After school or in his spare time, Canto often performs burrowing by hand. Later, Canto’s friend Andreu brought along a pneumatic drill to speed up the process – the two eventually created a 3m deep cave. Andres Canto stands outside his cave. Six years later, Canto tried to create his own cave with separate living room and bedroom with heating, wifi, music system. Now 20 years old, Canto really doesn’t understand what motivated him so much to build this cave but he’s happy with the result. Canto continued: “It’s great, I have everything I need. Working here can be uncomfortable because it’s humid and there’s not much air around, but I found my own motivation to keep going. keep perfecting it every day”. Cantor’s burrow sometimes suffers from flooding and is often visited by insects, spiders, and snails, but this guy usually doesn’t mind. He further explained: “I have always liked building small huts. I live in the countryside and when I find discarded wood, I will build a nice house,” added Cantor. Canto estimates that the project costs no more than €50 (£43) as most of the building materials are much cheaper than he expected. Canto mainly burrows using buckets to bring up the soil, but eventually decided to incorporate other digging techniques such as using a pulley system. Canto also reinforced his cave’s roof using a vaulted entrance and vaulted ceiling with columns, as well as concrete walls to prevent collapse. Image of the cave during the previous construction. Video of Canto’s cave quickly went viral on social media and immediately attracted the attention of local authorities. Canto said: “Since I was the first to do such a thing, when the local officials arrived, there were no specific reports of it. It was not a basement, nor was it a warehouse, it’s just a well-built hut in the ground.” Amazingly, Canto’s parents were also normal with their son’s “retreat” in the ground. Canto even said: “My mother went down to the cave and told me it was smaller than the one in the video”.

If your land area is not much, this is one of the most beautiful level 4 tube houses with modern flat roof you should pay attention to. Looking at the sophisticated modern design, this model of level 4 tube house becomes more comfortable and luxurious, which is the optimal choice for families whose land fund is not very spacious. In this house you can design a light-toned wall paint color to create space for the house. In this house, it meets all functions such as bedroom, kitchen, living room, toilet… The model has an extremely impressive design with a sloping roof combined with wood tones. In particular, the large frontage helps the house to be filled with natural light. If this house is built rough and painted, it only costs about 250 million. The interior part will cost an extra cost. Type 4 tube house for families with small land area Level 4 house with mezzanine roof design Level 4 houses with mezzanine design are an architectural trend in recent years, the reason being that it helps homeowners make the most of space while still saving costs. With this model of a 4-level house with a mezzanine roof, you can see that the ceiling is quite high to combine with the mezzanine to create the feeling of a spacious 2-storey house for people living in the house. In particular, the model of a level 4 house with a mai tum or a mezzanine floor helps to expand the living space and save the maximum cost. This model impresses with the diagonal roof of the tum and the railing to create the feeling that the house has 2 floors in a very modern eye-catching. The rough construction cost for this house is about 250-300 million. Type of tube house with mezzanine Level 4 house with garden style roof The models of Thai roof houses have an extremely modern design with the façade of interlocking squares and a small yard in front of the door, which is a type of house built a lot in the countryside of our country. In this type of house with 4 roofs, you will receive a lot of sunshine, lots of wind blowing into the house, creating a feeling of warmth in winter and cool in summer. This type of house is always the first choice because of its high aesthetics and large application. Type of 4-level house with Thai roof combined with garden This model has actually impressed many users, so there are many families to choose from. With the cost of this type of house when building rough falls in the range of 250-300 million.

The technological process of sequencing the SARS-CoV-2 virus genome by the new generation sequencing machine PacBio is the result of a scientific project assigned by the Vietnam Academy of Science and Technology to the Institute of Biotechnology. (biotechnology) implementation, in order to meet the needs of supporting the handling of the COVID-19 epidemic in Vietnam. Phylogenetic tree of SARS-CoV-2 strains collected in Vietnam until April 1, 2021. The NCBI reference MN908947.3 was also included as a comparison (black), while the SARS-CoV-2 genomes analyzed and provided by the Institute of Biotechnology were included in the comparison (boxed in red). Sequences are colored according to the GISAID classification. The taxonomic tree shows the evolution of SARS-CoV-2 as well as when the strains entered Vietnam one by one. Prof. Dr. Truong Nam Hai – Project leader said that the Institute of Biotechnology has collaborated with the Pasteur Institute in Ho Chi Minh City and the National Institute of Hygiene and Epidemiology (NIHE) to develop a technical process to sequence the entire SARS virus genome. CoV-2 by PacBio’s long segment sequencing technology, including 6 steps: (1) Culture and extraction of viral RNA. (2) Synthesis of double-stranded cDNA from viral RNA. These two steps were carried out at the Pasteur Institute in HCMC and NIHE in clean room conditions of class III biosafety. (3) Prepare a DNA library for gene sequencing. (4) Sequencing the whole genome of the SARS-CoV-2 virus. (5) De novo assembly of the viral genome. (6) Annotation and analysis of viral genomes. The following four steps were performed at the Institute of Biotechnology in about 48 hours. Also according to Prof. Dr. Truong Nam Hai, in Vietnam, to sequence the SARS-CoV-2 virus genome, domestic units use short-sequencing technology. Then assemble and reference the previous genome. This technology takes a long time to read the complete genome (3-4 days) and there are still errors in reading. “Some other units can sequence with next-generation equipment based on the principle of sequencing short fragments. That is, they sequence short fragments, then assemble these fragments together into long segments. To sequence a genome, and to sequence that, the units must now use the reference sequence that has been solved previously (as before, China was the country that successfully sequenced the strain in Wuhan) After solving the short segments, use the reference sequence to assemble to form the genome of the strain that we are sequencing.This is often a long process, short sequencing is often difficult to do. read the entire genome fully, so sometimes it is necessary to use an additional sequence called sanger sequencing to fully read the genome that we are interested in.Besides, this method also has other advantages. reading errors, so editing it also takes more time “- Professor Truong Nam Hai said. Prof. Dr. Truong Nam Hai also said that the project has sequenced the entire genome of four strains of SARS-CoV-2 virus, with a length of over 29500 nucleotides/genome. The results of genome assembly showed that there were no reading errors or blanks, and the sequencing results achieved 99.99% accuracy. “Currently this is the only device in Vietnam, it doesn’t have to read short paragraphs, but read long ones. Reading short paragraphs only reads 100-200 nucleotides/fragment, then assembles into a full genome. But Long segments can read thousands, tens of thousands of nucleotides/segment, and reading long fragments, when assembled to produce a genome, it is simpler and more accurate, the accuracy is equivalent to 99.99%- ie reading errors are almost nonexistent, assembly is very fast.It takes about 2 days for sequencing, assembly and analysis to complete the genome of a virus “- GS Hai said. With the construction and mastering of PacBio’s long-range genome sequencing technique for SARS-CoV-2 virus, according to scientists’ assessment, it has opened up the possibility of fast and accurate viral genome sequencing. without relying on international reference gene sequences. This allows Vietnamese scientists to sequence new viral pathogens in the future without the need for a reference genome. Genome sequencing data contributes to determining the origin of the virus and the number of sources of infection (F0) in the outbreaks, is a scientific basis and important information in the development of strategies and plans for prevention and control. effective spread of the virus in the community. Assoc. Prof. Dr. Ha Quy Quynh – Head of Technology Application and Deployment Department, Vietnam Academy of Science and Technology emphasized: “The successful study of the technological process of decoding the SARS-CoV-2 virus gene is contributed to the treatment regimen that we were able to suppress the epidemic, in particular, gene sequencing along with tracing allowed us to determine the source of the virus’s spread – the F0s, from which We have a scientific basis for us to isolate and isolate the number of people involved, and we also have a scientific basis to deploy optimal treatment regimens.” With the mastery of the existing technological process, capacity and conditions, the Vietnam Academy of Science and Technology also said that it is ready to cooperate with medical institutions in sequencing the system. genes of SARS-CoV-2 virus on a large scale in urgent cases, in order to effectively serve the prevention of COVID-19 epidemic in Vietnam./.

Hanoi Plastics focuses on investing in developing the mold field. The key to helping Hanoi Plastics “accelerate” “Independent and proactive in technology is a big dream of many businesses. And in order to realize that dream, it is necessary to research and develop (R&D), invest in facilities and people, especially a team with good expertise, understanding background knowledge. Gathering this team, creating conditions for them to rub and resonate is a priority in the field of supporting industries today,” said Mr. Bui Minh Hai, Chairman of Hanoi Plastics Joint Stock Company. When focusing on this field, An Phat Holdings Group has researched and given clear orientations and strategies to carefully build infrastructure, invest in equipment, and apply technology for manufacturing. get important details and components for big companies. In particular, the Group has invested and turned Hanoi Plastics into an enterprise capable of designing and manufacturing all kinds of molds from super-precision to large-sized molds serving the automotive industry, but few enterprises which can be done in the country. Instead of having to cooperate with one or more third and fourth parties to design, manufacture and test molds, which increases costs and production time, the end-to-end finishing of products within the company. The company will improve quality and reduce costs. With two factories in Hanoi and Hai Duong, especially possessing a modern mold system, Hanoi Plastics is now competitive enough to strongly develop this segment. In particular, the company attaches great importance to the development of core human resources. When working with FDI customers, Hanoi Plastics completes the basic criteria required by partners, then coordinates with consultants to come up with products that exactly meet partners’ requirements. Every year, the company organizes training and retraining of key human resources, sending to participate in training courses, training with research experts and offering effective solutions in production labor. “We believe that, in order to create components with high complexity and high intelligence, the human resource strategy is an extremely important strategy,” added Mr. Hai. In addition, Hanoi Plastics plays an important role in supporting industry development programs organized by the Ministry of Industry and Trade, in order to expand, connect trade, and share experiences with many businesses and ministries. , departments, branches in the same field. The company has been actively participating in production improvement cooperation programs of the Ministry of Industry and Trade in combination with FDI enterprises. Members of Hanoi Plastics An Trung Industries Limited and Vietnam Precision Mechanics and Mold Manufacturing Company Limited (VMC) are also evaluated by FDI enterprises as excellent enterprises in their improvement and growth programs. steps in improving production capacity and quality control. Revenue plan of VND 1,900 billion in 2021 The factory is supported by foreign experts to design and install according to strict standards. In 2021, Hanoi Plastics focuses on researching and developing new products, promoting its strengths in manufacturing plastic molds and industrial products, targeting Japanese customers and FDI companies. At the same time, the company maintains and develops existing customers in the field of plastic components for automobiles – motorcycles, electrical – electronics such as Toyota, Honda, Panasonic, LG, Piaggio, Samsung, Brother, Foxconn… Especially, this is also the year the member companies of Hanoi Plastics run at full capacity, deeply participating in the value chain of supporting industries. In particular, VMC with a capacity of 230 plastic injection molds/year will meet diverse needs from customers of cars and motorbikes, to customers of printers and computers to electronic devices such as televisions and phones. An Trung Industries Co., Ltd. expands its electronic product portfolio, targeting FDI companies manufacturing mobile phones. At the end of 2020, An Trung Industries was also selected by Foxconn as a supplier. This is a new factor, opening more growth opportunities for Hanoi Plastics in 2021. To realize this strategic goal, the entire factory, infrastructure, human resources, and production equipment are synchronized according to the strict standards of customers, supported by foreign experts directly. design and installation assistance. With those steps, Hanoi Plastics sets its business plan in 2021 as revenue of VND 1,900 billion, up 78.5% compared to 2020, profit after tax of VND 150 billion, going deeper into the global value chain. .

When it comes to Jennie, everyone remembers the moments when Jennie was extremely chic with red lips like fire. Indeed, Jennie and red lipstick are the perfect couple, helping the female idol stand out even more. Jennie is actually still very pretty when she wears lighter lipstick, but then she will look innocent and lovely, not gorgeous. And if I had to choose between the cute version of Jennie and the sharp version of Jennie, I’m sure the audience would choose the latter more. With her beauty recognized as “beautiful like Miss”, Jisoo can handle all lipstick colors. Jisoo with vibrant lips is extremely sharp, different from her usual image. But netizens think that Jisoo is the prettiest when she wears orange lip gloss. At that time, Jisoo’s heart lips were the sweet highlight, helping BLACKPINK’s eldest sister to be both gentle and feminine and very young. Rosé is actually very suitable for deep makeup with reddish brown lips that are very picky about her face. Not everyone has an impressive aura like Rosé when choosing this lipstick color. But Rosé as well as the stylist of BLACKPINK likes to use coral pink lipstick the most. When performing well in real life, Rosé favors sweet pink lipsticks because it helps her to be both modern and youthful, while also having a sweet nudge. Lisa’s “true love” is an earthy pink matte lipstick. This color brings an image that is both trendy and personal, with Lisa’s style standard. From promotional images for MAC cosmetics to everyday life, Lisa loves this lipstick. In addition, the pink and orange lipstick is also trusted by Lisa when she needs a bright and beautiful appearance like a real-life Barbie doll.

According to the Moskovsky Komsomolets newspaper, the project to build Russia’s own domestic space station was approved by President Vladimir Putin during a closed-door meeting on the development of the space industry. Work on creating a national orbital station is scheduled to launch in the near future. Experts are faced with the task of building the space object as soon as possible, in order to prevent the long-term absence of Russian cosmonauts in orbit. The publication Moskovsky Komsomolets reminds that the estimated service life of the Russian segment on the International Space Station will end in 2025. After that, the module will be destroyed. The proposal to abandon the ISS was previously announced by the Russian National Space Corporation – Roscosmos. The experts of the above enterprise believe that serious system problems of the orbiting station in operation may begin soon, as its useful life is about to end. According to preliminary estimates, maintaining the Russian segment on the ISS in the coming years will cost 10-15 billion rubles, which is very expensive compared to building a completely new one. The International Space Station has been in use since 1998, its life will end in 2024. Currently, the countries participating in the project are considering options to prolong the existence of the multi-space space research complex. capacity until 2030. In the meantime, it is known that some components for the International Space Station ISS will be utilized by Russia. The first basic module for the future Russian national orbital station could be a component previously designed for the ISS. Experts from RSC Energia are currently working on the Science and Energy module (NEM) and it will be ready for launch in 2025. The head of the Roscosmos Group – Mr. Dmitry Rogozin wrote about this on the Telegram channel of the company. myself. Mr. Rogozin also reiterated that Russia intends to withdraw from the ISS after 2025. By that time, Moscow plans to build its own orbiting station for scientific research purposes. Earlier, Russian Deputy Prime Minister Yuri Borisov said that the situation related to the “aging” of the ISS structure could lead to dire consequences. So Moscow should create an alternative as soon as possible and not put the astronauts at risk. In addition, Borisov also revealed that the future national orbiting station could become “high-orbit” (located above the ISS), which would not only be used for scientific research, but also serve as a “transshipment base” in the mission to conquer the Moon. As for the NEM module, work on its creation began in 2012. According to the plan, by 2015 the device should have ensured energy independence for the Russian subdivision on the ISS. However, at that time only the preliminary design was completed. NEM’s ground tests only really started in 2018. While its launch date has been repeatedly postponed. In the coming time, Russian scientists will certainly have to be more active, because progress is increasingly urgent. In addition to the NEM that will become the main module, according to Dmitry Rogozin, two permanent working modules named Nauca and Prichal may also become part of the Russian space station in the future, both modules will be sent to the ISS in the future. this year.

Apple will use its own 5G chip for iPhones in 2023. Photo: Macrumors TF International Securities analyst Ming-Chi Kuo said that Apple’s first 5G iPhone 12s reached consumers last year. Apple’s entire iPhone model is dependent on Qualcomm chips, and now Apple is designing its own 5G chip for use in its latest iPhones in 2023. Apple currently uses Qualcomm modems, including the Snapdragon X55 modem in iPhone 12 models. In 2019, a legal agreement between Apple and Qualcomm revealed that Apple will likely use the Snapdragon X60 modem on iPhone models. 2021, followed by the Snapdragon X65 modem for the iPhone 2022. Apple’s roadmap is that by 2023, it is likely that the iPhone will use the Snapdragon X70 modem with Apple working to make its own 5G chip, it is unlikely that Snapdragon will be available on the iPhone model in the next years according to the. A deal between Apple and Intel worth $1 billion brought Apple the 5G modem business in 2019. This is an opportunity for Apple to ditch the Qualcomm chip to use its own 5G modem. In recent years, Apple has continued to expand around internal chips for its other product lines. Most recently, the Apple-designed M1 Chip is available on select Mac models and is currently on the iPad Pro. Apple will also gradually phase out Intel chips in its latest product lines. It is known that Apple’s Modem will probably be manufactured by longtime chip manufacturing partner TSMC, the world’s largest semiconductor company.

Coming to Hue, watching Hue at night will have different experiences about the ancient capital. (Da Vien Bridge in the night). Hue night of the city gates is silent at the same time, of the spans of Truong Tien Bridge gently sparkling in the hair of loved ones. Trang Tien Bridge is the most beautiful bridge in Hue today. Perhaps anyone who comes to Hue wants to take a stroll through. this poetic place once. But if just to see and enjoy the scenery, visitors should wait at night on weekends to be the most beautiful. On weekend nights, visitors will see the outstanding and brilliant Trang Tien Bridge in a colorful sparkling outfit of thousands of shimmering lights that change color continuously. Some people therefore compare Trang Tien Bridge to a beautiful rainbow at night. Back to Truong Tien. The night wind blows, the mist from the Perfume stream is cold into our souls, lightening all worries. Modern life momentarily seems to stand still, forgetting the heart, echoing the sweet and gentle chanting, from the image “On the Huong Giang river / I let go of the oars…” Hue turns around with the rhythm of time, next to the mossy ancients. New roads, new bridges spring up in the heart of the city. Although more modern, it still has a timeless contemplation. (The Ngu Phung floor in the night). Ngu Phung floor in the night. Couple’s night City at night seen from above. City center at night. Phu Xuan Bridge seen from above at night Hien Nhon door shimmering in the night of fireworks The rhythms of everyday life but in the night seem softer, more poetic and romantic. The janitors in the night… … street vendors are still here and there on every small street… Hue is still so gentle to every moment of the night…

A bookstore with a cute name “Fox” (Fox), owned by an elderly woman, was opened nearly ten years ago. The bookstore owner is also a local, born in Kha Kha Thac Hai (Keketuohai) in the Altay Mountains, with a special interest in painting and books: “It’s been eight years since the bookstore opened. The scenery here is ideal for us humans to enjoy, and Kanas is like the kingdom of all animals. I think it’s great to name my bookstore Fox. Tourists come here no matter how they pronounce my bookstore name, as long as they remember it. At first this bookstore was also quite modest, now it is full of books. All the materials to decorate the bookstore are purely local products. For example, this is a basket people here are used to knead dough, but I like to use it to store paint.” Many people are curious to wonder if this small bookstore located in a desolate place like this will work effectively, or who will come here to buy books when online retail platforms like Taobao and Dangdang are being sold. more and more blooming, with special promotions, shocking book discounts. But according to the owner, she opened this small bookstore for a very simple purpose, which is to “beautify” this fascinating land. Another reason is to help connect with more travelers: “I used to help kids write their first handwritten letters here, or at this same bookstore many newlyweds write their first love letters. It brings many good memories of Kanas to tourists.” Kanas in Mongolian means beautiful, rich and mysterious. This reserve is famous for its beautiful natural ecological system made up of rivers, lakes, forests and grasslands. Notable is Lake Kanas, derived from the glacier of the same name on Mount Atlay.

The 4 basic body shapes of women include the athletic body (rectangle shape), the hourglass figure, the pear shape, and the apple shape. Basically, women’s body shapes are classified into 4 main types, including: rectangular body shape, hourglass figure, pear shape and apple shape. With these body types, what are the perfect dresses for girls? Hourglass figure Girls with an hourglass figure can be seen as possessing the desirable “golden” body proportions of many girls. People with this body shape often have an upper body proportional to the length of their legs. Especially the small waist creates sexy body curves for girls. Taking advantage of her sexy appearance, hourglass-shaped girls need to choose body-hugging dresses or skirts, or tight-waist dresses such as V-neck dresses, off-shoulder dresses, bodycon dresses, dresses. wrap… On the contrary, girls need to avoid choosing loose dresses, high waisted dresses or oversized dresses so as not to make the appearance become blurred at events. Pear body shape (or triangle body shape) People with a pear-shaped body usually have a smaller upper body than a lower body, and large hips and thighs. In order to choose the most harmonious and flattering outfit, the girls who own this body need to choose dresses that highlight the upper body or tight skirts that are emphasized at the waist. Dress styles with tight designs or prominent details for the bust, such as cup dresses, off the shoulder dresses, V-neck dresses and A-line skirts will be perfect choices for women. Pear-shaped girls. Besides, those who own this body should not coordinate with oversized dresses, puffy dresses … so as not to make the appearance become sloppy and disproportionate. Athletic body shape (or rectangular body shape) If you have an athletic or rectangular body shape, your body will look thin when viewed from the side, with broad shoulders and an indistinct waistline. The secret for girls with this body shape to wear well is to choose dresses or skirts that can accentuate the upper and lower body. In other words, the outfit you choose should create an hourglass effect. Dresses that balance the upper body and accentuate the waistline include strapless dresses, pleated dresses, and U- or V-neck dresses that are great for you. If you want to add extra flair to the waist, choose a wrap dress or add a belt to your dress. In addition, strapless dresses, tight dresses are not an option for girls with an athletic figure. Apple body shape (or round figure) For girls with a chubby or apple-shaped figure, choosing a dress or skirt that flatters their figure seems like a daunting task. However, the secret to helping chubby girls look more stylish is to choose dresses that highlight the lower body and create accents for the waist. Formal dresses, swing dresses, wrap dresses or A-line skirts are the ideal items for apple-shaped girls to choose to attend any event. However, in order not to make the dress you wear become rough or look bigger, you should not choose dresses or skirts with horizontal stripes or oversize shapes. Posts: To Hoang Bao

If your land area is not much, this is one of the most beautiful grade 4 tube houses with modern flat roofs you should care about. Looking at the sophisticated modern design, this grade 4 tube house becomes more comfortable and luxurious than the optimal choice for families whose land is not very spacious. In this house you can design creative colors of the wall to create a space for the house. In this house, which meets all functions such as bedroom, kitchen, living room, toilet … This model has an extremely impressive design with sloping roof combined with wood tones. In particular, the large facade helps the house flooded with natural light. This house has a rough construction and paint roll, it only costs about 250 million. And the interior will incur an additional cost. Type 4 tube house for families with small land area House level 4 design mezzanine roof Type 4 house mezzanine design is an architectural trend in recent years, the reason is that it helps homeowners can make the most of the space while saving costs. With this mezzanine level 4 house model, you can see the quite high ceiling to combine with the mezzanine to create a feeling like a spacious 2-story house for people living in the house. In particular, the grade 4 house model has a attic or mezzanine to help expand living space while maximizing cost savings. This model impresses with the diagonal roof of the tum and the handrail creates the feeling of a very modern, eye-catching two-story house. The raw construction cost for this house is about 250-300 million. Type of tube house with mezzanine The house has 4 Thai-style roof garden The roof roof models have a very modern design with the facade of the interwoven squares and a small yard in front of the door which is the type of house built a lot in the countryside of our country. In this type of 4-roof house, you will receive a lot of sunlight, wind blowing into the house, creating a warm feeling in winter and cool in summer. This type of house is always the first choice because of its high aesthetics and great applicability. Thai style 4-roof house combined with garden This home model has actually impressed many users, so there are many families to choose from. With this type of house cost when building crude falls between 250-300 million.

As a unit of EVNNPT established on May 1, 1981, after 40 years of building and maturing, generations of leaders of PTC1 always care and invest in people, so that employees can own equipment, technology, ensure the power grid operation, safety, efficiency and quality assurance. Apply technology to check heat emission, detect the cause of the problem early Currently, the power grid managed by PTC1 is mostly transformers with large capacity (250MVA with 220 kV), (900 MVA with 500kV), along with oil resistance are the main equipment in the substations ( TBA). The company has widely applied online monitoring equipment to control the pressurized state under OLTC load, cooling system, current, pressure, oil … revealing the breaker of the company applying GIS, COMPACT technology, vertical compensation systems 500kV-2000A, new technology … is implementing the roadmap of gradually bringing 220 kV substations into remote control. The company is also the leading unit in the lead and acceptance of digital substations in Vietnam (220 kV Thuy Nguyen substation) and is assigned by EVNNPT to develop a process for accepting digital substations in the corporation. The development of technology and the rapid growth of the volume and scope of management requires that the qualifications of the staff be enhanced to meet the requirements. Accordingly, the company has identified training objectives for each specific target group with many types of training. At the same time, to alternate dispatching qualified, qualified and young staff members at substations, functional departments and regional power transmissions to the company’s technical department, while training in the form of mentoring, just participating in the work of acceptance of new projects to get an overview, synchronize and improve the level … Owning technology equipment The results of many recent years show that the company always ensures good implementation of the incident targets. The quality of human resources has been raised, creating conditions to arouse a movement to promote technical innovation initiatives in labor. In the past 5 years, the company has had 288 initiatives proposed to be applied in production, bringing an estimated value of several tens of billion VND, more importantly, initiatives and rationalization of production are all derived from practical needs of production. Thuy Nguyen 220kV substation (Hai Phong) is the first digital substation of EVNNPT managed and operated by PTC1. The appreciation of the human factor and creating conditions for each individual to improve their skills has helped the company to master equipment, technology and become more and more professional in management. By internal force, the company has successfully implemented a number of typical projects such as: replacing porcelain and accessories for the whole 220kV Hoa Binh – Ha Dong transmission line; overhaul and overhaul 500 kV transformers at Ha Tinh, Nho Quan and Hoa Binh stations … In addition to major repair works, the company has also successfully implemented many large-scale and complex construction investment projects such as: Raising the capacity of 500 kV capacitor line in Nho Quan- Ha Tinh; increase capacity of 500kV Thuong Tin substation; raising the capacity of the 220 kV transmission line Hoa Binh – Nho Quan … are all group B projects with total investment value of 300 to 450 billion dong. With efforts to care about people, the company has overcome many difficulties and always completes the assigned tasks. With the achievements in the past 40 years, PTC1 has been awarded many noble titles and awards by the Party and the State such as: Third Class Independence Medal in 2000; Labor Hero 2005; Second Class Independence Medal in 2007; First Class Independence Medal 2014.

The house is built by Icon Company with 3D printing technology, in the suburbs of Austin, Texas (USA). Photo: Icon To build, Icon uses a large 3D printer on the surface of nearly 40m2. The house for Mr. Shea has full amenities, including bedroom, bathroom and living room connected to the kitchen. In September 2020, Mr. Shea officially moved to his 3D printing house, ending years of temporary living. Earlier this year, this house protected him from a historic blizzard in Texas, so good he had to say, “I didn’t even know there was a blizzard until I pulled the curtains up!” Compared with traditional building materials such as brick, wood or steel, the 3D printer uses a special type of “flexible concrete” with high durability. CNBC quoted Jason Ballard, CEO of Icon, said that this method saves 10-30% of construction cost and several months of construction compared to traditional houses with the same area of ​​use. So far, the success of this new technology-built model has helped Icon raise $ 59 million. This company has provided more than 20 homes for homeless people in the US and Mexico.