The disinfection robot combines two methods of UVC and chemical disinfection to help kill bacteria and reduce the spread of disease. The robot also has the ability to move flexibly, remotely or pre-programmed for a certain sterilization route. Le Anh Son, Deputy Director of Phenikaa Institute of Research and Technology (Phenikaa University), said that the robot is also capable of taking on tasks to support epidemic prevention and control in Bac Giang such as: Transporting necessities , monitoring sick and isolated people through monitoring cameras. Phenikaa University’s disinfection robot. The robot is fully self-propelled, avoiding collisions by using LiDAR technology, integrating artificial intelligence to recognize and remind people to wear masks, measure body temperature and a host of other superior features. . On the evening of June 2, the robot was put into operation for the first time. Before that, in the middle of May 2021 when the epidemic was complicated, students of Phenikaa University launched the campaign “Online learning – Show talent against the epidemic”. The students spent time and effort to create a droplet shield for medical staff, medical staff at hospitals, treatment facilities, and concentrated isolation. Up to this point, 10,000 droplet shields have been sent to more than 30 localities, of which more than half have been transferred to the epidemic center Bac Ninh, Bac Giang. High-tech products “make in Vietnam” such as: COVID-19 epidemiological information maps, disinfection robots, self-propelled robots, smart school solutions … or simply splash shields, orezol water These are all feelings of love and sharing from the collective staff, lecturers, scientists and students of Phenikaa University sent to the epidemic center.

Doctors at the No. 2 field hospital study how to operate the Phenikaa-X disinfection robot. Photo: C.Le Dr. Le Anh Son, Deputy Director of Phenikaa Institute of Research and Technology, said that the disinfection robot can take on the task of supporting epidemic prevention and control in Bac Giang with the main tasks such as: Transporting necessities, monitor patients and quarantined people through monitoring cameras. The robot is fully autonomous and avoids collisions by using LiDAR technology, with built-in artificial intelligence to recognize and remind people to wear masks, measure body temperature and a host of other features. Doctors at the No. 2 field hospital study how to operate the Phenikaa-X disinfection robot. Photo: C.Le Disinfection robot is one of the high-tech products and is directly applied in the prevention and control of Covid-19 epidemic by scientists from Phenikaa Institute of Research and Technology, Phenikaa-X Joint Stock Company, Phenikaa University research and develop to apply in real life. Doctors of field hospital No. 2 said that the presence of the Phenikaa-X disinfection robot helps the hospital a lot because it has an extra protective shield. This robot is run continuously in the corridor to help disinfect the air. Doctors at the No. 2 field hospital study how to operate the Phenikaa-X disinfection robot – Photo: C.Le Previously, students of Phenikaa University also made droplet shields for medical staff, medical staff at hospitals, treatment facilities, and concentrated isolation. Up to this point, 10,000 droplet shields have been sent to more than 30 localities, of which more than half have been transferred to the epidemic center Bac Ninh, Bac Giang. In addition, Phenikaa University also donated 10,000 bottles of Orezol water to the frontline medical staff in the fight against the epidemic.

At the Hai Phong remote control center, the basic features of the SCADA/DMS central software system have been fully exploited such as: managing the grid information model including managing all the main data of the network. control center, edit or create new single-strand diagram structure of TBA, color grid, edit graphics, batch data import, declare and map signals of equipment at TBA and devices on the distribution grid (Recloser/LBS/FI), set up audio and event alarms, simulate the status of equipment on the grid, store, analyze and exploit historical data on the system. In addition, Hai Phong remote control center is gradually deploying and building a smart grid subsystem (DMS) with grid computing applications such as: load reporting, distribution estimation, capacity flow calculation, fault locating and isolation, etc. Operations Engineer at Remote Control Center The conversion of manned 110kV substations into 110kV unmanned substations helps to promote the application of digital technology, innovate and improve the management and operation process of the power system. As of May 27, 2021, the Company has 07/24 110kV substations operating with unmanned criteria, 09/24 110kV substations operating in remote operation mode with on-site supervision. 70/90 devices (Recloser/LBS) on medium voltage grid are connected and controlled remotely from Hai Phong Remote Control Center. With 99% success rate of remote manipulation ( As planned in 2021 put 110kV and . substations control devices Recloser/LBS rest perform remote control) contributed to improving labor productivity, reducing system operating costs, improving reliability of power supply and ensuring safe grid operation. In early 2021, Hai Phong PC applied digital technology to develop software for automatic ground fault handling. The software is currently being put into trial operation. Automatic ground fault handling software is highly applicable, helping to automate the current ground fault handling process, reducing the time to find fault points, and minimizing the number of customers. affected by incidents, thereby reducing power supply reliability indicators SAIDI, SAIFI, MAIFI, improving power quality, avoiding confusion that may occur due to subjective factors of users caused by operation. Automating the troubleshooting process enhances worker productivity by reducing the dependence of the troubleshooting process on the operator. The software is a premise for the development and expansion of advanced applications in the process of modernizing the distribution grid towards operating the smart grid in Hai Phong city. With efforts and determination to realize the goal of digital transformation, Hai Phong PC in particular and the Power industry in general are gradually implementing innovation, creativity, digital technology integration and production management model. business, technical management, making an important contribution to the digital transformation roadmap of the Electricity industry in order to improve the quality of customer service, to meet the needs of socio-economic development of Hai Phong city.

Kangaroo’s air purifier model is currently discounted by 42% compared to when sold at the end of 2019, from 3.95 million VND to 2.29 million VND. The product has a capacity of 50W, suitable for spaces with an area of ​​​​20 – 30 square meters. KG30AP1 supports three wind speeds, uses a 3-layer filter including a coarse dust filter, an activated carbon filter integrated on the HEPA filter, which can remove PM2.5 fine dust. The machine also has a germicidal UV light system, timer features, comes with a remote control. However, the design of the device is still quite monotonous and does not support smartphone connectivity. Midea MAP-200GD41 (2.69 million VND) Midea’s air purifier sold at the end of 2020, currently discounted by 10%, from 2.99 million VND to 2.69 million VND. The product has a capacity of 50W similar to KG30AP1 of Kangaroo. MAP-200GD41 is equipped with a four-layer filter system, consisting of two layers of PET paper to filter coarse dust on both sides and a HEPA filter, activated carbon in the middle, allowing PM2.5 fine dust to be filtered. The device also has sensors that monitor air quality, four wind speeds, and ion deodorization. However, the product does not come with a remote control and also has the function of monitoring and controlling via smartphone. Karofi KAP-E114 (2.94 million VND) KAP-E114 launched in 2020, has a capacity of 43W, suitable for spaces under 30 square meters. The machine is equipped with a three-layer filter system including a coarse filter, an activated carbon filter, a HEPA filter, with a negative ion sterilization feature, which can filter PM2.5 fine dust. The operating noise level of the product is 58 dB, higher than the 30-40 dB level of comparable products. In addition, the machine also does not come with a remote control or connection to the phone. Xiaomi Mi Purifier 3C (2.79 million VND) Xiaomi’s air purifier model is currently sold by some electronics supermarkets for VND 2.79 – 3.29 million, down from VND 3.69 million when it was first launched at the end of 2020. The product has a capacity of 30W. , suitable for spaces of 20 – 30 square meters. Mi Purifier 3C is an upgrade of the previous 2C model, adding an intuitive LED display. The product is equipped with a coarse filter, an activated carbon filter and a HEPA membrane, which can filter PM2.5 fine dust. The device also has the function of connecting and controlling via smartphone via the Mi Home application. The operating noise level of the machine is 61 dB, higher than comparable products. Sharp FP-J30E-A (2.47 million VND) FP-J30E-A has a compact design, 50W capacity, is equipped with a HEPA filter, which can filter PM2.5 fine dust. The product also has the feature of deodorizing, bacteria with negative ions, automatically controlling the filter levels depending on the air quality. The noise level of the machine is at 45 dB.

The 43-inch version of the M7, a flagship product, the M7 display is now larger than 43 inches to maximize productivity and enhance entertainment, featuring an edge-to-edge design for an immersive experience time to work, study or play. With its 4K Ultra-High Definition (UHD) display, the 43-inch M7 can seamlessly switch functions, going from a dependable work device to an instant 4K entertainment hub with streaming apps. built-in content streaming, speakers, and built-in HDR10 technology to optimize every detail of 4K content. As part of Samsung’s sustainability program, the 43-inch M7 display includes a solar-powered remote control, made from recycled plastic, that is eco-friendly as it can be charged with a battery. Sunlight, light or a USB-C connection, Smart Monitor is fully equipped with USB Type-C ports, USB ports and Bluetooth 4.2 capabilities. Users can connect personal mobile devices with a quick tap using Tap View, project content via Screen Mirroring, or with Apple AirPlay 2. The display also supports Microsoft 365 apps, allowing users to view and edit documents and save them in the cloud even when not connected to a PC, thanks to built-in Wi-Fi. The popular M5 version is now available in a sleek and stylish white design for both the 27- and 32-inch models. The new color pairs perfectly with minimalism-inspired designs and adds a finishing touch to any interior aesthetic, perfect for those with a refined taste. The 24-inch version of the M5 has Full HD resolution making it the most accessible monitor series in terms of size and price. The compact size of this version makes it well-suited for small workspaces, or for customers who are simply looking for a good multi-function monitor. Voice assistants have been upgraded from these to allow not only Bixby but also other voice assistants like Google Assistant and Amazon Alexa. The Remote Access feature will also be updated to ‘PC on Desktop’ in June, allowing for a simple and secure connection between the display and external PCs for improved usability.

Rheinmetall will initially produce Lynx for the US military under a signed contract, then the products will be exported to friendly countries. When officially equipped, this will be the most advanced vehicle in the US Army and they are used to replace the Bradley fighting vehicle that is serving in this country’s army. Lynx combat vehicle. The Lynx combat vehicle is designed with a Rheinmetall LANCE modular turret equipped with a 30mm or 35mm automatic cannon with range stabilization and remote control. The turret and cannon are designed to allow the gunner to destroy the target from a maximum distance of 3,000m. The vehicle is equipped with an anti-tank guided missile (ATGM) missile system, a remote weapon control system, and a 3-barreled 7.62mm RMG7.62 coaxial machine gun. The secondary control weapon system is connected to the vehicle’s optoelectronic sighting system. The turret is equipped with two systems of electro-optical sights (EO), including a sighting system and a photoelectric sensor fitted with a stabilization system (SEOSS), integrated with a laser rangefinder, a Fire control system (FCS), SEOSS sighting system for the main weapon of the vehicle. Each EO sighting system can be used by the commander and the gunner, and the commander’s sight system allows for a panoramic view of the battlefield regardless of turret movement. The turret can be fitted with an enhanced situational awareness system (SAS) for the vehicle commander’s sight, a laser irradiation warning system (LWS), a turret independently controlled weapon mount, a turret enemy warhead sound identification system and C4I battlefield network command and control system. The gun fire control system, the LANCE turret digital coaxial machine gun allows the firing range to have almost absolute accuracy, a speed of 200 rounds/min. To enhance its survivability on the battlefield, Lynx is equipped with multi-layer armor plates, capable of blocking anti-tank projectiles, armor-piercing projectiles of various calibers, shrapnel, and homemade anti-tank mines (IEDs) ) and aviation bombs. The interior of the vehicle is also fitted with a spall-enhanced lining to protect crew members in conditions of armor penetration. The vehicle is enhanced with weapons that neutralize the shock waves of mines and homemade IED weapons, the seats are in a suspended state to reduce maximum casualties from mines under the vehicle. The vehicle can also be equipped with the option of an active defense system, a camouflage system, etc. All of these equipment are currently quite foreign to existing combat vehicles in the US military.

Securing the wifi router is the first step homeowners need to take to protect their smart home. During use, it is recommended to update the router’s firmware and always use a complex password for the wifi router. If the router manufacturer does not provide new firmware, users should consider replacing it. Just like not checking your bank account from public wifi, homeowners should avoid accessing smarthome from an open wifi network, but if you need to remotely access your home, use a private network. Using a separate wifi for smart home systems is necessary because sharing a wifi system has many potential safety risks. Smarthome prioritizes the system to be able to self-alert to abnormal intrusion to ensure safety, so users should use devices with automatic alarm setting feature. When there is an unusual intrusion, a notification will be sent to the homeowner’s phone immediately. In smarthome, not only home lock, smart home control applications need abnormal login warning feature, this helps homeowners recognize the risk of network attack to implement instant protection options. then. In a smart home, if there is a smart speaker with a screen or camera, users should consider turning off or covering the camera when there is no need to use it. This is similar to the fact that many people have a habit of covering the webcam on their laptop to avoid unfortunate images being recorded. Smart devices of unknown origin are at risk of being installed with spyware, which is easy to lose control and have data stolen. To be safe, it is recommended to use equipment from reputable companies, need to check the company history, product support period. From this information, a decision can be made whether to buy the product or not. And more specifically, it is very important to check the owner of the servers that will contain his home’s information because most smarthome devices used in the home communicate with servers in the cloud. In the process of studying the operation of the smart home control system, security experts have discovered serious security holes. Security flaws in the cloud infrastructure and remote code execution, causing a third party to acquire the “super user” right to access and control the smart home system. Immediately, the above findings were shared with smart home providers to immediately address these dangerous security holes. With a smart home, each device inserted into the smarthome can also be a point for network attackers to take advantage of, intrude on the home system …, so smart home security is very necessary for those who want Design your own smart home.

DHD manages and operates 4 hydropower plants (Da Nhim, Song Pha, Ham Thuan, Da Mi) are scattered in Ninh Thuan and Binh Thuan provinces, but the company’s headquarters is in Lam Dong province. Therefore, the management and operation of production and business meet certain difficulties and limitations. In 2012, DHD has researched and built OCC and put it into operation since December 2013 (for the Ham Thuan – Da Mi factory cluster) and from March 2014 for the Da Nhim hydropower plant cluster. – Song Pha. Each operation shift of DHD now only needs 2-3 people After more than 7 years of official operation, up to now, OCC has been operating stably, The transmission system , communication systems, data collection systems all operate reliably and effectively, without problems caused by subjective matters. All operations performed at OCC are timely and accurate as required by the National Dispatch and Regional Dispatch. Putting the OCC into operation has basically met the requirements of the Company’s development strategy in the centralized management model, promoting the efficiency of management and operation of electricity production. OCC has synthesized and provided fully and promptly information about plant equipment, hydrological situation in reservoir basins and related data for analysis and evaluation of production results. Export – trade, thereby setting up a reasonable price offer for power plants, effectively participating in the competitive power generation market. In addition, thanks to OCC, the Company has saved telecommunications channel rental costs by reducing transmission channels from 20 channels to only 5 channels. Mr. Do Minh Loc – Deputy General Director of DHD, said that with OCC, each shift on duty of the Company only needs to arrange the Chief of the Center’s operation shift and 01 operator, to command and operate factories . Currently, the Company continues to maintain the operation shift at the factories, each on-site operation shift is arranged from 2 to 3 people / 1 shift, monitoring, support, supervision and manipulation. devices in place. The arrangement and arrangement to increase the operating force in place will continue to be considered and adjusted in the coming time to suit the actual requirements. Will replicate the model According to leaders of DHD, the most difficult in building models is the human factor. To commissioning OCC system in December 2013, the Company cooperated with the National Load Dispatch Center (A0), organized training courses and accredited 5 heads of operation shift at company level to be eligible for command. operation and troubleshooting of power plants Da Nhim – Song Pha and Ham Thuan – Da Mi at OCC. At the same time, the procedure for operation and handling of equipment problems has been issued at Da Nhim, Song Pha, Ham Thuan, Da Mi factories and OCC equipment systems. The Company also cooperated with A0 to develop and issue the operational coordination process between A0 and the Company, in which agreed on the regulation of dispatching, mobilizing and coordinating operation, and troubleshooting of equipment at the power plants in the Company. Up to now, DHD’s human resources have been able to ensure efficient and stable operation of the OCC remote control system. With the advantages of existing human resources, in the coming time, the Company will continue to increase the application of digital transformation with advanced scientific and technological achievements into technical management, maintenance, and maintenance. equipment level. At the same time, will completely automate Song Pha Hydropower Plant; building unmanned model at Da Mi Solar Power Plant.

According to Hot cars, a Korean company specializing in manufacturing Hanwha Defense military equipment has just completed a robotic military car called “Unmanned surveillance vehicle 6×6 – USV 6×6”. In it, this new vehicle was applied in the military after research and testing has been completed. Discover the Korean army’s first 6×6 unmanned reconnaissance vehicle After the performance of a flying device called Valkyrie Combat Drone, recently, information about the Korean USV 6×6 car was announced. This is a reconnaissance and highly combat robot car that meets the combat requirements set by the Korean military. Accordingly, this vehicle has reached level 6 readiness (TR6) for key capabilities such as autonomous driving, obstacle detection and avoidance as well as target identification and destruction. USV 6×6 and intelligent military equipment and vehicles manufactured by Hanwha Defense Company. This robot car model can be controlled remotely and can also “operate independently” according to a preset command. Thanks to the radar system, sensors, and cameras, it can self-avoid obstacles and follow the programmed route even in the event of loss of communication with the operator. According to Korea IT times, the 1.5-ton vehicle is fully electric with the main task of supporting infantry soldiers in various combat situations such as monitoring, logistics, and evacuation. casualties and combat participation. Model USV 6×6 reconnaissance vehicle will assist infantry soldiers in different combat situations. With the reconnaissance version, this vehicle is also equipped with a series of remote-controlled weapons, also designed and manufactured by Hanwha Defense such as 7.62 mm machine guns, 12.7 mm large machine guns, even including automatic grenade launcher 40 mm. Previously, in 2019, another unmanned vehicle was also developed by Hanwha Defense called the MPUGV 4×4 but with less equipment. Royal Union (According to Carscoops, Hanwha Defense, Korea IT times)

As a unit of EVNNPT established on May 1, 1981, after 40 years of building and maturing, generations of leaders of PTC1 always care and invest in people, so that employees can own equipment, technology, ensure the power grid operation, safety, efficiency and quality assurance. Apply technology to check heat emission, detect the cause of the problem early Currently, the power grid managed by PTC1 is mostly transformers with large capacity (250MVA with 220 kV), (900 MVA with 500kV), along with oil resistance are the main equipment in the substations ( TBA). The company has widely applied online monitoring equipment to control the pressurized state under OLTC load, cooling system, current, pressure, oil … revealing the breaker of the company applying GIS, COMPACT technology, vertical compensation systems 500kV-2000A, new technology … is implementing the roadmap of gradually bringing 220 kV substations into remote control. The company is also the leading unit in the lead and acceptance of digital substations in Vietnam (220 kV Thuy Nguyen substation) and is assigned by EVNNPT to develop a process for accepting digital substations in the corporation. The development of technology and the rapid growth of the volume and scope of management requires that the qualifications of the staff be enhanced to meet the requirements. Accordingly, the company has identified training objectives for each specific target group with many types of training. At the same time, to alternate dispatching qualified, qualified and young staff members at substations, functional departments and regional power transmissions to the company’s technical department, while training in the form of mentoring, just participating in the work of acceptance of new projects to get an overview, synchronize and improve the level … Owning technology equipment The results of many recent years show that the company always ensures good implementation of the incident targets. The quality of human resources has been raised, creating conditions to arouse a movement to promote technical innovation initiatives in labor. In the past 5 years, the company has had 288 initiatives proposed to be applied in production, bringing an estimated value of several tens of billion VND, more importantly, initiatives and rationalization of production are all derived from practical needs of production. Thuy Nguyen 220kV substation (Hai Phong) is the first digital substation of EVNNPT managed and operated by PTC1. The appreciation of the human factor and creating conditions for each individual to improve their skills has helped the company to master equipment, technology and become more and more professional in management. By internal force, the company has successfully implemented a number of typical projects such as: replacing porcelain and accessories for the whole 220kV Hoa Binh – Ha Dong transmission line; overhaul and overhaul 500 kV transformers at Ha Tinh, Nho Quan and Hoa Binh stations … In addition to major repair works, the company has also successfully implemented many large-scale and complex construction investment projects such as: Raising the capacity of 500 kV capacitor line in Nho Quan- Ha Tinh; increase capacity of 500kV Thuong Tin substation; raising the capacity of the 220 kV transmission line Hoa Binh – Nho Quan … are all group B projects with total investment value of 300 to 450 billion dong. With efforts to care about people, the company has overcome many difficulties and always completes the assigned tasks. With the achievements in the past 40 years, PTC1 has been awarded many noble titles and awards by the Party and the State such as: Third Class Independence Medal in 2000; Labor Hero 2005; Second Class Independence Medal in 2007; First Class Independence Medal 2014.

Top 8 digital transformation trends in education (Image: FOW) 5. Incorporate IoT-GSI into a school environment Incorporating IoT-GSI into a school environment (Image: Built In) In the age of ‘smart’ devices, the Internet of Things or IoT can be found with increasing popularity in our lives. Not just smart phones, technology makes everything from plugs, sockets to remote controls “smarter”. In education, this trend has begun to help connect schools and students in a whole new way. On one level, the IoT can benefit educational campuses by helping schools improve security and comfort features while keeping costs under control. Smart devices will help the school provide the best learning experience for students. For example, smart devices will control and adjust the most suitable air-conditioning temperature, or automatically adjust the lighting system to bring the best light for students. IoT can also help schools stay connected with students, helping students better track their progress. Monitoring students also helps teachers know when students are off. For preschools, this information can be used to let parents know if their child has an unexpected absence and provide better safety and communication about the issue. 6. Security on digital devices Security is extremely important in today’s tech age (Image: Forbes) With technology rapidly becoming a key feature in the daily lives of students and teachers, security has become another essential trend in the digital education revolution. Schools collect a lot of information about students, from personal data to their scores. This information should be strictly confidential. Schools need to ensure that they have a secure means of allowing students to submit personal information. This becomes even more important in cases where students can take tests or assessments online. Security breaches can be damaging to individuals and organizations in general, making them a key priority and trend throughout the digital transformation process in education. 7. Digital Citizenship Students need to know how to interact online in a polite and civilized way (Image: OLC) Since these digital transformation trends have affected students in many different ways throughout their lives, students need to know how to interact politely and civilly online. This is similar to how students learn to be professional in an office setting. Schools have begun to recognize this importance, and teaching students to follow the principles of digital citizenship has become an increasingly important trend. When educating students to become a good digital citizen, schools empower students to take full advantage of technology. To see the best results from digital citizenship instruction, organizations should aim to make it part of the culture for both students and teachers. These guidelines guide people to behave properly when studying online, which can help students succeed in their classes and in professional settings. 8. Big Data Big data (Photo: Industrial IoT) Schools have long gathered a lot of information about their students, including their demographics, grades, and grades. Big Data gives them the opportunity to take this information further and use it to better understand the student learning process. Big Data helps track large amounts of data, uses algorithms to find useful information about students quickly. This includes convergence of many different data sources. Schools may have gathered a lot of useful information about students in the past, but over time it can be “forgotten”. Big Data will help schools solve that problem, thereby being able to manage their students more closely. Big Data’s ability to synthesize and analyze data will bring a number of benefits to the school such as: Completion of each student’s program, finding outstanding students in specific fields. etc .. The change towards a modern, digital world has had a significant impact on education. Schools in many countries have begun to recognize that technology can provide them with a number of new benefits and strategies for educating their students more effectively. It is expected that in the near future, digital transformation will be widely applied in schools around the world.

In 1969, the Soviet Army received the T-64A variant with the 125 mm cannon instead of the 115 mm one. From 1976 to 1985, the T-64B was produced in Kharkov with an improved fire control system and the ability to launch a guided missile through the barrel. In principle, the manufacturer has managed to get rid of many previously defined problems. Two years later, the T-64 appeared with a version equipped with explosive reactive armor Kontakt-1. It is these means of fighting that are currently the basis of the Armed Forces of Ukraine. Ukrainian T-64E main battle tank carrying 23 mm GSh-23L cannon In 2004, the Ukrainian Ministry of Defense adopted the T-64BM “Bulat”, which was developed in the Kharkiv design room for mechanical engineering named after AA Morozov. A total of 85 MBTs were ordered but it turned out to be unsuccessful. Its special edition – the T-64E was created by the Kharkov armored repair plant. Engineers suggest using multi-channel viewfinder with gunner thermal camera and captain’s panoramic viewfinder. Firepower is enhanced by the 23 mm GSh-23L double-barrel air cannon with a ammo base of up to 600 rounds, accompanied by a remote controlled 12.7 mm anti-aircraft machine gun. This weapon can be used by any member of the crew, including the driver. Protection has also been increased thanks to the Nozh explosive reactive armor and a high-speed fire suppression system. Meanwhile, the vehicle’s weight increased to 42,500 kg, the engine capacity also increased to 850 horsepower. Despite the announced new possibilities, the Ukrainian Armed Forces Command is not interested in the amendment. Such tanks would be too complicated and expensive. Also, the repair company itself is not capable of mass-producing them. As a result, only one prototype was born and until recently was rusting in the storage.

Although just released not long ago, but smart screens M7 and M5 of Samsung have created a great resonance and quickly received by users for “the right product” and “the right time”. Many technology followers commented that these two products inherit many advantages of Samsung screen and technology, but the breakthrough in this product line is the integration feature, which addresses the needs of working and studying. , entertainment for the majority of today’s youth. So what makes this line of Samsung smart monitor products that you cannot ignore? M7 and M5 – The screen says “no” to the PC Smart screens M7 and M5 operate independently without a computer, meeting the needs of working and learning remotely in the current epidemic situation. Working from home like in the office with now Remote Access helps users access to remote computers, easily manipulate and access data, even edit directly in the “cloud” thanks to Microsoft 365 integration. available. This is cloud storage with a large capacity, perfectly suitable for storing information and accessing anytime, anywhere. Many new useful features, meeting the needs of learning and working remotely. Smart displays M7 and M5 are ergonomically designed with USB 2.0 and USB Type C ports, with Bluetooth feature, allowing other devices such as keyboards, mice, external speakers and projectors to be connected when needed. . Therefore, this product line does not need to use CPU and is considered the culmination product in the “new normal” period with many outstanding features, meeting the diverse needs of users in working and studying. practice and entertainment anywhere. Streamlined wireless screen Unlike previous products, M7 and M5 smart screens have adopted many modern technological innovations, eliminating many cumbersome plugs or screens. Instead, it is a new generation of screens, lighter, smarter. In addition to the physical connection ports like normal computers such as HDMI, USB, especially USB-C ports, M7 and M5 smart displays also have the ability to connect wirelessly via Wifi and Bluetooth. Just one touch with Tap View, users can access all content on the phone instantly played on this smart screen. Apple devices can connect to M7 and M5 displays via the Air Play 2 feature In particular, the feature of Air Play 2, App Casting or Screen Mirroring helps connect Apple devices to the screen, providing a complete experience that is not different from Samsung or Android devices. Samsung’s SmartTV application store is also integrated for this product line, comes with speakers and a remote control (Remote control) allowing users to switch work and entertainment with just a few buttons. Inheriting outstanding technology from Samsung Samsung is considered a “technology giant” with a leading position in the display market with many breakthroughs, such as QLED screens, recently upgraded to 8K or curved screen with optimized angle. user’s view. Smart displays M7 and M5 have voice support and control and Bixby 2.0 virtual assistant, and are integrated with SmartThings ecosystem like Galaxy phones or Samsung Dex. Therefore, users can comfortably experience all the features on the computer and increase the usability. Monitors M7 and M5 are considered by tech fans to be “delicious and cheap” because of the reasonable price with many suitable gaming features, such as the Ultrawide Game View 21: 9 for viewing angle. Wide, sharp and true, delivering smooth and satisfying gaming moments. In addition, users can watch movies, listen to music on Youtube and other entertainment features provided by Tizen are built into the M7 and M5, like a Smart TV. The subwoofer system and design on both sides of the bezel make the experience more vivid, perfect and standard in every millimeter in both sound and picture. It can be said that Samsung’s M7 and M5 smart screens are a right choice for those who have a high demand for features but do not have a lot of money. True to what Samsung is aiming for, an all-in-one (All-in-one) technology, this product line offers a compact in design and is full of useful features. According to thanhnien