The contest “Make in Vietnam digital products” is about to start. Expected to take place under the chairmanship of Deputy Minister of Information and Communications Phan Tam, in addition to the bridge point at the headquarters of the Ministry of Information and Communications, the press conference to announce and launch this year’s awards is also connected to 5 bridge points at the provincial Departments of Information and Communications. , cities include: Hanoi, Hai Phong, Da Nang, Ho Chi Minh City and Can Tho. In the second year of being held, according to the Award Regulation signed by the Minister of Information and Communications on June 7, “Make in Vietnam Digital Products” in 2021 continues to have 5 categories, including: Excellent digital platform; Excellent digital products; Excellent digital solutions; Narrowing the digital divide; Potential digital products. The second “Make in Vietnam Digital Product” Award will have Gold, Silver and Bronze awards for the categories of Excellent Digital Platform; Excellent digital products; Excellent digital solutions; Close the number gap. As for the category “Potential digital products”, this category only applies to participating units that are non-business organizations, small and medium-sized enterprises or creative start-ups and only the Top 10 are announced. The organization is expected to invite leaders of the Party, State and Government to award prizes to enterprises with high prizes. Products honored at the “Make in Vietnam Digital Technology Product” award in 2021 must satisfy two main groups of criteria, namely: design, creativity in Vietnam and practical value. In the criterion group “Actual value”, the score structure related to revenue, the number of users is 40 (accounting for about 70%). The award also encourages digital technology products of small and medium enterprises and innovative start-ups in the category of “Potential Digital Products”. Regarding the process of reviewing and awarding this year’s awards, the representative of the Organizing Committee said that at the preliminary stage, the subcommittees of the Jury Council will organize grading of documents that meet the criteria through the pre-qualification round. select 12 records with the highest score of each award category. The participating units with records in the group of 12 records with the highest score of each category will present and defend in front of the respective Committee’s Sub-Committees (in person or online) to the Sub-Committees. The evaluation board selects the Top 10 records in order of scores from high to low of each category. At the final round, based on the list of nominations of the subcommittees, the Jury Council held meetings to evaluate and select the Top 10 and the Gold, Silver, and Bronze prizes for the 4 categories of Awards and Top 10. 10 potential digital products. According to the Organizing Committee, the time to receive registrations and applications for the award will last from June 20 to the end of September 20, 1 month longer than the 2020 prize. During the period from June 20 to July 20, businesses can make preliminary registration and receive guidance from the award standing body to prepare documents according to the Award Regulations. Units and businesses send their documents online at the portal with the addresses: makeinvietnam.mic.gov.vn and makeinvietnam.vcci.com.vn.

The Ministry of Information and Communications will hold an online press conference to announce and launch the “Make in Vietnam Digital Product” award 2021 on June 18. This is the second year this award has been held. This event will take place at 6 bridge points, namely at the headquarters of the Ministry of Information and Communications, 5 at the Department of Information and Communications of provinces and cities including: Hanoi, Hai Phong, Da Nang, Ho Chi Minh City and Can Tho. In the second year of being held, according to the Award Regulation signed by the Minister of Information and Communications on June 7, “Make in Vietnam Digital Products” in 2021 continues to have 5 categories, including: Excellent digital platform; Excellent digital products; Excellent digital solutions; Narrowing the digital divide; Potential digital products. The “Make in Vietnam Digital Product” Award in 2021 continues to have 5 categories. Besides, the second “Make in Vietnam Digital Technology Product” award also has changes compared to 2020. Specifically, this year there will be Gold, Silver and Bronze awards for the categories of Excellent Digital Platform; Excellent digital products; Excellent digital solutions; Close the number gap. As for the category “Potential digital products”, this category is only applicable to participating units that are non-business organizations, small and medium-sized enterprises or creative start-ups, and only the Top 10 will be announced. The organization is expected to invite leaders of the Party, State and Government to award prizes to enterprises with high prizes. Products honored at the “Make in Vietnam Digital Products” award in 2021 must satisfy two main groups of criteria, namely: design, creativity in Vietnam and practical value. In the criterion group “Actual value”, the score structure related to revenue, the number of users is 40 (accounting for about 70%). The award also encourages digital technology products of small and medium enterprises and innovative start-ups in the category of “Potential Digital Products”. Regarding the process of reviewing and awarding this year’s awards, the representative of the Organizing Committee said that at the preliminary stage, the subcommittees of the Jury Council will organize grading of documents that meet the criteria through the pre-qualification round. select 12 records with the highest score of each award category. The participating units with records in the group of 12 records with the highest score of each category will present and defend before the respective Committee’s Sub-Committees (in person or online) to the Sub-Committees. The evaluation board selects the Top 10 records in order of scores from high to low of each category. At the final round, based on the list of nominations of the subcommittees, the Jury Council held meetings to evaluate and select the Top 10 and the Gold, Silver, and Bronze awards for the 4 categories of Awards and Top 10. 10 potential digital products. “The Ministry of Information and Communications will create conditions for businesses with winning products through propaganda and promotion activities to develop further with the desire to have more and more good technology products, meeting the development of the economy”, representative of the Information Organizing Committee. In addition, the units participating and winning the “Make in Vietnam Digital Technology Product” award in 2021 will also be considered for inclusion in the List of IT products and services prioritized for investment, rental and procurement in the future. state agencies; List of potential projects calling for investment. At the same time, support to build national brands for products and services of enterprises; exchange, consult and critique on the development mechanisms, policies, strategies and programs of the industry and the development orientation of digital technology products of enterprises.

Automatic disinfection spray device was born to replace human power, invented by a research team at Sao Do University “In order to join hands with the whole country to quickly repel the Covid-19 epidemic effectively, the university’s research team came up with an idea and embarked on perfecting the product. In fact, it can be seen that the automatic disinfection system works very effectively, this is also the achievement of the university’s research team, we are still conducting further research and wish to replicate the model for localities. disease is taking place, reducing human strength” – Dr. Do Van Dinh shared. “This is one of the typical research projects of the university, contributing to quickly repelling the Covid-19 epidemic during this complicated period,” said Dr. Dinh. Immediately after completion, the school cooperated with Hai Duong Provincial Department of Health to install the above 3 systems at 3 provincial quarantine checkpoints (post A) including: In Hoang Tien ward (on Highway 18, adjacent to Dong Trieu town, Quang Ninh); at the beginning of Pha Lai bridge (on National Highway 18, adjacent to Que Vo district, Bac Ninh); and stop at the intersection of Hanoi – Hai Phong highway (the section through Gia Loc toll station). The total cost after completing the installation of the automatic disinfection system is nearly 200 million VND. The device is simple to install, works effectively with traffic through As noted by the reporter, the automatic disinfection sprayer system is designed with 2 devices located on both sides of the lane. On the two devices with sensors attached, the sprayer is suitable for the height of the cars. Each unit has a high-pressure pump motor used to pump disinfectant solution from the fuel tank to the injectors. When a motor vehicle passes by, sensors will recognize the vehicle height to control the pump and pressure valve. Along with that, the nozzles will spray a mist-like solution suitable for the height of the vehicle, including the tank truck; container truck… A representative of the Red Star University research team said that the advantage is that the automatic disinfection sprayer system can operate 24/24 hours, even in sunny or rainy weather conditions. The solution is evenly distributed over the surface of the motor vehicle to save manpower, the solution is faster and more efficient than the manual method as before. Moreover, when passing by, cars do not have to stop but still roll slowly at a speed of 5 km/h, without causing traffic jams. The device not only ensures disinfection spray to prevent epidemics but also ensures traffic and does not cause congestion The nozzles will spray a mist solution suitable for the height of the vehicles Before that, at the beginning of 2021, lecturers of the Faculty of Food and Chemistry of Red Star University researched and continued to produce over 6,000 liters of dry hand sanitizer (Nano silver) to promptly supply to staff, lecturers and suppliers. granted free of charge to agencies and units in the area of ​​Chi Linh city; The faculty of the Faculty of Electrical Engineering successfully manufactured a full-body disinfection chamber with a small, compact design that is convenient to move, operating under an automatic mechanism; research and manufacture 10 automatic hand sanitizer machines equipped in working houses, dormitories, lecture halls and experimental practice centers. In particular, before the complicated development of the Covid-19 epidemic in Chi Linh City and Hai Duong province, to prevent and reduce the risk of infection, to ensure the health of the medical team. With the spirit of initiative, creativity, and speed after 32 hours of work, the school’s staff and lecturers successfully built a robot to transport necessities, donated it to field hospitals, and isolated areas. concentrated in Hai Duong province, contributing to reducing the workload for medical staff and service people.

The disinfection robot combines two methods of UVC and chemical disinfection to help kill bacteria and reduce the spread of disease. The robot also has the ability to move flexibly, remotely or pre-programmed for a certain sterilization route. Le Anh Son, Deputy Director of Phenikaa Institute of Research and Technology (Phenikaa University), said that the robot is also capable of taking on tasks to support epidemic prevention and control in Bac Giang such as: Transporting necessities , monitoring sick and isolated people through monitoring cameras. Phenikaa University’s disinfection robot. The robot is fully self-propelled, avoiding collisions by using LiDAR technology, integrating artificial intelligence to recognize and remind people to wear masks, measure body temperature and a host of other superior features. . On the evening of June 2, the robot was put into operation for the first time. Before that, in the middle of May 2021 when the epidemic was complicated, students of Phenikaa University launched the campaign “Online learning – Show talent against the epidemic”. The students spent time and effort to create a droplet shield for medical staff, medical staff at hospitals, treatment facilities, and concentrated isolation. Up to this point, 10,000 droplet shields have been sent to more than 30 localities, of which more than half have been transferred to the epidemic center Bac Ninh, Bac Giang. High-tech products “make in Vietnam” such as: COVID-19 epidemiological information maps, disinfection robots, self-propelled robots, smart school solutions … or simply splash shields, orezol water These are all feelings of love and sharing from the collective staff, lecturers, scientists and students of Phenikaa University sent to the epidemic center.

Wax coconut, a famous specialty of Tra Vinh province. Photo: MD. The Board of Evaluation and Acceptance of Scientific and Technological Tasks of Tra Vinh Province has just accepted the topic “Design and manufacture of equipment to determine the percentage of wax in coconuts” by Dr. Nguyen Minh Hoa, Tra Vinh University as the chair. Wax coconut is a famous specialty of Tra Vinh province. However, determining the percentage of wax in coconuts has long depended on the experience of gardeners. The use of Deep Learning classification equipment helps gardeners determine the percentage of wax in coconuts with the correct probability of up to 95%, determine the percentage of solid wax and liquid wax with 80% probability, should be graded by the council. rather. Mr. Luu Van Nhan, Deputy Director of the Department of Industry and Trade of Tra Vinh province, said that in the past to choose wax coconuts, gardeners’ experience was to shake, but often not absolutely accurate. Nhan said, while still working in Cau Ke, a delegation of the National Assembly ordered 50 waxed coconuts, he asked a reputable agent to collect them. But after asking, I found out that there are many fruits like normal dried coconut. Council for acceptance of coconut wax measuring equipment. Photo: Minh Dam. “In such cases, I believe the gardener is not intentional but just mistaken. Therefore, determining the percentage of waxy coconuts is extremely meaningful to avoid the fact that a 150,000 VND waxed coconut turns into a coconut. dry 10,000 VND. I find this research very close to the actual situation and has high practical application significance”, Mr. Nhan emphasized. According to Mr. Nhan, when applying this device, large-scale farmers, businesses that buy raw wax coconuts, and trading facilities will have more favorable conditions in business, especially the There is no doubt between the buyer and the seller. Now Mr. Nhan wants to buy 50 waxed coconuts, just put it in the machine will have results, from that result the price negotiation will be very close to reality. But Mr. Quick said that, to move towards commercialization, the research team’s product should be improved as compactly as possible for easy portability. The meter for measuring the percentage of wax in coconuts works at the acceptance test of the research topic. According to Dr. Nguyen Minh Hoa, Vice Rector of Tra Vinh University, the knowledge economy is developing in line with the trend of industrial revolution 4.0, higher education institutions play a more important role to find new knowledge, transmit spread knowledge and apply that knowledge through scientific research activities and technology transfer into practice. At the same time, schools need to update the latest research from these scientific research results and transfer this technology into teaching to students in order to improve training quality. Because this is a measure for schools in applying knowledge to create practical values ​​for life. At Tra Vinh University, it is clear that 3 basic components including training, scientific research, technology transfer are inseparable, the development trend expands over time to meet the requirements of educational innovation. university education. Successful research on cordyceps at Tra Vinh University. Photo: Minh Dam. Dr. Nguyen Minh Hoa shared: “Over the years, Tra Vinh University has promoted applied research and technology transfer activities among lecturers and students. In particular, focus on strongly developing the invention space among students and lecturers – makerspace, developing student research groups – IEEE Student Chapter at Tra Vinh University, developing Lab – invention space for students students, lecturers, student cooperative models, student farmer associations, and policies to encourage the incubation of start-up ideas, applied scientific research and technology transfer to serve the community. “. In the coming time, Tra Vinh University will continue to prioritize the implementation of projects to deploy research products with commercial potential, focusing on investing in strong research directions, prioritizing community service and closely associated with businesses, departments inside and outside the province in ordering scientific research and technology transfer.

BluSaigon is one of the most impressive projects and has successfully raised capital at the TV show Shark Tank – Billion dollar deal. The CEO and founder of this project is Ton Nu Xuan Quyen – the daughter of businessman Ton Thanh Nghia – “tycoon” in the industry of exporting buttons made of shells and pearls. Since 1997, irrigation engineer Ton Thanh Nghia and 6 workers have diligently cut each shell in a loft in Phu Nhuan district, Saigon. That was the time Mr. Nghia started Ton Van button company. Today, each button – Ton Van’s product has become a delicate accessory attached to the fashion outfits of the world’s leading fashion houses Dior, Escada, Ralph Lauren… Entrepreneur Ton Thanh Nghia – founder of Ton Van, button brand Make in Vietnam. In 25 years of starting a business, Mr. Nghia has always been concerned about introducing and giving friends and international partners a true Vietnamese gift. With the available advantages from the processing of snail shells, Mr. Nghia has created unique items from this natural product. He has gradually researched and made pens from seashells, snail shells, and pearls, and it was not until last year that he made a satisfactory product. Products of Ton Van and BluSaigon are made with natural materials such as abalone shells, pearls, and snail shells. Following his father’s wishes, Nghia’s daughter Ton Nu Xuan Quyen was the one who brought those handmade products to the world. These unique items are sold under a new brand, BluSaigon. This is a company specializing in creating unique handicrafts and fine arts products to bring the beauty of Vietnamese handicrafts to the world. Ballpoint pens and fountain pens cost VND 20 million BluSaigon’s products are all handcrafted items, skillfully crafted by hand. They are made based on natural ingredients from all over the world such as New Zealand abalone shell, Australian abalone, Chilean abalone, green turban snail, black pearl, white, yellow, pink pearl, .. ., gold, silver, resin, buffalo horn and high quality ebony. This is the main raw material for this Make in Vietnam company to create high-quality handicrafts and fine arts with high creativity such as ballpoint pens, fountain pens or jewelry such as earrings and necklaces. . The process of making a luxury pen Make in Vietnam. Among these products, the most special are still pens made from pearl shell, lacquer and rustic (wooden case) pens. Depending on the material, BluSaigon’s ballpoint pens are priced from 1.2-3 million VND. With the line of ink pens, the common price of this product line is about 6-7 million VND. In particular, the platinum-plated New Zealand abalone Urushi lacquer ballpoint pen is priced at up to VND 15 million/piece. In addition to high-end pens, BluSaigon also has jewelry product lines such as earrings, necklaces made of abalone shells, pearls with prices from 600,000 – 1.8 million. These Make in Vietnam pens cost millions, even tens of millions of dong. According to CEO and founder Ton Nu Xuan Quyen, the most expensive pen that BluSaigon makes costs up to 20 million VND/piece. Explaining this somewhat luxurious price, she said that each screw on the pen is unique, so all products are different and unique. By making these products BluSaigon will be able to preserve the thousand-year-old Vietnamese art of mosaic. BluSaigon’s 2020 sales are about 3 billion VND, profit is at 20%. The company now has a website, sells through Amazon, Indiegogo and has received quite positive feedback, CEO Ton Nu Xuan Quyen shared. A finished pen costs up to 20 million VND. The world luxury goods market is now worth $400 billion. BluSaigon is following the path of luxury brands like Mont Blanc to bring Vietnamese products to the world. Founder Ton Nu Xuan Quyen’s wish is to turn her products into a national gift of Vietnam. She also hopes that in the future the high-end products of this brand can become a souvenir that we give to our children and grandchildren.

Factory workers Z121 operate on presses MN-1000 designed and manufactured by factory technicians. Achieving the above results is due to the scientific and technological work always receiving the attention and direction of the Party Committee, the factory’s Board of Directors and the close coordination of agencies and units inside and outside the factory. Lieutenant Colonel Le Duc Hanh, Deputy Director of Z121 Factory affirmed: The factory always identifies science and technology as the key, orienting to develop both width and depth, promoting and encouraging officials, technicians and workers. participation, in which technical agencies and staff with professional qualifications and high skills are taken as the core in research and development of science and technology; at the same time, building and perfecting the management mechanism for S&T activities. Along with that, the factory focuses on training and fostering science and technology staff and technical staff. Up to now, 100% of technical staff have university degrees or higher, ensuring mastery of technology and proposing ideas, in charge and in charge of assigned science and technology topics and technical improvement initiatives. The factory assigns grassroots science and technology tasks to collectives and individuals; establish a science and technology research group to coordinate the implementation of the topic, and at the same time associate the tasks of science and technology research with the responsibilities and duties of officials; take the results of scientific and technological work to evaluate the capacity and quality of staff, consider emulation every year… In the period of 2015-2020, the factory deployed and completed 85 scientific and technological projects at all levels, projects and programs to rationalize production; 32 mechanization and automation projects and 1,429 technical innovation initiatives. The factory also cooperates with research institutes to successfully test many products with complex technical requirements to meet the requirements of military modernization. Prominent in the plant’s science and technology work is focusing on implementing topics to completely solve complex technical problems and problems that have lasted for many years. Many high-value initiatives have been put into effective application such as: Researching and perfecting the technology of producing fire particles K51SK; research on drying wet fire seeds by infrared drying method; perfecting the production technology of spark tube explosion to improve product quality, overcome the phenomenon of electric spark tube resistance decline, stabilize quality, and reduce product failure rate; research to improve the quality of bullets PG9, OG9, B41M… In response to the requirements of research and development for defense production, in addition to researching and ensuring the production of traditional fire tools for army weapons, the factory also focused its research force on new types of fire tools for the military. weapons of the air force, navy to put into equipment to replace old and degraded fire tools. The factory also completed mechanization and automation works; design and manufacture equipment for the project of synchronous transfer of the dose line… Thereby affirming the factory’s level, design and manufacturing capacity of highly complex equipment. The above topics are new in technology, successfully researching and manufacturing for the first time on the factory’s existing technological equipment lines, contributing to meeting the requirements of repairing and replacing fire tools used in the factory. for weapons of the air force and navy, saving the budget and actively ensuring technical, improving the combat readiness of the army.

In the current payroll of the Russian Aerospace Forces, there are more than 2000 jet aircraft of all types. However, this force only uses two-engine fighters, does not own any single-engine fighters. One of the main reasons is that most of the fighters in the current Russian Aerospace Forces, most of which are fighters developed from the previous Su-27 series, use two jet engine. However, part of the reason why Russia did not use single-engine fighters in service, came from the lack of it in the final stage when the Soviet Union was about to disintegrate. Specifically with the MiG-29 fighter. This type of fighter, when developed, was aimed at a single-engine fighter design, to compete with the US-made F-16 fighter. However, this design encountered a very difficult obstacle, that is, the Soviet Union at that time did not have a jet engine strong and light enough to be applied to the design of the MiG-29 at that time. . Designer Mikoyan then had to revise the drawings of the MiG-29, forcing it to use two jet engines instead of one as originally envisioned. Basically, at the last stage when the Soviet Union was about to disintegrate, it was very difficult to spend money on research and manufacturing of new generation jet engines. The fighter designers were then forced to use all that was available to them, and the idea of ​​a single-engined Moscow fighter jet ended since. However, it can still be considered that twin-engine fighters have more advantages than single-engine fighters. The US itself at the present time has also stopped producing single-engine fighter aircraft, the F-16 version, although very popular, has only received further upgrades so far, the new production line has been closed. Doors from 2017 to 2019 are allowed to reopen, but only for export. Compared with single-engine fighters, dual-engine combat is considered to be more stable in operation. In the event of one engine failure, at least one remaining engine is enough to bring the plane to a safe landing. Two engines, which means that the aircraft will have two independent power supplies to power the computer system, and also the hydraulic systems on the plane. With single-engine fighters, once the engine stops working, the aircraft will immediately fall into a state of loss of control. Especially with today’s modern aircraft, which use fly-by-wire electronic steering, as soon as the engine is turned off, the computer will also turn off and the steering system will be useless immediately. The American F-16 fighter itself also uses special fuel, along with an electrical energy storage system, allowing the aircraft to operate for an additional 10 minutes after the engine is turned off. At the end of 10 minutes, the energy reserves will run out and the aircraft will also be uncontrollable. In the opposite direction, a single-engine fighter has the advantage of being more compact, lighter, and more fuel-efficient when compared to a twin-engine fighter with the same output thrust. Even the US F-16 fighters, capable of carrying weapons up to 7.7 tons, are only 300 kg inferior to the Russian twin-engine Su-30 aircraft. In the future, Russia is looking to replace its MiG-29 fighters with a single-engine fighter. However, up to now, the design of the new Russian single-engine fighter is likely still on paper. The first thing Moscow needed was a jet engine powerful enough to carry the fighter. Image source: Pinterest. Russia’s MiG-29 fighter is still considered the most “light” fighter that Moscow owns. Source: Mikoyan.

Carry out the opening ceremony of the research room. On May 27 at PTIT, Naver (Korea’s leading technology company) and PTIT held the Launching Ceremony of “International Research Lab on Artificial Intelligence and Multimedia Data”. The ceremony took place in an online form to ensure the health and safety of the delegates. “International Research Laboratory for Artificial Intelligence and Multimedia Data” is the first collaborative project between Naver Corporation and PTIT. With this activity, PTIT will officially join the “Global AI R&D Belt” of Naver and be the second university in Vietnam to receive the core technological knowledge provided by the university. Korean corporation brought. From Korea, CEO of NAVER Group – Mr. Choi In Hyuk said: “Choosing to cooperate with the Academy of Posts and Telecommunications Technology, a non-business unit under the Ministry of Information and Communications of Vietnam, is an important step for Naver in building the Global AI R&D Belt. Together with the cooperation to establish AI Center, we hope to create a leading AI research and training environment in Vietnam. The guests attended the ceremony. NAVER has been taking advantage of diverse opportunities to become an international technology corporation. In the future, Naver will constantly expand its network, bringing together talented people from everywhere to grow together and become global leaders in AI technology.” . Before the Lab was officially launched on May 27, PTIT’s technology experts collaborated with Naver Labs Europe’s team leaders to carry out the first research projects. It is expected that these studies will make a significant contribution to the digitalization process in Vietnam, and at the same time contribute to turning the country of more than 96 million people into a global player in artificial intelligence in the early next decade. . Academy Director – Mr. Vu Van San said: The corporation’s “global AI research and development belt”, along with ongoing research activities at PTIT, the cooperation and sharing of core AI values ​​from Naver will play a significant part in the building the Academy’s “miniature digital nation” and jointly developing and creating high-tech “make in Vietnam””. The main activities of the International Research Department on Artificial Intelligence and Multimedia Data include: Organizing courses for students including training in Embedded, IoT, AI, Big Data, Blockchain, Data; Organize student and faculty exchange programs. Vietnamese students and lecturers will have the opportunity to participate in exchange activities arranged by Naver; Transfer and apply Naver’s strong technologies, products and services; Developing new curricula and international training programs; Grant scholarships to outstanding students in the AI ​​field of PTIT; Conducted a joint research project between Naver and PTIT.

1. Neutrogena Clear Face Break-Out Free Liquid Lotion Sunscreen SPF 50 (270,000 VND): This sunscreen is suitable for acne prone skin. The milky texture makes it easy to spread and absorbs quickly. It provides broad spectrum UVA and UVB protection, while also being non-comedogenic. However, the product may cause mild stinging if applied near the eyes or sensitive skin. Photo: Davinluv, Neutrogena. 2. The Saem Eco Earth Pink Sun Cream (345,000 VND): This is a gentle physical sunscreen, suitable for sensitive skin. Contains pink calamine powder to gently lift skin tone. The product can be used as a makeup base. Photo: The Saem. 3. La Roche-Posay Anthelios Clear Skin SPF 60+ Dry Touch Sunscreen (460,000 VND) For acne-prone skin. Does not clog pores. The product provides a matte, oil-free foundation. The inner ingredient also has silica, perlite (perlite) to help absorb excess oil. Photo: La Roche-Posay.

4. Blue Lizard Australian Sunscreen Sensitive SPF 50+ (460,000 VND/148 ml) is a physical sunscreen with zinc oxide, titanium dioxide that protects the skin from UVA and UVB rays. It contains no irritating ingredients, parabens or fragrances. Photo: Blue Lizard Australian Sunscreen. 5. Bioderma Photoderm MAX Aquafluide SPF 50+ (450,000 VND): The liquid texture provides an easy spread and quick absorption. The product is supplemented with Cellular Bioprotection technology that activates natural defenses, protecting the skin from damage from HV rays. You need to be careful because the product can cause stinging if applied near the eyes. Photo: Romi.fit, Bioderma. 6. Make P:rem UV Defense Me. Blue Ray Sun Fluid (550,000 VND/100 ml): This physical sunscreen is suitable for sensitive, easily irritated skin. In addition to sunscreen ingredients, the product also contains chia seed and centella asiatica extracts to help soothe and reduce skin temperature. You should apply a moderate amount because it is easy to appear white streaks when applying too much. Photo: Make P:rem. 7. EltaMD UV Clear Facial Sunscreen Broad-Spectrum SPF 46 (830,000 VND): Oil-free ingredients help soothe, reduce the phenomenon of dark skin, acne. Zinc oxide and octinoxate sunscreen active ingredients protect skin from UVA and UVB rays. The product provides some additional beneficial ingredients for the skin such as niacinamide, hyaluronic acid, lactic acid. Photo: EltaMD.

The Eurasian Times has just published a graphic image of a single-engine fighter, believed to be of a future design, built by Russia based on the Su-57 fighter, in order to overcome the biggest weakness of this aircraft. , which is the lack of stealth. Accordingly, Sukhoi Corporation has embarked on the design of a new fighter, based on the original design of the Su-57, but enhancing stealth to a new level. Information from the Eurasian Times also said that it is likely that the next design of this new fighter jet will be equipped with only one engine. So far, the Russian Su-57 fighter has always been praised for its excellent maneuverability and speed, but to achieve speed and maneuverability, the Su-57 at the expense of invisibility. Although Russia has never acknowledged it, many military experts believe that the 3D vector engine design on the Su-57 is the fighter’s fatal weakness in front of enemy radars. Unlike the engine design hidden inside the stealth cover of the aircraft like the US F-22 Raptor, the engine of the Su-57 fighter is almost completely exposed. The radar-absorbing shell of the Su-57 fighter does not cover the aircraft’s engine parts, which means that, even though the entire Su-57 is invisible, its engine will still be targeted by enemy radars. side caught. The difficulty of Russia is that the engine of the Su-57 has too good performance, generates a lot of heat and is a 3D vector engine. All of these factors will make the Su-57’s engine impossible to fit inside the aircraft, nor can it be covered with a radar-absorbing shell on the outer surface. The US itself has admitted to trading the maneuverability, as well as the speed of the F-22 Raptor and F-35 fighters in exchange for superior stealth, but with the Su-57 everything is different. does not appear to be going in this direction. In addition, information about Russia’s next 5th generation fighter model will be equipped with an engine, also making many people curious and excited. Since the dissolution of the Soviet Union, Russia has not built any single-engine light fighter. Russia’s lightest fighter today, probably the MiG-29 – is also equipped with two engines, and can be considered a medium fighter. The single-engine fighter, in theory, is not much inferior to the twin-engine fighter in terms of weapon carrying capacity and aerial range. Not to mention, single-engine fighters will have lower production costs, shorter assembly times, and lower usage and depreciation costs. Currently, on the world market, the US F-16 single-engine fighter is still “hegemonic” and has almost no rival. Despite having only one engine, the US F-16 fighter is still capable of carrying up to 7.7 tons of weapons – only 300 kg less than the maximum weapon load of the Su-30. This is currently also the backbone of the US, with 1,300 in service, the most numerous fighter in the world at the moment. The test pilot pushed the Su-57 fighter to the limit of its maneuverability with a series of unbelievable flight maneuvers. Source: Sukoi.

Sukhoi’s Su-57 fighter Associated TASS May 26, citing a source in the Russian military aircraft industry, said the above information Sukhoi is a well-known company in the military aircraft manufacturing industry, especially the Su-family fighters and fighters such as Su-27, Su-30, Su-35 and the latest is the Su-57 stealth fighter. . These aircraft are all 2-engine, similar to the MiG family fighters in the Russian air force such as MiG-29, MiG-35… Source of TASS “The Sukhoi company is developing the first single-engine light tactical aircraft in modern Russian history with a take-off weight of up to 18 tons,” said the statement. According to him, the aircraft can reach a maximum flight speed of more than Mach 2. The fighter is distinguished by its super-maneuverability and improved take-off and landing characteristics due to the impact of the propulsion engine. push vector. In early April, it was reported that the Russian Ministry of Defense had approved the final exterior design of a new type of stealth bomber, also known as the “advanced long-range aviation complex” (PAK DA). ). The PAK DA aircraft is being developed by the Tupolev company with the priority of reducing radar reflections and equipping long-range weapons. Sheet Izvestia news: Several features of the PAK DA have been approved after a series of tests to determine the level of radar signal reflection, aerodynamic test results. “Work on the development of the PAK DA program is at the detailed design stage, construction of several prototypes of a promising bomber is underway,” RIA Novosti quoted a source in the Russian military-industrial complex as saying. The source said that the new bomber will be built according to the “flying wing” aerodynamic scheme, with subsonic speed and long flight time. In addition, it will only use internal weapons, including hypersonic missiles. “It is said that this bomber will be able to control groups of unmanned aerial vehicles and therefore be able to use almost any type of air-to-air missile,” the source said. The new bomber is expected to enter service in 2027. It is expected to replace the Tu-95MS turboprop bombers in the Russian Aerospace Forces. Earlier, it was reported that the Russian Defense Ministry was working on a project to build a special unmanned aerial vehicle (UAV) and a control system for it to be able to engage in anti-submarine warfare. Potential platforms for creating such an apparatus are currently being studied, sources in the Russian Defense Ministry told. Izvestia . In the future, there are plans to use heavy drones equipped with anti-submarine weapons. Several devices combine to form a network that can coordinate the search for the enemy. The drones can be launched from airports or from land. They will be controlled from both aboard and in the air, aided by automation capabilities and artificial intelligence elements. These devices can attack the target independently or in combination with the weapons of other anti-submarine weapons.

Specifically, this map provides epidemiological information, such as: living areas and contact places of patients infected with Covid-19 in 14 days, concentrated isolation points, medical isolation areas and checkpoints. disease control …, help people not move to hot spots, avoid infection. When people have a need to find places where Covid-19 patients have been with the exact time, the system will look up the patient’s epidemiological information. With concentrated isolation points, the warning section will show the time of application, the maximum number of receptions, the number of people in quarantine and the number of people that can receive more. To use this digital map, users only need to access the address https://covidmaps.langson.gov.vn . Digital map of Lang Son province So far, the country has had 9 localities deploying Covid-19 epidemiological information mapping software, including: Da Nang, Bac Giang, Vinh Phuc, Bac Ninh, Quang Ninh, Quang Nam, Gia Lai, and Phu Yen. and Lang Son. Also on May 24, the Military Telecommunications Industry Group (Viettel) completed the installation and integrated connection of 3,000 surveillance cameras in isolated areas in the northern provinces. All image data from the camera is integrated into a centralized management system at the Monitoring Operations Center. The epidemic prevention and control agencies can monitor all activities in isolation areas from the 24-hour management system, minimizing developments that may aggravate the epidemic situation. Before that, right after the Covid-19 epidemic just appeared, Vietnamese technology enterprises were tasked with building software for epidemic prevention and control such as Bluezone, tokhaiyte.vn, NCOVI… In fact, these applications have been applied quite effectively in many localities in the quick tracking of cases. Experience from abroad also proves that the applications contribute effectively in zoning, isolating and stamping out the epidemic. For example, when Covid-19 began to spread in Wuhan (China), this locality applied the Beidou satellite navigation system to monitor freight transport, traffic flow, zoning, and distances. separate people in the city and with neighboring provinces. In particular, China has a system of facial recognition cameras placed everywhere. This system combined with big data, machine learning can analyze the travel schedule, body temperature, number of people in contact, thereby easily partitioning and isolating F1, F2, F3 as soon as F0 is detected.

The group consists of eight first-year students: Chu Minh Nhan, Cao Khanh Gia Hy, Nguyen The Binh, Ho Huynh Gia Bao, Tran Duy Khang, Nguyen Duy, Ngo Ha Gia Bao and Mai Hoang Kim Son. The group made the fabrication under the guidance of three lecturers, Prof. Dr. Quan Thanh Tho (Deputy Dean of Faculty of Computer Science and Engineering), Dr. Le Thanh Long (lecturer of Faculty of Mechanical Engineering) and Dr. Vo Thanh Hang (Deputy Head of Faculty of Computer Science and Engineering). lecturer in the Department of Environment and Natural Resources). A group of students worked hard together to make a thermometer Dr. Vo Thanh Hang (female), Assoc. Prof. Dr. Quan Thanh Tho (shirt) and a group of students next to an automatic body temperature measuring device. Photo: NTCC Chu Minh Nhan, a member of the group, said that the group is currently completing a number of features such as the data entry table, the frame structure… according to the suggestions of the teachers and teachers. It is expected that in the middle or the end of June 2021, the group will complete the apparatus and put it into use at the school’s entrances. Compared with other machines on the market, the advantage of IoT-integrated automatic body temperature and hand washing machine is that it is programmed with IoT to recognize faces (check student IDs and faces) to remind you to wear a mask. voice. The device will automatically measure the body temperature and warn when the body temperature exceeds the normal range. Update data on user information and temperature of use, record information, when the user is using the machine… The machine also supports automatic hand washing with a sufficient amount of antiseptic solution. In particular, the data (temperature measurement results, entrance time, facial recognition images) will be stored and transmitted to the central server. Medical staff will easily access and retrieve data for control and tracing of suspected COVID-19 cases. Dr. Thanh Hang, instructor, said that the thermometer is a product developed by a community project and entered the top 10 of the soft skills class of the school’s international training program. After that, students continued to research and develop machine manufacturing, combined with smart internet usage features, to improve usage efficiency. According to Dr. Thanh Hang, the group has now registered a student scientific research project (start-up program) and manufactured according to the university’s order to use in the prevention of COVID-19 at the University of Science and Technology.

55ZH6M Nebo-M radar station of the Russian military. Photo: Russian Ministry of Defense Yan Noviko, General Director of Almaz-Antey, said at a forum on new technology in Moscow on May 23: “The Nebo-M radar system is the ‘killer’ of stealth technology. Radar can detect F-22, F-35 relatively easily. Mr. Niviko also said that Almaz-Antey is capable of producing about 30 types of mobile multi-purpose radar, thanks to proper investment in research projects as well as new technology. 55ZH6M Nebo-M is the latest Russian radar, designed and manufactured by the Nizhny Novgorod Radio Engineering Research Institute (NNIIRT) of Almaz-Antey. Along with the Container radar, the Nebo-M surveillance station is considered the backbone of the battlefield radar network on Russia’s land borders. So far, 55ZH6M Nebo-M has been deployed in all the most important directions in Russia. The first Nebo-M complex was delivered to the Western Military District in 2017, followed by combat units stationed in Transbaikalia, Khabarovsk and Primorye. A year later, this advanced radar network was deployed in an air defense unit based in Crimea. The portable Nebo-M system can be rapidly redeployed to other locations by land or air. The new Nebo-M series is capable of detecting aircraft and ballistic missiles at a distance of up to 1,000 km, a big step up from the early Nebo radar systems developed under the Soviet Union. This radar station operates on the principle of active electronic scanning, making the 55ZH6M Nebo-M capable of resisting enemy jamming. When specifically installed to track targets at medium altitudes, Nebo-M radios are sometimes equipped with low-altitude radar systems like the Podlet-E. Is it really something to worry about with US stealth fighters? TASS news agency (Russia) quoted Noviko as saying that stealth technology does not cause difficulties for Russia’s new radar complexes. In theory, this is true, because VHF high-frequency radars like the 55ZH6M Nebo-M can identify an F-35 or F-22 in flight. American stealth fighter F-35. Photo: Reuters American experts say that there are many things to confirm in the Russian statement. Identifying a new target is the first step and part of the process of catching and killing the target with many stages. After locating the target, for example the F-35, the requirement for the radar station is to fix the target, track, and “catch” successfully before transferring the parameters to the unit tasked with destroying the target. target. According to General Dan Flattley, a former F-35 pilot of the US Air Force, in order to destroy the F-35, Russia must build a chain of target destruction. This task is usually performed by Russian anti-aircraft missiles, such as the Russian S-400 defense system. Until now, whether the S-400 is capable of destroying the F-35 or F-22 stealth fighters is still a subject of debate. Technically, it is clear that the 55ZH6M Nebo-M watchdog can identify the US 5th generation fighter. But that’s only part of the battle sequence. Locating is one thing, but whether Russian air defense systems can destroy the F-35 and F-22 is another story, because many factors are involved. If “detect” but not have the ability to “precise attack”, the radar’s performance does not make much sense. US stealth technology only needs to overcome the “destroy” limit of Russian missiles to be considered successful.

The MiG-35 is an upgraded product of the MiG-29K/KUB and MiG-29M/M2, which is currently undergoing final testing. “The MiG-35 is in the state-level general testing stage and has already obtained preliminary certification to obtain the certification,” said Musheg Baloyan, Director of the MiG-29M and MiG-35 Aircraft Program at the MiG Aircraft Corporation. can be put into pilot production. Pilots love these planes because they are easy to operate and offer many advantages.” MiG-35 . fighter The MiG-35 is the 4++ generation of aircraft. They are equipped with a series of modern technology, but the fate is extremely bleak. Since its announcement in 2007, the development of the MiG-35 has been relatively slow. Only in 2013, the Russian Air Force announced plans to buy a total of 37 of these aircraft. Up to now, a total of 14 MiG-35s have been produced, of which 6 are in the process of testing and 8 are in the mass standard. Russia remains the sole operator and operator of the MiG-35. MiG-35 . fighter The Russian media must also admit that, although there have been many changes, it is the appearance that is almost unchanged compared to the MiG-29 that makes them lose their attractiveness, besides, despite having an engine with a thrust direction. multi-dimensional, but this RD-33MK engine is really just an improvement from the RD-33 that was born in the early 1970s. On the other hand, the RD-33 was never considered an excellent engine, They are quite fuel efficient and often emit black smoke trails. Previously, even the Russian Ministry of Defense also refused to order this fighter line, many sources also said that Russia was forced to buy MiG-35 to leverage the promotion and export of this aircraft. and most importantly, to save the plane maker Mikoyan from bankruptcy. Perhaps Mikoyan has to do more for the MiG-35 – because this is their only salvation at the moment – for this aircraft to become a ‘hot’ item similar to the Su-35, first of all. is the trust of the Russian air force itself, then the air forces of countries that have traditionally used Russian aircraft.

According to the Moskovsky Komsomolets newspaper, the project to build Russia’s own domestic space station was approved by President Vladimir Putin during a closed-door meeting on the development of the space industry. Work on creating a national orbital station is scheduled to launch in the near future. Experts are faced with the task of building the space object as soon as possible, in order to prevent the long-term absence of Russian cosmonauts in orbit. The publication Moskovsky Komsomolets reminds that the estimated service life of the Russian segment on the International Space Station will end in 2025. After that, the module will be destroyed. The proposal to abandon the ISS was previously announced by the Russian National Space Corporation – Roscosmos. The experts of the above enterprise believe that serious system problems of the orbiting station in operation may begin soon, as its useful life is about to end. According to preliminary estimates, maintaining the Russian segment on the ISS in the coming years will cost 10-15 billion rubles, which is very expensive compared to building a completely new one. The International Space Station has been in use since 1998, its life will end in 2024. Currently, the countries participating in the project are considering options to prolong the existence of the multi-space space research complex. capacity until 2030. In the meantime, it is known that some components for the International Space Station ISS will be utilized by Russia. The first basic module for the future Russian national orbital station could be a component previously designed for the ISS. Experts from RSC Energia are currently working on the Science and Energy module (NEM) and it will be ready for launch in 2025. The head of the Roscosmos Group – Mr. Dmitry Rogozin wrote about this on the Telegram channel of the company. myself. Mr. Rogozin also reiterated that Russia intends to withdraw from the ISS after 2025. By that time, Moscow plans to build its own orbiting station for scientific research purposes. Earlier, Russian Deputy Prime Minister Yuri Borisov said that the situation related to the “aging” of the ISS structure could lead to dire consequences. So Moscow should create an alternative as soon as possible and not put the astronauts at risk. In addition, Borisov also revealed that the future national orbiting station could become “high-orbit” (located above the ISS), which would not only be used for scientific research, but also serve as a “transshipment base” in the mission to conquer the Moon. As for the NEM module, work on its creation began in 2012. According to the plan, by 2015 the device should have ensured energy independence for the Russian subdivision on the ISS. However, at that time only the preliminary design was completed. NEM’s ground tests only really started in 2018. While its launch date has been repeatedly postponed. In the coming time, Russian scientists will certainly have to be more active, because progress is increasingly urgent. In addition to the NEM that will become the main module, according to Dmitry Rogozin, two permanent working modules named Nauca and Prichal may also become part of the Russian space station in the future, both modules will be sent to the ISS in the future. this year.

Industrial design students Minwook Paeng have just come up with a solution to make it easier to use your smartphone while on the road: the Third Eye robot eye. This is an eye-shaped robot that is fixed on the user’s forehead and detects obstacles in front of them when they use their smartphone on the road. This humorous device allows users to navigate while texting or surfing Instagram without worrying about being obstructed by real-world obstacles. This artificial eye has a translucent plastic shell, with internal components based on the open source electronic platform Arduino. It will be applied to your forehead with a thin gel pad. The device is integrated with a speaker and an accelerometer, which is a sensor commonly found on smartphones used to detect the orientation of the phone and automatically rotate the screen when necessary. The device is integrated with a speaker and an accelerometer, which is a sensor commonly found on smartphones used to detect the orientation of the phone and automatically rotate the screen when necessary. The accelerometer on the Third Eye detects when the user’s head is bent to open the plastic eyelid, revealing a sonar sensor. When detecting an obstacle ahead, the eye will emit a buzzing sound to signal the user. The use of mobile phones while crossing the street is increasing and affects public safety on the street. Even the city of Montclair in Southern California (USA) has introduced a law banning pedestrians from using phones or wearing headphones while walking across the street. First-time offenders will be warned, if they repeat the offense for the second time, they will be fined $100 (about 2.2 million VND), if they repeat the offense many times, the fine will be up to $500 (about 11 million VND). A scientific study has confirmed: people who use mobile phones will walk slower and even go sloppy. Due to paying attention to the phone screen so as not to type the wrong content or read the message correctly, the human observation ability will be narrowed, limiting the ability to detect obstacles and not avoid timely. As a result, accidents can happen whenever, for example, hitting other people or crashing into traffic. Please watch the video: Robot make in Vietnam knows how to do math. Source: VTV

Boeing suspends 737 MAX deliveries due to electrical problems. (Source: Rappler) The slow delivery process will affect Boeing’s cash flow, as airlines and customers often pay most of the order value after receiving the goods. The 737 MAX is Boeing’s best-selling plane, but has been grounded for 20 months after two crashes that killed 346 people. Deliveries of the aircraft resumed in November last year, after Boeing updated its flight control system. But now, about 100 737 MAX planes are still “on hold” because of an electrical fault, and it took Boeing longer than anticipated to fix the problem. Ed Pierson, a former Boeing production manager, said the electrical fault should have been discovered during the evaluation of the 737 MAX aircraft after the two crashes. He once “complained” to the US Federal Aviation Administration (FAA) for focusing only on reviewing the flight control system without checking for other problems in the production process. Boeing said it received an order for 25 planes last month, but 17 of the 737 MAX planes were cancelled, leaving the number of planes ordered down to just eight. (according to Rappler)

first. Neutrogena Clear Face Break-Out Free Liquid Lotion Sunscreen SPF 50 (270,000 VND): This sunscreen is suitable for acne prone skin. The milky texture makes it easy to spread and absorbs quickly. It provides broad spectrum UVA and UVB protection, while also being non-comedogenic. However, the product may cause mild stinging if applied near the eyes or sensitive skin. Image: Davinluv, Neutrogena. 2. The Saem Eco Earth Pink Sun Cream (345,000 VND): This is a gentle physical sunscreen, suitable for sensitive skin. Contains pink calamine powder to gently lift skin tone. The product can be used as a makeup base. Image: The Sam. 3. La Roche-Posay Anthelios Clear Skin SPF 60+ Dry Touch Sunscreen (460,000 VND) For acne-prone skin. Does not clog pores. The product provides a matte, oil-free foundation. The inner ingredient also has silica, perlite (perlite) to help absorb excess oil. Image: La Roche-Posay. 4. Blue Lizard Australian Sunscreen Sensitive SPF 50+ (460,000 VND/148 ml) is a physical sunscreen with zinc oxide, titanium dioxide that protects the skin from UVA and UVB rays. It contains no irritating ingredients, parabens or fragrances. Image: Blue Lizard Australian Sunscreen. 5. Bioderma Photoderm MAX Aquafluide SPF 50+ (450,000 VND): The liquid texture provides an easy spread and quick absorption. The product is supplemented with Cellular Bioprotection technology that activates natural defenses, protecting the skin from damage from HV rays. You need to be careful because the product can cause stinging if applied near the eyes. Image: Romi.fit, Bioderma. 6. Make P:rem UV Defense Me. Blue Ray Sun Fluid (550,000 VND/100 ml) : This physical sunscreen is suitable for sensitive, easily irritated skin. In addition to sunscreen ingredients, the product also contains chia seed and centella asiatica extracts to help soothe and reduce the temperature on the skin. You should apply a moderate amount because it is easy to appear white streaks when applying too much. Image: Make P:rem. 7. EltaMD UV Clear Facial Sunscreen Broad-Spectrum SPF 46 (830,000 VND): Oil-free ingredients help soothe, reduce the phenomenon of dark skin, acne. Zinc oxide and octinoxate sunscreen active ingredients protect skin from UVA and UVB rays. The product provides some additional beneficial ingredients for the skin such as niacinamide, hyaluronic acid, lactic acid. Image: EltaMD. 5 habits that make your skin age faster Some daily actions cause wrinkles to appear on the face soon.

Dream of the sky The daughter of a tsarist general, Lydia Zvereva was obsessed with planes from an early age. She read a lot of books about aviation, took complex mechanical toys to pieces, and talked for hours about hot air balloons and airplanes. She even performed “test flights” by jumping from the roof of the storage shed to the ground. “Ever since I was a little girl, I was very interested in the hot air balloons at Osowiec Fortress, so I built models. At that time in Russia no one could fly, and in the press only occasionally began to appear the first information about the achievements of foreign manufacturers,” recalls Lidya Zvereva. Russia’s first female pilot Lydia Zvereva on the plane “Farman-4”. Photo: Karl Bulla/russiainphoto.ru What worries Lydia is certainly not that the early twentieth century aviation industry is still in its infancy, but that flights are very dangerous to life. Flimsy, unreliable planes are prone to capsizing and breaking the wind, claiming the lives of dozens of pilots around the world every year. However, Lydia Zvereva enrolled in the private aviation school “Gamayun” near Saint Petersburg. The local newspaper wrote about the first woman who wanted to learn to be a pilot, calling her “Miss Z” because she wanted to respect her private life. “Lydia Zvereva flew without hesitation and very decisively. I remember everyone paying attention to her masterful flights, including the very high ones. Because at that time, not everyone dared to take the risk of flying to such a high altitude,” said her classmate Konstantin Artseulov. There were a few times when Lydia Zvereva had a serious accident, but always luckily only minor scratches. On August 23, 1911, after passing all the necessary exams, the 21-year-old “Miss Z” was granted a pilot’s license, becoming the first female pilot of the Russian Empire. Talented Aircraft Builder In 1912, Lydia Zvereva, along with her husband, pilot Vladimir Slyusarenko, practiced aerobatics. They attended Aviation Week in Baku, performed in Tiflis (now Tbilisi, Georgia), where female pilots performed flights in difficult weather conditions. The trip to Riga almost became Lydia Zvereva’s last. While flying, the wind started to pick up and threw her “Farman” plane into the stands. She tried to fly up, but she was thrown into the stronger wind, and her plane was eventually overturned. When she fell to the ground, the female pilot was thrown forward and was crushed by aircraft debris. Not long after, in one of her letters, she wrote: “When the plane went down, I almost broke my leg. It still hurts to this day. My lung condition is very bad. The doctor told me not to go anymore, but I still wanted to fly. They warn, if you do not obey, you will get tuberculosis. Indeed, that is the fate of the pilot profession!”. Lydia Zvereva with the first Russian-made aircraft “Kudashev-1”. Documentary photo Despite the accident, perhaps thanks to that, Lydia’s performances were so successful. She and her husband were invited to stay in Riga and they happily accepted. This large city on the Baltic coast was at that time the center of the Russian aviation industry. Here they built the first aircraft engines in the country. In 1913, she and her husband opened their pilot school in Riga with the lowest tuition fees in the country. In addition, they also organized aircraft repair and design classes, at which time Lydia Zvereva was an aircraft builder who upgraded aircraft manufactured in Western countries. This particular woman was invited to work in Austria-Hungary, but she decided to stay in her homeland. Female pilot with no number Teaching and crafting did not make Lydia Zvereva more cautious. This first Russian female pilot is still actively flying as before, even though it is very dangerous to her life. She even had the courage to participate in the “death” twist when sitting on the plane. That flight took place on May 19, 1914 in a monoplane “Moran” piloted by experienced male pilot Evgeny Shpitsberg. The newspaper “Riga Messenger” wrote: “The “Moran” quickly soared into the air. 500, 600 then 700 meters. At an altitude of 800 meters, the plane suddenly stopped in the air and then dived. Almost simultaneously, the spectators gathered below all fled. But after a few seconds, there was a rumble of the engine, the plane soared high and then took a sharp turn. The crowd held their breath with applause. After a while, the plane flew along a beautiful spiral and then landed in the grandstand area. “Hooray! Hooray!” – everyone chanted.” Lydia Zvereva’s admirer is the male pilot Pyotr Nesterov, the first person in the world to perform this complex flight. At the outbreak of World War I, the couple’s pilot school was evacuated to the city of Petrograd (now Saint Petersburg). In fact, this school has become a manufacturing workshop, where 300 employees carry out orders from the Ministry of Defense. Fate did not allow Lydia Zvereva to live until the end of World War I. Many times she escaped death while flying, but she died of typhoid on June 16, 1916 at the age of 26. The female pilot’s friends and students saw her off to her final resting place by flying around in “Farmans” over Alexander Nevsky Monastery in Petrograd.

Wiibike electric bicycles can quickly turn an ordinary bicycle into an electric bike by installing a kit made by the company itself. In the recent broadcast of “Silver billion deal”, the Wiibike electric bicycle project brought by CEO Nguyen Thi Thu Hang has received the investment of Shark Phu with 1.5 billion VND for 10% of the stock. part. And committed if the payback this year will increase the investment by 10 times. Wiibike is a science and technology startup in the green transport sector with the main product of complete electric bicycle, using lithium batteries. Notably, Wiibike’s chassis is made from a variety of materials, including one that uses bamboo, an environmentally friendly renewable material. In addition, Wiibike also offers a Wiibike kit to turn a regular bike into an electric power bike within 15 minutes. According to Mr. Lai Thai Phong – product development specialist of Wiibike, these are Make in Vietnam kits manufactured by the company. This kit comes with a sizing mechanism that can be mounted on any bike, including models with different wheel sizes. “The most important thing about the kit is how the battery is in it. To achieve high performance, the kit must use high capacity cells and good connectivity. This idea is researched and learned from technologies available in the world. ”, Mr. Phong shared. However, this enterprise is only in the consulting process to register for invention copyrights. The Wiibike electric power bicycle project received an investment of 1.5 billion VND for a 10% stake from Shark Phu According to Ms. Nguyen Thi Thu Hang – co-founder and operator of Wiibike, this start-up has a trial product since 2017. Currently, Wiibike is at 51% gross profit with revenue of 2.3 billion VND in 9 months, starting from July last year. “Although not yet implemented any traditional promotional campaigns, the project has attracted 300 customers to buy this car”, the project’s CEO shared. However, according to Shark Hung, this is not a new business model, it is difficult to approve that this is an invention that only stops at industrial designs or useful solutions. Vehicle design is not beautiful, does not show style, the numbers are not convincing. Therefore, the “real estate shark” has decided to ignore this deal. However, CEO Nguyen Thi Thu Hang maintains her stance when asserting that what she does will contribute to the value and make a great impact on the lifestyle and living environment of the Vietnamese people. Whether or not the capital is successfully raised, Thu Hang affirms that she will continue to fulfill this dream. “Wiibike’s orientation is not only at the product, but also to offer green transport solutions to really contribute to the transport system in Vietnam”, said founder of Wiibike. Finally, this start-up successfully raised capital from Shark Phu with an investment of 1.5 billion VND for a 10% stake.

Japan has outlined a plan to conduct tests on the new missile by 2026 and is expected to have the first full launch by 2030. H-2A boosters at Tanegashima Space Center It is known that the country intends to use the same technology as the technology that SpaceX applies to the Falcon 9 rocket. That is the first landing technology of the rocket on the floating floor. Since the early 2000s, Japan has used H-2A boosters. The cost per launch is about 91 million USD, much more expensive than other similar devices in the world. The Japan Aerospace Research and Development Agency (JAXA) plans to make the first launch of the new H-III missile before the spring of 2022. However, according to calculations, the operation of the new equipment will only cost about half the cost of the H-2A boosters. At the same time, Japan will continue to reduce operating costs in order to compete in the market, emphasized Yomiuri newspaper. The newspaper also said that, in addition to first floor reuse technology, Japan is expected to apply the achievements of private manufacturers to produce the next generation of missiles with the aim of further lowering prices. device.

The Boeing 737 MAX plane is about to land in a test flight in Seattle, Washington state, USA on June 29, 2020. Photo: AFP / VNA On May 11, Boeing said it delivered 17 planes in April, including four 737 MAX planes. Boeing CEO David Calhoun has warned that the number of aircraft delivered in April has been affected due to the aforementioned 737 MAX problem. The slow handover process will affect Boeing’s cash flow, as airlines and other customers typically pay a large portion of the value of their orders upon receipt. The 737 MAX is Boeing’s best-selling aircraft, but was banned for 20 months after two plane crashes that killed 346 people. Handover operations resumed last November after Boeing updated its flight control system. But now, about 100 737 MAX planes are waiting for an electrical fault, and it takes Boeing longer than expected to fix the problem. Ed Pierson, a former Boeing manufacturing manager, said the aforementioned electrical error should have been discovered during the assessment of the 737 MAX after two crashes. He has “complained” for the Federal Aviation Administration (FAA) for focusing only on the flight control system without examining problems in the production process. Boeing said it had received an order for 25 planes last month, but that 17 737 MAX planes were canceled, leaving the number of aircraft ordered to only eight.

Illustration. (Source: space.com) According to the Vietnam News Agency reporter in Tokyo, Japan in 2030 will launch a rocket with propulsion recycled from engines used in previous missions, in order to reduce costs rocket launch . Kyodo news agency citing unnamed sources said that a panel of experts from the Ministry of Education, Culture, Sports, Science and Technology of Japan (MEXT) is expected to put the goal of building the missile. be equipped with recycled propulsion in an interim report drafted on May 12. The current, rocket launch costs Japan’s H2A is very expensive because the rocket propulsion will be disposed of after the missile is launched. Even the H3 – the country’s next-generation missile and expected to be launched by the end of March 2022 – is disposable. Meanwhile, the Falcon 9 missile developed by the American Space Exploration Corporation, can reuse parts that have been used in previous missions to bring astronauts, including Japanese astronaut Akihiko Hoshide, boarded the International Space Station (ISS) last month. Since the propulsion of the Falcon 9 rocket is about 10 times reusable, the cost of launching the missile is only about 6 billion yen ($ 55 million), half of the launch cost. H2A rockets Japanese. So the Japan Aerospace Research and Development Agency (JAXA) is conducting research on how to launch a small test missile to a height of about 100 meters and then land vertically in an attempt. missile reuse force. In addition, JAXA also plans to test reusable missiles on a large scale, possibly with France and Germany in 2022./.

Admire the giant super yacht moving through a narrow canal in the Netherlands Producing a large yacht is a process, but transporting it is an art. We do not always have the opportunity to admire super yachts in real life, especially with massive super yacht models. Especially when a super yacht weaving through a narrow canal is a very rare thing in the world. Yacht photographer Tom van Oossanen captured very interesting scenes when Project 817, a large yacht built by Dutch shipbuilder Feadship, was transported from the Kaag Island facility to the Sea. North at the port of Rotterdam last week. In the series of images released by Tom van Oossanen, Project 87, one of the biggest super yachts to be launched this year is being transported through the blocks of houses and churches, making the crowd admire. According to Oossanen, about 4 to 6 super yachts are transported along the route each year before being taken for sea trials. However, there are few “big” projects like Project 817, likely to be named Viva when it officially launches. During the two days following Project 817’s journey closely, Oossanen said some of the people present were puzzled by the sight, and asked questions such as “Why did someone drive a yacht? here?” According to Oossanen, each yacht is transported on a similar route, but no yacht is the same. Therefore, he always wants to find new ways to bring new experiences to viewers. “It’s always a route, but I’m always trying to find different perspectives.” The photographer wants to document this journey, as he believes this may be the last time such a large yacht has been transported along the canal. In the early stages of the transport, Viva was moved from the shipyard on the island of Kaag to Lake Braassemermeer, where it would be fitted with cotton underneath to aid yachts floating in shallow water. The two push-and-pull ships are then attached to cardboard in the front and rear of the yacht to aid in the correct direction. By this point, it was ready to be pushed and pulled along the canals, across a small bridge in the village of Woubrugge and the town of Alphen aan den Rijn before reaching the city of Gouda located south of Amsterdam. According to Feadship, a team of 5 experts and a crew on board will be responsible for bringing the yacht to sea. The Feadship confirmed to CNN that the yacht was successfully transported to Rotterdam and is ready for sea trials. Designed by Azure Yacht Design & Naval Architecture and De Voogt, the hybrid Viva-powered yacht with a pearl white exterior color is one of the biggest super yachts at the moment.

IBM’s 2 nm chip had a density of 333 million transistors per square millimeter. By comparison, TSMC’s most advanced chip with a 5 nm process has about 173 million transistors, while Samsung’s 5 nm chip is 127 transistors per square millimeter. Billions of transistors are found on each microprocessor, and the size of the transistor is measured in nanometers. The smaller the size, the more transistors the processor can hold, making it faster and more energy efficient. IBM successfully built a chip with a size of only 2 nm but the most powerful in the world. Most of the processor chips found on personal computers or smartphones today are manufactured using a 7 nm or 10 nm process. For example, the 7-nm Apple A13 Bionic chip has 8.5 billion transistors. Meanwhile, the A14 Bionic microprocessor manufactured on a 5 nm process is integrated with 11.8 billion transistors. More transistors on a chip give manufacturers more options to deliver core innovations, to improve performance for leading tasks like AI and cloud computing, and pave the way for security. Cryptography and encryption are hardware-enforced. The need to increase performance and save energy in every processor has never cooled, especially in the era of the cloud, AI and IoT. The 2 nm chip technology is estimated to achieve 45% higher efficiency, 75% lower energy use than the advanced 7nm chips currently on the market.

Again, Russia intends to withdraw from the ISS project after 2025. By then, Moscow plans to build its own orbital station for the purposes of scientific research. Previously, Deputy Prime Minister of the Russian Federation – Mr. Yuri Borisov said that the situation related to the “aging” of the ISS structure could lead to dire consequences. So Russia should create an alternative to the current project as soon as possible and not leave the astronauts at risk. In addition, Borisov added that the national orbital station in the future could become “high orbit” (located above the ISS), not only used for scientific research but also acting as a “transit base” in the mission to conquer the Moon. Russia will use the ISS international space station’s energy supply module for its future space facility As for the Science and Energy module, work on creating it started in 2012. As planned, by 2015 the device is expected to ensure energy independence for the Russian subdivision on the ISS. . However at that time only the draft design of the device was ready. NEM’s ground tests only really begin in 2018. While its launch is being delayed, Russian scientists will have to be more active in the near future as time is on. increasingly hurry. It should be noted that in addition to the NEM that will become the main module, according to Dmitry Rogozin, two permanent working modules named “Nauca” and “Prichal” could become part of the space station in the future, both modules will sent to the ISS this year.

Journalists of Science and Technology Journalists’ Club visited Viettel High Tech Industry Corporation. Lt. Col. Nguyen Cuong Hoang, Deputy General Director of Viettel High-Tech Industry Corporation, said that VHT operates in three main areas: military technology, telecommunications technology and civil equipment. As the main unit of Viettel in the field of research and development, up to now, VHT has had 276 industrial property registration applications, of which in 2020, 48 core technologies have been completed. product, registered and accepted 66 patent application. The VHT has been granted four new international patents by the US Patent and Trademark Administration (USPTO). In addition, VHT is also granted 19 domestic patents, 5 utility solutions and 7 exclusive design rights, 25 articles are published and presented in prestigious domestic scientific journals and conferences and international. Protection of intellectual property by registering national and international patents is an important basis for VHT to own core technology, ready to integrate into the world, fully competitive. with international corporations, affirming Viettel’s leading position in research and development of “Make in Vietnam” products. In addition, VHT always goes hand in hand with the Government in promoting and developing intellectual property mechanisms. Mr. Phan Thanh Hai, Director of the Appraisal Center, Department of Intellectual Property – Ministry of Science and Technology, said that in the last 5 years, the number of patent applications of Viettel has grown continuously. The fact that Viettel has 4 US patents is of great significance in asserting the technological capacity and the development orientation of market expansion of Vietnamese enterprises.

Increase Armata. “With AI, Russia has created the world’s leading heavy and real robotic tanks. Armata can analyze the situation on the battlefield by himself to attack the most valuable target. After analysis, the vehicle has. can be fired automatically without the intervention of the crew or control center. What is special is that despite the integrated automatic operation, all the power and combat capabilities on the original Armata tank remain the same, “said General Manager Sergei Chemezov. According to the Russian general manager, the new Armata with standards on technical characteristics – tactics, loading system, cockpit structure and support equipment for firing control new. Armata will be equipped with a fully automated combat module that allows the turret to be used differently from traditional tanks. Meanwhile, Deputy Director of Tractor Plants Group (the unit assigned to design Armata), Mr. Mikhail Levshunov confirmed, Armata tanks will be equipped with an automated system that can automatically destroy the target. Select and it will shoot itself until the target is destroyed. He said that the remote control module research was conducted in the framework of research and manufacture of new army technical equipment models. Accordingly, the automatic system can destroy targets in the air and on land. Thanks to the heat detector, it can work all night, when it’s rainy and foggy. Especially while Russia is very confident about the combat strength of the Armata tank, the leading American magazine National Interest pointed out the backwardness of the artillery on both these tanks and the artillery of this tank. the tank front armor of modern Western tanks could not be penetrated. According to an analysis by American magazine, the main reason to say the 2А82 cannon of the Т-14 Armata is outdated is that it uses the same 125 mm size as the previous generation tank cannon. According to some sources, the artillery system was originally built to be fitted with modernized Т-90 tanks that were only intended for the Russian army. After that, with the development of the standard heavy chain chassis Armata, it was decided to equip the next generation tank. The barrel 2А82 is treated to increase elasticity and partially chromed, which greatly increases the durability of the cannon. This cannon can fire existing and future ammo types. Future ammo types could destroy not only existing tanks but also their future variants, as well as new tanks in development. Currently, Russia is testing advanced smart artillery shells for the Т-14, so the ability to destroy enemy tanks is even higher. Although the West underestimated, but the tank manufacturer Armata asserted, the barrel energy of the gun 2А82 is 1.17 times higher than that of NATO’s best cannon, the 120 mm L-55 gun. The Russian artillery is superior to all current tank guns 1,2-1,25 times in terms of technical level and penetrating ability.

The shortage of chips is the biggest challenge that this business is facing, Griffiths said. Volkswagen logo at a dealership of this company in Hamm, Germany. (Photo: AFP / VNA) Seat’s Martorell factory, located on the outskirts of Barcelona, ​​only makes models that receive chips from suppliers, Griffiths said. Volkswagen expects chip supplies to remain tight in the coming months. Last month, Volkswagen Chief Executive Officer Herbert Diess said it was unable to produce 100,000 cars due to a shortage of chips and it would be difficult to make up for the shortage in 2021. According to Volkswagen, the shortage of chips is exacerbated by a snowstorm in Texas (USA), and major chip manufacturers based in the region have to stop production or reduce production. Therefore, this company cannot rule out the possibility of further adjustments to production activities.

Visitors to Lumi Smart Home Experts point out that the Smart Home penetration rate in Vietnam by the end of 2021 has not reached 5%. This is a relatively modest rate compared to the stormy growth rate of Science and Technology. To contribute to the growth in the proportion of families using Smart home, the role of businesses operating in the IoT field – smart home is extremely important. Recognizing this, Lumi Vietnam has closely linked the goal of developing Smart home industry in general in Vietnam with the goal of sustainable development of the business. Therefore, during the past years, Lumi has focused on each specific market, in order to bring Smart Home to more deeply reach Vietnamese people. Some products Lumi Smart Home Ecosystem Talking about the campaign to bring Smart home to each city at the provincial level, Mr. Nguyen Duc Tai – CEO of Lumi Smart House said: “The goal of Lumi is to have at least 1 smart device in every Vietnamese house. Vietnam”. Technology about connected homes is no longer a utopia. It has been present in our lives, researched and manufactured by the hands and minds of the Vietnamese. We should be proud of that and be open to reaching out and understanding. We define the introduction of smart technology to each city and locality as a key goal in this year 2021, so that more and more Vietnamese people have the opportunity to use Smart Home even more … ” It is known that Lumi Vietnam Joint Stock Company is a leader in the field of Smart Home – IoT, has affirmed its research and application capacity with a series of quality achievements that are verified by evidence. domestic and international only.

Build a new generation of social media “make in Vietnam” that is responsible for users At the meeting of State management in the first quarter of 2021 of the Ministry of Information and Communications, Minister Nguyen Manh Hung emphasized that from 2021 onwards, the Ministry of Information and Communications will announce “big problems” to the society. in order to call on agencies and businesses to join hands, contribute together to come up with solutions. On this occasion, the Minister of Information and Communications gave three problems for Vietnamese technology enterprises to come up with a “make in Vietnam” solution. Firstly, building a new generation social network (MXH): from a centralized data model to a distributed model, moving towards users who own their own data instead of all user data belonging to the network operator. Social networks are smaller, more customer oriented, and even charge fees; The platform addresses a social need and then becomes social media. MXH audio, voice communication; MXH ensures information security for users; Business social network for internal communication; publicity of the algorithm; MXH is social infrastructure, so it must be clean, responsible for users and to the society; MXH is the foundation, so it is necessary to share the value with users… These are the new features and features of the social network to replace the first generation. “This is an opportunity for Vietnamese businesses to develop new generation social networks” – The Minister stated. Second, the need to build a new generation of search engine, aiming to ask a question that will have a reliable, usable answer instead of asking a question with millions of answers without knowing reliability. Besides, there is a phenomenon of people paying high advertising fees, the answer will appear first, so knowledge has been corrupted by money. Therefore, the new search engine must aim to communicate with the search engine through voice, which will be friendlier and closer to the user. Third, aiming to build personal museums in the digital environment and towards an immortal digital version that can interact with living people. The year 2021 is the first year the TT-TT industry implements the National Strategy of Digital Transformation (CDS) with the aim of leading the country. Accordingly, Minister Nguyen Manh Hung requires excellent strategy to lead, have breakthrough vision and solutions. In particular, the digital infrastructure strategy focuses on 5G and cloud, technology and infrastructure provided in the form of services, as a number of essential platforms, with a smartphone per person, per household. The family has a fiber-optic internet connection and HTS Vietnam must be in the top 30 in the world by 2025.

Designer Adrian Anh Tuan (white vest) is selected to open Vietnam International Fashion Week Spring – Summer 2021 AVIFW will return from May 27 to 30 in Ho Chi Minh City with the message Make A Change – Make a Change. Entering the 12th organizing season, AVIFW increasingly proves its prestige and quality, not only becoming a place to honor the unique designs of domestic and international designers but also a meaningful cultural meeting point. , helping to raise the position of Vietnamese fashion on the world fashion map. The program is rated as the largest fashion week in Vietnam and Southeast Asia, ranked 4th in Asia – after fashion weeks in Tokyo, Seoul, and Shanghai. AVIFW’s impressive performance Designer Adrian Anh Tuan participated in the last four seasons with hundreds of impressive designs. He used to hold an important closing position on the closing night of AVIFW 2019 and AVIFW 2020 programs. He is also known as one of the designers who not only has design thinking, but also is very successful in building. image and personal brand business. During the nearly 15 years of fashion career, designer Adrian Anh Tuan has released nearly 100 BSTs, performed at domestic and foreign fashion shows. A lot of BSTs leave an indelible mark like BST Peach, Yen, Dreamer, Butterfly Effect … Designer Adrian Anh Tuan released the “Butterfly Effect” collection Model casting for AVIFW 2021 will take place in Ho Chi Minh City on April 25 with the participation of designer Adrian Anh Tuan, supermodel Huong Ly, supermodel Thuy Duong, runner-up The Face Vietnam Quynh Anh. The list of brands and designers participating in this year’s collection will be announced on the next 4-5.

Russian aircraft maker Mikoyan recently said it is developing a new generation of intelligent target recognition system for MiG-series fighters, including the MiG-35. The new system will be able to target not only when the object is completely discovered, but even a small amount of exposure. “Work is underway to create an automated landing assistance system, along with an accurate target recognition complex thanks to neural circuit-based artificial intelligence,” said the company representative. . Mikoyan has repeatedly talked about the possibility that the MiG-35 will receive a steering assistance system with artificial intelligence elements. The MiG-35 is Russia’s latest generation 4 ++ multipurpose fighter, it is an upgrade from the MiG-29 with the integration of many applied technologies on the 5th generation fighter. The aircraft has an empty weight of about 24,500 kg, the largest weapon payload is 6.5 tons. The speed of 2,100 km / h, the maximum thrust of the engine reaches 18,000 kgf. Actual ceiling is announced about 16,000 m, a range of 3,000 km. MiG-35 has 9 external suspension points and a 30 mm cannon integrated in the body, armament includes air-to-air missiles at various ranges, air-to-ground missiles, guided aviation bombs, Uncontrolled rockets and free-fall bombs. Currently, the Russian Air Force has officially received six MiG-35S fighters belonging to the first mass production batch. Under the state procurement program of weapons, by 2027, the manufacturer will hand over a total of 24 MiG-35S fighters. The official operation of the MiG-35S by the Russian Aerospace Forces will open up export opportunities for this fighter, because many customers, though showing interest, are not ready to order because reliability concerns have not been verified. After integrating additional artificial intelligence, MiG-35 can make customers more bold in “opening the purse” when its reliability has increased significantly. But in the opposite direction, there are also many comments that Russia’s claim is very suspicious, because this technology is still foreign to them, and Moscow is also significantly behind the US and the West. MiG-35, Su-57 or many other Russian weapons, although advertised very “monumental”, but in fact so far they have not perfected the features as designed, or have not been proved in operation. . In addition, Russia is also known for its “way” to sell weapons with incomplete features to “ask” for a perfect partner, which is reflected in the fact that the MiG-35 has been sold in India for decades now on. Therefore, perhaps the manufacturer must deploy new technologies on the aircraft serving the Russian Air Force and have a good performance on the battlefield, for example in Syria, the export prospects of MiG- 35 is really bright

Super typhoon Surigae shot from Japanese satellite Himawari 8 at 8am on April 18. The strongest wind of a super typhoon reaches level 17 (200-220 km / h), jerking above level 17. Himawari 8 satellite recorded super typhoon activity in the last 4 hours. Himawari 8 is a Geostatic Weather Satellite (single-position fixed observation) operated by the Japan Meteorological Agency (JMA). This satellite, built by Mitsubishi Electric with the assistance of Boeing, was launched into orbit on October 7, 2014 with a cost of manufacturing about 800 million USD. Users can track images from satellite Himawari 8 via website himawari8.nict.go.jp. It is expected that by the evening of April 18, the super typhoon center is about 380 km east of the central coast of the Philippines. Wind power is unchanged from before. Super storm images updated live on website zoom.earth. This page synthesizes images from Himawari 8 satellite, X GOES data and Meteosat satellite chain. Super storm image at 8:20 am April 18. It is forecast that by the evening of April 19, the super typhoon center is about 280 km southeast of the central coast of the Philippines. The wind power now drops to level 16, recoil above level 17. The direction of super typhoon Surigae on windy.com. Users can download the application on the smartphone to monitor live weather, storms, if any. Image from satellite SAT24 shows the super typhoon about 400 km from the central Philippines. This is the first super typhoon this year to form in the Pacific Northwest. Experts say that even without going to the mainland, the super typhoon appeared in the area at this time is quite early.

PAK DA designs developed by Tupolev Office of Russia. Photo: Ministry of Defense of Russia In early April, the Russian Ministry of Defense approved the final design for the sixth-generation stealth bomber, called the “Modern Long Range Aviation Complex” (identified as in Russian is PAK DA). This aircraft designed and developed by the Tupolev Office places priority on stealth and long-range weapon use. Currently, the office is building a full-size, full-scale PAK DA prototype aircraft. PAK DA is designed based on the aerodynamic principle of “flying wings”, without the tail part, the fuel tank is separated from the wing, can reach subsonic speeds of 1,190 km / h. The PAK DA is expected to replace the Tu-160 strategic bomber developed in the Soviet era. The new Russian aircraft model uses the latest stealth technology, alloys and synthetic materials. The main weapon system equipped on the PAK DA includes long-range cruise missiles and supersonic missiles using modern technology, capable of escaping enemy radar. According to a professor at the Russian Military Science Academy Vadim Kozulin, all the equipment on board is automated at the highest level. Engineers are testing operating the PAK DA in unmanned mode. In addition, this latest generation Russian bomber is said to have the control feature of other groups of unmanned aircraft (UAVs). The highlight of the PAK DA design is the priority in stealth technology, combined with the tactic of using long-range weapons. “The Russian Air Force is currently armed with long-range missiles such as the X-555 and X-101 with a range of up to 5,000 km, which is why there is no need to use traditional long-range bombers. can carry out attacks without leaving the Russian border, still within the defense of the air defense system, “said Mr. Kozulin. The PAK DA is expected to enter service in the Russian army by 2027. The minimum lifespan of this strategic bomber is not less than 12 years. After technical maintenance, can increase the operating life up to 21 years.

Deputy Minister of Information and Communication – Nguyen Huy Dung. Photo: Hang Tran / BNEWS / TTXVN The eMeeting online meeting platform was officially introduced at the Vietnam Digital Challenge Forum “organized by the Ministry of Information and Communications. According to Deputy Minister of Information and Communication – Nguyen Huy Dung, the launch of eMeeting online meeting platform is a strong affirmation that Vietnamese businesses will not give up, and dare to take challenges to thirst. Make in Viet Nam hope comes true. In the market of online meeting platforms in Vietnam, the presence of big names such as Zoom, Microsoft Teams has not deterred, discouraged online meeting solutions owned by Vietnamese enterprises and operate. Currently, eMeeting is being deployed in the National Assembly, the legislature of Vietnam, in many ministries, departments, and businesses. eMeeting is designed with up to 9 layers of security protection. Photo: Hang Tran / BNEWS / TTXVN eMeeting is developed by the cooperation between AIC Group and Bkav Group, equipped with 9-layer security system, optimized data compression, online meeting support with up to 200 bridge points, providing quality Sound volume, good picture even in weak network conditions. Mr. Vu Ngoc Son, Vice President of BKAV Technology Group, said that eMeeting has all the necessary features of the meeting such as scheduling, reminding calendar, document sharing, screen sharing, online video sharing. , manage, administer the meeting, vote … With the advantage of being a network security company, eMeeting is designed with protection system up to 9 layers of security, including protection of transmission channels; firewall; terminal protection; endpoint encryption; archive encryption; database encryption; application security; device security and user authentication. With this security system, customers can be completely assured to use them, without having to worry about unsecurity issues when meeting online such as revealing meeting content or strangers entering the meeting room like some. Foreign solution has encountered ./.

Known for its excellent build quality, exemplary technical prowess and service, there are plenty of good reasons to be able to list the best Dutch yachts. Feadship Halo : The epitome of contemporary style, this 57-meter-long Feadship Halo yacht was built with the spirit of world travel and has an unmistakable futuristic design. The superstructure divided by two large silver roofs, a large sun deck, outdoor cinema and the largest jacuzzi are the attractions of this yacht. Halo can accommodate up to 12 guests for 6 cabins in addition to 12 crew members. Feadship Moon Sand : This 44.2 m yacht has the outdoor space of a yacht longer than 10 m, equipped with an upstream swimming pool hidden in the back. With just the push of a button, a large portion of the front deck of the seating area lowers to reveal a swimming pool behind the main deck. Moon Sand can accommodate 8 guests divided equally among 4 cabins next to the 9 crew members. Its speed reached 12 knots. Oceanco Sunrays : Produced by famous Dutch brand Oceanco according to Bjorn Johansson’s design and interior provided by Terence Disdale, every detail of the 85 m Sunrays yacht exudes luxury. There is a sumptuous spa, helipad, sun deck with hot tub and main deck swimming pool, making it suitable for boat owners with high leisure needs. Sunrays can accommodate 22 guests in 9 cabins. Heesen Her Destiny : Sports yacht built by Heesen is made of all-aluminum with a top speed of 30 knots, but this also does not affect the quietness inside the yacht. The for sale yacht features an exterior design by Omega Architects and during a 2016 refurbishment its interior was completely refurbished by Laura Pomponi. It can accommodate up to 12 guests for 5 cabins. Amel Deja too : Coming from the classic Tigre d’Or line, the 52-meter sports yacht was built in collaboration between Amel Yachts of the Damen shipyard train and Terence Disdale Design. Deja too can reach a top speed of 16 knots, cruise speed 14 knots. Holds up to 12 guests and 13 crew members.

Deputy Minister Nguyen Huy Dung told Vietnamese technology businesses to create their own big dream. (Photo: PV / Vietnam +) At the “Vietnam Digital Technology Challenge Forum” held on the morning of April 16, Deputy Minister of Information and Communications Nguyen Huy Dung had enthusiastic messages to the Vietnamese technology business community. According to Mr. Dung, big goals and big ambitions always stem from aspirations: “An individual’s dream of changing life may need the aspirations of a family. Big goals change the destiny of an entire land. Water will need the aspirations of an entire nation – Digital transformation, digital government development, digital economy, digital society, is such a goal. ” According to Mr. Dung, aspiration will need to go through a challenge to become a big enough one. The more challenges there are, the more proving that desire is true, because it is a desire made up of real pain. Evidence on Online meeting platform eMeeting of AIC and BKAV Launched at the forum, Mr. Dung said that this is a product with many aspirations. It is the desire to master technology, surpassing the shadow of the technology giants in the world. There has been much concern about the solutions at home meeting online Make in Vietnam compared to Zoom, Microsoft Team, … “The launch of eMeeting today is a strong affirmation that Vietnamese businesses will not give up, and dare to take the challenges to make Make in Vietnam aspirations come true. For real opportunities. only to those who dare to take on new challenges, “said Deputy Minister Nguyen Huy Dung. Mr. Dung also called on Vietnamese enterprises, especially digital technology businesses, to create their own big dreams and big thoughts to change their own future, destiny and of the nation. Because, “if businesses do not build their own dreams, others will hire you to build their dreams” ./. Mr. Vu Ngoc Son, Vice President of BKAV introduced the meeting mode of eMeeting. (Photo: PV / Vietnam +) What’s special about eMeeting? eMeeting is developed by the cooperation between AIC Group and Bkav Group. The platform is equipped with 9-layer security system, optimized data compression, supports online meetings with up to 200 bridge points, providing good sound and image quality even under weak network conditions. . This platform integrates “all in one” with all the necessary meeting features such as scheduling, calendar reminder, document sharing, screen sharing, online video sharing, management and administration. meeting, voting … In particular, the eMeeting development team has integrated conference mode, which is only available in solutions using foreign specialized multi-point MCU management equipment, complicated and expensive deployment.

Representative of BKAV introduces eMeeting Platform. eMeeting is developed by BKAV Joint Stock Company and International Progress Joint Stock Company (AIC), equipped with 9-layer security system, optimized data compression, online meeting support up to 200 the demand point, providing good audio and video quality even under weak network conditions. eMeeting has all the necessary features of the meeting such as scheduling, calendar reminder, document sharing, screen sharing, online video sharing, meeting management, meeting management, voting … Introducing specifically about the application, Mr. Vu Ngoc Son, Vice Chairman of BKAV’s Board of Directors said, with the advantage of being a network security company, eMeeting is designed with a protection system of up to 9 layers of security, Including: Protection of transmission channels; firewall; terminal protection; endpoint encryption; archive encryption; database encryption; application security; device security and user authentication. With this security system, customers can use peace of mind without having to worry about insecurity issues when meeting online, such as revealing meeting content or strangers entering the meeting room … Speaking at the launching ceremony, Deputy Minister of Information and Communications Nguyen Huy Dung said, in the context of many concerns about the disadvantage at home of online meeting solutions “Make in Vietnam” compared to In foreign online meeting applications such as Zoom, Microsoft Team …, the eMeeting platform of AIC and BKAV introduced today is a product that brings the aspiration of mastering technology to overcome the shadow of the men. large technology in the world. “The launch of eMeeting today is not only a strong affirmation that Vietnamese businesses will not give up, but also dare to take on challenges so that the aspiration of” Make in Vietnam “will come true. The only way to someone who dares to accept new challenges, if you do not dare to take risks with unusual things, you will forever be buried with ordinary things “, Mr. Nguyen Huy Dung emphasized. At the same time, the Deputy Minister of Information and Communications also called on Vietnamese businesses, especially digital technology businesses, to create big dreams and big thoughts for themselves to change the future. , your own destiny and your nation’s. “Vietnam Digital Technology Challenge Forum” is a continuation of the series of events “Technology Friday”, launching digital transformation platforms in 2020, organized in a new format. Accordingly, in addition to the introduction of the digital platform development unit, there will be more direct interaction sessions between the platform development team and the media, users in the form of a debate. Participants of the event will be asked questions, directly showing multi-dimensional perspectives on the platform, and at the end of the session, everyone will be publicly voted for the gender-selected Make in Vietnam technology products and solutions. introduction. Platform launch events within the framework of Vietnam Digital Challenge Forum will be held every Friday at the Ministry of Information and Communications.

Representative of BKAV introduces eMeeting Platform. eMeeting is developed by BKAV Joint Stock Company and International Progress Joint Stock Company (AIC), equipped with 9-layer security system, optimized data compression, online meeting support up to 200 the demand point, providing good audio and video quality even under weak network conditions. eMeeting has all the necessary features of the meeting such as scheduling, calendar reminder, document sharing, screen sharing, online video sharing, meeting management, meeting management, voting … Introducing specifically about the application, Mr. Vu Ngoc Son, Vice Chairman of BKAV’s Board of Directors said, with the advantage of being a network security company, eMeeting is designed with a protection system of up to 9 layers of security, Including: Protection of transmission channels; firewall; terminal protection; endpoint encryption; archive encryption; database encryption; application security; device security and user authentication. With this security system, customers can use peace of mind without having to worry about insecurity issues when meeting online, such as revealing meeting content or strangers entering the meeting room … Speaking at the launching ceremony, Deputy Minister of Information and Communications Nguyen Huy Dung said, in the context of many concerns about the disadvantage at home of online meeting solutions “Make in Vietnam” compared to In foreign online meeting applications such as Zoom, Microsoft Team …, the eMeeting platform of AIC and BKAV introduced today is a product that brings the aspiration of mastering technology to overcome the shadow of the men. large technology in the world. “The launch of eMeeting today is not only a strong affirmation that Vietnamese businesses will not give up, but also dare to take on challenges so that the aspiration of” Make in Vietnam “will come true. The only way to someone who dares to accept new challenges, if you do not dare to take risks with unusual things, you will forever be buried with ordinary things “, Mr. Nguyen Huy Dung emphasized. At the same time, the Deputy Minister of Information and Communications also called on Vietnamese businesses, especially digital technology businesses, to create big dreams and big thoughts for themselves to change the future. , your own destiny and your nation’s. “Vietnam Digital Technology Challenge Forum” is a continuation of the series of events “Technology Friday”, launching digital transformation platforms in 2020, organized in a new format. Accordingly, in addition to the introduction of the digital platform development unit, there will be more direct interaction sessions between the platform development team and the media, users in the form of a debate. Participants of the event will be asked questions, directly showing multi-dimensional perspectives on the platform, and at the end of the session, everyone will be publicly voted for the gender-selected Make in Vietnam technology products and solutions. introduction. Platform launch events within the framework of Vietnam Digital Challenge Forum will be held every Friday at the Ministry of Information and Communications.

According to Deputy Minister Nguyen Huy Dung, aspiration will need to go through challenges to become one big enough. The more challenges there are, the more proving that aspiration is right, because it is the aspiration made up of social frustrations and challenges. The demo meeting is conducted on eMeeting online meeting platform Deputy Minister of Information and Communications assessed, eMeeting of AIC and BKAV is a product with many aspirations. It is the desire to master technology, and overcome the “shadow” of the technology giants in the world, although there are many concerns about the disadvantage of online meeting solutions Make in Vietnam so. with Zoom, Microsoft Team … “The launch of eMeeting today is a strong affirmation that Vietnamese businesses will not give up, and dare to take the challenges to make Make in Vietnam aspirations come true. Because real opportunities only come to those who dare to accept new challenges, if you do not dare to take risks with unusual things, you will forever bury your feet with ordinary things “, Deputy Minister Nguyen Huy Dung emphasized. The Deputy Minister of Information and Communications also expressed his wish through eMeeting’s story, calling on Vietnamese businesses, especially digital technology businesses, to create their own big dreams and big thoughts for themselves. change your own future, your destiny and your nation’s. Online meeting platform eMeeting developed by the cooperation between AIC Group and BKAV Group, equipped with 9-layer security system, optimized data compression, supports online meetings with up to 200 points. requirements, providing good video and sound quality even under weak network conditions. eMeeting has all the necessary features of the meeting such as scheduling, calendar reminder, document sharing, screen sharing, online video sharing, meeting management, meeting management, voting … Mr. Vu Ngoc Son, Vice President in charge of Anti-Malware of BKAV Group introduces eMeeting online meeting platform Answering the question of whether this platform can accommodate meetings with more than 200 bridge points, Mr. Vu Ngoc Son, Vice President of Anti-Malware Division of BKAV Group said, with meetings with more than 200 Demand points such as shareholder meetings, multi-branch meetings, large lecture-scale online learning … designers offer a streaming solution similar to a livestream on YouTube or Facebook, but with stable quality though in low speed internet conditions. Right at the presentation, the representative of Information Center, Ministry of Information and Communications said that this software would soon be deployed in the upcoming online meetings at the unit./.

New Russian light jet artillery system. (Source: Sputnik) This is information shared by Mr. Alexander Kochkin, CEO of JSC NPK Techmash. “The lightweight MLRS system model was introduced to interested military authorities and received their support in principle. The military proposed a way to install this jet artillery in cars. As well as the missions placed on the system on the battlefield, the key to building this model is the S-8 type unmanned missile, “Kochkin said. He noted that at present, related businesses are actively conducting research work, which defines the technical structure of the new MLRS system, from which it will fabricate and test samples of the system. According to Alexander Kochkin, “the review of the test results, the development of feasible proposals to continue the work and the form of implementation of those options, as well as the funding expected to be completed by 2022” . NPO SPLAV is the developer and manufacturer of all Russian series jet artillery systems – proven MLRS systems such as Grad, Uragan and Smerch, as well as the state-of-the-art Tornado-S and Tornado-G. So far the minimum size of the MLRS system produced in Russia is 122 mm. The S-8 is a Russian unmanned missile with the size of 80 mm. The ammunition is designed to be launched from helicopters and aircraft to strike ground targets. The missile has many different warheads weighing from 3 to 9 kg and can destroy both infantry, armored vehicles as well as entrenched enemy structures. (According to Sputnik)

Many comments of experts and scientists at the seminar On April 12, 2019, Di An Train Joint Stock Company was approved by the Ministry of Science and Technology to host the National Science and Technology Project. “Research to complete the design process and manufacturing technology of high-class passenger carriages to meet the development requirements of Vietnamese railway” with 4 topics and 1 pilot production project. The goal of the Science and Technology Project is to improve the capacity of designing, manufacturing and testing high-end passenger carriages with a technical speed of 120 km / h to meet the development requirements of Vietnam railway and proactively welcome the new industry missions. In order to organize the chair to successfully implement and achieve the objectives of the Project, there are open seminars and workshops in subjects and pilot production projects to ask for comments from experts. in the fields of subjects and test production projects. The comments of experts and scientists will be the basis for organizing and leading the completion of the content of experimental production projects and subjects. The workshop focused on analyzing, dissecting, and contributing ideas to the topic manager to complete the content “Research, design and manufacture braking system for high-class passenger wagons to ensure reliable operation at technical speed 120 km / h” by Assoc. TS. Vu Duy Loc is the manager and Di An Train Joint Stock Company is the main organizer. The implementation of this project will help Di An Train Joint Stock Company to control the calculation, design and manufacture of the braking system used for high-end passenger carriages with operating speed of 100 km / h, test speed. up to 120 km / h ensures high reliability, safety of train operation, meets technical standards as prescribed by the railway industry and national standards. At the seminar, many comments from experts and scientists are the basis for the owner of the topic and Di An Train Joint Stock Company continues to improve the contents of this topic to put into application. .

From a distance, Madsummer looked like a sparkling white ice 95 meters high, but only when he got closer could one feel its true beauty. The superyacht built by Lürssen was launched in 2019 and has a total of 5 6-star luxury decks, including a deck used to house the boat owners’ seaplanes.

Madsummer is the ideal choice for travelers who wish to own a yacht and an aircraft at the same time. To meet the needs of the boat owner, Italian designer Laura Sessa put on this yacht a vibrant yet unobtrusive beach house style.

The main living room is filled with mulberry blues and pinks, bolstered by striped Tai Ping silk carpets and a formal lacquer dining table. According to Sessa, blue is the boat owner’s favorite color. This is not surprising as blue continues to appear on the upper deck, but this time is reinforced by the flaming orange reflected on the upper living room armchairs and the ceiling of the observation room.

To match boat owners, red, white and blue are the colors chosen for the overall. There are six passenger cabins, each decorated in a distinctive color, from magenta to orange and blue. Madsummer owns a 12 meter long swimming pool located behind the main deck with large sunshades.

Just a few steps away, guests can leave worries and worries behind at the spa and beach club. You are also free to choose from a boat, Madsummer has a total of 5 Jet Ski water motorcycles, canoes, windsurfing and a complete diving suit.

Madsummer entered the market at the end of 2020 with a price of 30 million USD, equivalent to nearly 700 billion VND, the rental price for this super yacht was up to 1.4 million USD / week.

Franchise Fast & Furious has written the history of action movies for nearly two decades, with gross sales of more than 5 billion dollars. Since its debut in 2001, Fast & Furious has always attracted the attention of a large number of audiences around the world through 8 parts and 1 extra story with spectacular cinematic experiences. Alternating thrilling action, the car racing chase to suffocate are still deep messages about family feelings that make the audience feel emotional. Next May, all eyes will focus on the long-awaited super product – Fast & Furious 9: Legend of Speed ​​(original title: F9).

To get the audience’s attention, Universal has released a new trailer for Fast & Furious 9, and this trailer is also tacitly asserting what fans have long guessed – towards space. The idea of ​​Dominic Toretto (Vin Diesel) and his family venturing into space started as a joke many years ago, but over time it has become a serious one. Cast Ludacris and Michelle Rodriguez seem to have confirmed Fast & Furious 9 will include some space moments, and now the latest trailer has shown footage of Tej (Ludacris) and Roman (Tyrese Gibson). wear a homemade space suit.

Han’s flickering appearance in the first trailer of Fast & Furious 9: Legend of Speed ​​made the audience feverish and excited if this was a trick of a production crew when it was really just a moment. rewind the time when Han did not lose his life? But in this trailer, Han is healthy, intact, his skills are still as bad as ever. He even barely saved Letty and Mia from death. Han’s new hairstyle and look further confirm that the “resurrected” guy from the dead is real. The reason why Han still survived that terrible car explosion is still open, making fans even more excited.

While sharing the trailer with Thehollywoodreporter, Fast & Furious 9 director Justin Lin revealed Tej and Roman’s car design work. Despite what many might think about the franchise’s realism, Lin actually spoke with some experts to come up with a plan to make the F9’s space car as realistic as possible. “I talk on the phone with scientists, learn about fuels and physics.” “It’s great, when the scientists at the end of the line say, ‘Wait, what? What are you guys trying to do?’ I love that idea “. In the trailer, the car is equipped with boosters to create momentum to help the car fly.

Universal also released a second trailer last night (in Vietnam time), making fans fidgety by too many stunned details. It is the appearance of Jakob – a rival for the first time in Fast & Furious history but sharing the same bloodline with Dom (Vin Diesel), pushing him into a wicked situation when “a drop of blood digs more than a pond of water. “. The scene of two cars driven by Dom and Jakob, colliding like two lions trying to devour each other, caused the audience to question a big question about the Dom brotherhood.

Although Fast & Furious often does give a somewhat fictional sequence, in reality the requests behind the scenes are as close to reality as possible. While a space car isn’t new in the movies, audiences can watch Fast & Furious 9 with the understanding that some elements of the space car actually stem from research. real science research. There could be even more vehicles in space than in the movie.

Hollywood’s unique racing blockbuster promises to satisfy all senses, the craziest ideas will hit the top “Nothing is impossible!”. All fans of the series need to do is prepare to be ready to welcome the super storm that Fast & Furious 9: Legend of Speed ​​brings in May. In particular, Vietnamese audiences are extremely lucky to be in the countries that enjoyed the earliest blockbuster in the world. The official opening date at theaters in Vietnam is May 28, 2021, while the international fan community (Europe and America and many countries) will have to continue waiting.