Improvements of the Superveloce S compared to the standard version Superveloce 800 2020 include: new cornering ABS brake from Continental, new engine management system as well as a new TFT-LCD instrument screen. With a top speed of up to 240 km / h, the Superveloce S uses the same engine as the base version Superveloce 800, 12-valve DOHC, liquid-cooled, 3-cylinder in-line with intake and exhaust valves. Ti tan capacity 798 cc. Power is produced at 147 hp at 13,000 rpm with 88 Nm of torque at 10,100 rpm mated to a 6-speed gearbox, sliding clutch and chain drive. The difference of the Superveloce S compared to the Superveloce is the seat is covered with brown Alcantra leather with a leather fuel tank strap. Gold-painted wheels and Pirelli Diablo Rosso Corsa II rubber tires. Braking system is equipped with Brembo company with radial 4-piston clamp holding the double floating brake disc 320 mm diameter while the rear wheel is equipped with 2-piston clamp and 220 mm diameter brake disc. Continental MK100 cornering ABS with reduced wheel lift really keeps everything under control when braking. Front suspension uses an upside-down Marzocchi 43 mm diameter, fully adjustable with 125 mm fork stroke. Meanwhile, the rear wheel uses a Sachs single shock, which can also be completely adjusted with a journey of 130 mm. Seat height is set at 830 mm and weight 173 kg with a fuel tank capacity of 16.5 liters. MV Agusta said that with this fuel tank the car can run 270 km with a combined cycle. 5.5 ” TFT-LCD color display with essential information and steering aids including cruise control, start control, GPS with MV My Ride app navigation mirroring, tracking Mobisat car and engine management controlled by application. Each Superveloce S is also equipped with a Racing Kit including a Racing 3 exhaust with dedicated engine mapping and a rear seat cover.

According to the explanation from Kia Vietnam, Seltos car versions recalled in the US are equipped with Nu MPI 2.0L engine; Meanwhile, THACO AUTO is manufacturing and distributing this crossover in the Vietnamese market with 1.4 Turbo and 1.6 MPI engine options. More than 20,000 Kia Seltos are being recalled in the US. Previously, according to information from the US Road Traffic Safety Agency (NHTSA), the new recall announced by Kia involved 125,400 Soul cars from 2020-2021 and 21,849 Seltos 2021 cars. All produced from November 20, 2019 to October 15, 2020. Explaining the error, Kia said: “During production at the piston oil supplier, inconsistent heat treatment occurred which caused the ring stiffness to be too high”, at the same time. : “Excessive oil ring stiffness can lead to external chipping, scratch the cylinder walls and may result in increased oil consumption, resulting in abnormal engine noise and / or The oil pressure warning light lights up “. The Korean car manufacturer warns that defective vehicles can damage the engine if they continue to be operated, even causing a fire in some cases. However, Kia has not received any accident reports related to this error. Kia Seltos is currently produced and distributed in Vietnam by THACO AUTO with 3 versions of Deluxe, Luxury, and Premium with prices of VND 609, 659 and 729 million, respectively. After more than 8 months of being in Vietnam, Kia Seltos continuously participated in the group of 10 best-selling cars in the market and always ranked first in the segment of B-size urban SUVs. In the first quarter of 2021, Kia Seltos achieved success. Company with sales up to nearly 4,000 units in Vietnam. Sponsorship news

On April 13, the US Department of Road Traffic Safety (NHTSA) issued a notice requesting a recall for Kia Seltos and Soul equipped with 2.0L Nu MPI engine. The total number of vehicles affected is 147,249 units. According to the NHTSA, the oil ring parts of the engine were not made to the correct standards and stiffer than necessary. This can wear and scratch the cylinder lining, causing lubricating oil to get into the combustion chamber. Besides the possibility of lubricating oil loss or the engine overheating, locking the cylinders, this problem can lead to a fire risk, according to NHTSA documents. Kia Vietnam has just announced the recall program of Seltos and Soul cars equipped with a 2.0L Nu MPI engine in the US, not related to the new Kia Seltos produced and distributed in the Vietnamese market. Regarding this information, on April 22, 2021, Kia Vietnam responded to the press and said the program recall car Kia Seltos In the US, according to the announcement of Kia Global on April 13, 2021, it is not related to Kia Seltos cars produced and distributed in the Vietnamese market by THACO AUTO. Specifically, the Kia Seltos versions recalled in the US are equipped with a Nu MPI 2.0L engine, while THACO AUTO produces and distributes in the Vietnamese market with 1.4 Turbo and 1.6 MPI engine options. Currently, THACO AUTO is produced and distributed in Vietnam with 3 versions: Deluxe, Luxury, and Premium with selling prices of VND 609, 659 and 729 million, respectively.

Honda Malaysia has just launched sportbike model CBR600RR 2021. This is a performance version for the track, the car has a price of 98,888 RM, equivalent to 23,975 USD. Honda CBR600RR made its debut in its home country of Japan in August last year and is only available in Grand Prix Red.

Overall, the design of the Honda CBR600RR upgraded is stronger and more aggressive than the old one. Unlike CBR650R with a sport-city vibe, CBR600RR is a pure sportbike and oriented motorcycle.

Easily recognize the design of CBR600RR 2020 inspired by CBR1000RR-R seniors with strong and modern appearance. The first part of the CBR600RR 2020 impresses with the sharp LED lighting cluster, the air intake cavity in the middle of the front end and the high turn indicator light.

Honda CBR600RR’s power comes from a 599 cc, liquid-cooled, inline 4-cylinder engine that produces 119 hp at 14,000 rpm, 64 Nm of torque at 11,500 rpm. 6-speed manual gearbox, the car is also equipped with power assist, anti-slip clutch and a fast gearshift system.

Honda CBR600RR also owns electronic steering assist technologies such as inertial force control, torque control system, stability assist during acceleration and ABS braking in cornering. The vehicle has 3 driving modes including Race, Sport and Road.

In addition, the car also has 2 custom driving modes for the track or tire settings. These modes are user-adjustable, including 5 power supply modes, 9 traction control levels, 3 wheel control modes and 3 engine braking levels. Behind the handlebar is a TFT-LCD screen that displays full operating information. Seat height at 820 mm and vehicle weight 194 kg.

This sportbike model is equipped with an up-side-down Showa fork in front, 41 mm in diameter, adjustable. Behind is a monoshock combined with Honda’s Pro-Link suspension system, with electronically controlled three-mode dampers.

The brake system consists of 4-piston radial brake calipers mounted on a twin 310 mm disc at the front, with a single piston caliper at the rear and a 220 mm brake disc.

Slow throttle response is the most common sign on turbocharged engines. This is caused by a suspended exhaust, i.e. always open or a vehicle with a fuel delivery problem.

When the turbo doesn’t accelerate as quickly as before then the first issue to consider is the turbocharger. Likewise, when the turbo has trouble maintaining its speed or is unable to reach a certain speed threshold, it is possible that the turbocharger is faulty.

Slow throttle response is the most common sign on turbocharged engines

1. Increase fuel consumption

Another benefit of using turbochargers is increased fuel economy, so if you notice a significant increase in your vehicle’s fuel consumption, you have to bring your garage to the test. This symptom can be caused by a variety of problems including a leak in the turbo causing raw fuel to flow into the exhaust.

1. Excessive exhaust fumes

A turbocharger reduces emissions which means it also significantly reduces the amount of exhaust fumes emitted from the exhaust on both petrol and diesel engines.

When the amount of smoke is generated too much even when the engine has warmed up, it could be a sign of a broken turbo, namely a crack in the case or worn seals.

This causes fuel to leak into the exhaust system, significantly increasing the amount of smoke released from the vehicle’s exhaust (or exhaust). Blue smoke may indicate a worn or worn valve seal or piston ring.

When the smoke is generated too much even when the engine has warmed up, it could be a sign of a broken turbo

1. Loud shout

The turbocharged engine actually works quieter because it reduces the sound of the intake air. However, if you hear a loud screech coming from the engine compartment, it is a sign that the turbocharged engine is not working properly.

Generally the louder the noise, the greater the damage, the problems that cause this noise such as: damage to the fan blade, vacuum leak, damage to the divider valve or poor ECU Remap.

1. Check the engine lights

On most modern cars, the computer system will detect turbo damage. According to maintenance care experience, this is the first sign that a car’s turbocharger is having problems.

This also makes it somewhat difficult for the user to choose; If you are looking to buy an air pump but have not yet chosen a good and suitable product, please refer to the following top 5 air compressors in Yen Phat!

Puma Air Compressor PX-2100 (2HP)

The Puma PX-2100 is favored for its high performance, meeting the diverse work requirements of users. With a capacity of 2HP, the working pressure is 8-10 bar (kg / cm²). This quality air compressor is suitable for use in small motorbike – car repair and maintenance shops; or used to spray paint, dry the car after washing and work using compressed air in the home.

Quality, genuine and reputable air compressors at Yen Phat electronics

– Maximum pressure: 10kg / cm²

– Capacity: 2 Hp

– Weight: 95 Kg

– Tank capacity: 95 liters

– Working pressure: 8kg / cm²

– Source voltage: 220V

– Air flow: 255 liters / min

– Speed ​​of rotation of compression head: 830 rpm

Number of compressor head cylinders: 2

– Size: 117 x 49 x 85 cm

Puma Air Compressor PX-7250A (7.5HP)

PX-7250A is a quality air compressor, typical of the cult brand Puma. Equipment with low noise, within the safety threshold should be used. In addition, the machine is also equipped with a motor wrapped 100% copper wire, for smooth operation. Along with that is the shell designed to reduce sound, shock absorbers, reduce vibration; thereby helping the machine to always operate in the most stable state.

Puma PX-7250A 2 cylinder air compressor with quiet operation, less vibration when operating

– Maximum pressure: 10kg / cm²

– Weight: 301 Kg

– Tank capacity: 228 liters

– Working pressure: 8kg / cm²

– Source voltage: 380V

– Air flow: 940 liters / min

– Speed ​​of rotation of the compressor head: 750 rpm

Number of compressor head cylinders: 2

– Capacity: 7.5 Hp

– Size: 161 x 70 x 115 cm

Palada Air Compressor PA-10300A

Palada PA-10300A is a series of high quality three-head piston compressors, used in many business units. It offers high working efficiency, providing large, uniform and continuous compressed air flow. To make the best investment decision, choose the right product for your usage requirements; Users can refer to the specifications of the machine below.

PA-10300A 3-cylinder compressor for large compressed air flow

– Working pressure: 8kg / cm²

– Air flow: 1538 liters / min

– Speed ​​of rotation of the compressor head: 816 rpm

Number of compressor head cylinders: 3

– Capacity: 10 Hp

– Tank capacity: 300 liters

Palada Air Compressor PA-4200

Palada PA-4200 piston compressors are highly appreciated by users for their good performance. With a capacity of 4HP, working pressure of 8 bar, large air flow of 360 liters / min; Helping the machine up slightly quickly, providing large compressed air flow, meeting the needs of many units. Tank capacity up to 200 liters, for the ability to store large amounts of compressed air, limiting the shortage of compressed air during operation.

Palada PA-4200 with the ability to rapidly rise, provide a large amount of compressed air, minimizing gas shortages

– Working pressure: 8kg / cm²

– Source voltage: 380V

– Air flow: 360 liters / min

– Speed ​​of rotation of compressor head: 1050 rpm

Number of compressor head cylinders: 3

– Capacity: 4 Hp

– Tank capacity: 200 liters

– Weight: 127 Kg

– Size: 130 x 46 x 98 cm

Kumisai KMS-55300 air compressor

One of the quality air compressors at Yen Phat electronics is the Kumisai KMS-55300 with many outstanding advantages in design, features, and large compressed air capacity. This will definitely be the perfect choice for today’s business units. Below are the specifications of the product, please refer to it.

Kumisai KMS-55300 possesses many outstanding advantages in design, features, and stable supply of compressed air.

– Maximum pressure: 10kg / cm²

– Working pressure: 8kg / cm²

– Source voltage: 380V

– Air flow: 600 liters / min

– Speed ​​of rotation of compression head: 850 rpm

Number of compressor head cylinders: 2

– Capacity: 5.5 Hp

– Tank capacity: 300 liters

– Weight: 181 Kg

– Size: 148 x 52 x 111 cm

Above are the quality and prestige air compressors, which are distributed by genuine Yen Phat electronics. If you need to order or need assistance consulting to choose the most suitable product for your unit’s usage requirements, please contact Yen Phat Company to get prompt and free support from its staff .