screen will increase the refresh rate to 120 Hz. When the user is not in use, the screen of the machine will automatically reduce the scanning frequency to lower, helping to save battery power. According to some leaked sources, Samsung and LG Display are in the process of converting production from LTPS to LTPO screens, which could be completed in the first half of 2021. However, there are opinions that capacity to make LTPO screens lower than LTPS because companies have to add some manufacturing processes.

In addition, the 3D image also shows that the rear camera layout has a slight change in position. Two large circle cutouts with two smaller cutouts are placed diagonally together. In it, two large circles are predicted to be the camera lens while two small circles can be LED flash and microphone.

Also, up front, we see three cuts on the notch. As you can see this time, Apple has brought a smaller notch on the iPhone 2021 as seen in the previous leaks. Because the speaker unit is moved above the cameras. There is no clear information about the cutouts on the front of the device but it will most likely be the IR camera, Dot projector, and selfie camera.

The Apple iPhone 13 series is said to be equipped with the Apple A15 chipset, an improved ultra-wide camera, Qualcomm X60 5G modem, up to 1TB of memory and 6E Wi-Fi support.

As mentioned above, the biggest change will be that the LTPO display panel supports a 120Hz refresh rate on the ‘Pro’ variants.

Previously rumored rumors indicate that the next generation of iPhone is expected to be introduced by Apple in the third week of September.

According to Gizmochina