The US-EU reached a historic agreement to settle a 17-year dispute involving Airbus and Boeing. (Source: Getty Images) US officials confirmed that the country and the EU had reached an agreement to end a dispute over government subsidies to the world’s top commercial aircraft manufacturers at the US Summit- EU in Brussels. The two sides agreed to suspend the tariffs for a period of five years. US Trade Representative Katherine Tai said the deal “resolves a longstanding trade issue in the US-EU relationship”. “Instead of fighting one of our closest allies, we are ultimately fighting a common threat together,” Ms. Tai said. Under the agreement between Airbus-Boeing, any passenger aircraft built in the future will not be allowed to receive subsidies from the government. In addition, these two allies also pledged to settle another dispute related to imported aluminum and steel products. According to the CNN The fact that the EU and the US reached an agreement to end the dispute and impose a “eaten patty” tax for the past 17 years is a positive signal for bilateral cooperation under President Joe Biden. Immediately after the news was announced, shares of Airbus group rose 1.4% on the Paris exchange. Meanwhile, shares of Boeing have not changed much. (according to CNN)

However, since the case was recorded at Changi Airport at the end of April, the COVID-19 wave broke out again in the lion island nation. Since April 26, the country has recorded more than 200 community infections. This number in March was only 9 cases. From the initial infection, Changi Airport is now the largest outbreak in Singapore with more than 70 cases. Singapore recorded more than 200 community COVID-19 cases since April 26. (Photo: Straits Times) Mr. Ong Ye Kung – co-chair of the Singapore Inter-Ministerial Committee for COVID-19 Prevention and Control said that the second wave F0 could be transit travelers. “Most of the cases at the airport are concentrated in the area with the flow of passengers from high-risk countries including Southeast Asia, in the baggage and immigration control area. In that area, The staff went to have lunch and dinner at the food court and commercial service area in the second basement of T3 station, from which we determined that they had infected people when they came here.” this man said. After detecting the cluster of infections, Singapore immediately blocked Changi Airport. But medical experts in this country believe that the virus has spread to the community before the blockade order. Facing the complicated epidemic situation, Singapore decided to further tighten social distancing measures from May 16 to June 13. According to the new regulations, the number of people allowed to gather will be reduced from 5 people to 2 people, each family can only receive 2 guests a day. Employees are forced to work from home, restaurants and public food centers will temporarily suspend on-site dining, serving only take-out food. Shopping centers further reduce the number of people entering and leaving. Attractions, exhibitions, museums and libraries will reduce their capacity to 25% from the current 50%. Similar to Singapore, another anti-epidemic model is Taiwan are also struggling to cope with the second wave of COVID-19. The island has gone 253 days without recording any domestic infections, but now the number of COVID-19 cases is increasing sharply. In 2020, Taiwan, although bordering China, recorded less than 1,000 cases. Guardian call this an extraordinary number. However, on May 14, Taiwan’s health authorities reported 29 “domestic” cases. This number increased to 180 on May 15, 206 on May 16, 333 on May 17 and 240 today. In just one week, the number of COVID-19 cases in Taiwan increased by more than 40%. Medical staff prepare to test a person suspected of having COVID-19 in Taiwan. (Photo: Reuters) Cracks began to appear in the anti-epidemic wall of Taiwan at the end of April when 2 pilots of China Airlines were confirmed with COVID-19. The pilots flew together on a cargo flight to the US and were quarantined at another Novotel upon their return to Taiwan. By early May, dozens of China Airlines pilots, flight attendants, their relatives and hotel staff were confirmed to have COVID-19. However, before these cases were discovered, some went to restaurants, bars and clubs. These cases led Taiwanese to criticize the government’s decision to reduce the quarantine period for crew members from 5 to 3 days in mid-April. After an investigation, the Novotel hotel was discovered to let a number of quarantined pilots share the same building with regular tourists. During the time when Taiwan stops welcoming foreign guests, Novotel Hotel opens incentive programs to welcome visitors on the island. Dr Chiou Shu-ti, a former health commissioner of Taipei, said authorities were “playing with fire” by easing quarantine requirements. After recording the number of cases skyrocketed, the COVID-19 warning in Taipei and New Taipei was raised to level 3 in a 4-level scale, People must wear masks outside, not to gather outdoors for more than 10 people. Cinemas, sports centres, libraries and entertainment venues were also forced to close. It is not clear how the new drastic measures will help Taiwan and Singapore overcome the new wave of the epidemic. But experts believe it will take weeks or even months for these two places to once again defeat COVID-19.

Accordingly, on May 28, the Australian Federal Foreign Investment Commission (FIRB) approved the contract to buy 100% of the shares of the Roper Valley iron ore mine project of the Australian subsidiary of Hoa Phat Group. . Roper Valley iron ore mine has estimated reserves of 320 million tons. After the transaction is completed, Hoa Phat is the owner of the Roper Valley iron ore project with an estimated reserve of 320 million tons and a mining capacity of 4 million tons/year. Hoa Phat said that the group will continue to research to invest in buying some new iron mines in Australia, in order to ensure a long-term supply of at least 50% of the Group’s iron ore demand (equivalent to 10 million tons of iron ore). /year). Besides, the raw material that constitutes up to 30% of the steel price is coking coal, which is currently imported by Hoa Phat from Australia – the world’s largest coking coal supplier market. The Group is studying to buy a few Australian coking coal mines in the future to gradually become self-sufficient in this important production material. Talking to Dat Viet, metallurgical expert – Prof. Dr. Pham Pho assessed, this step of Hoa Phat is very wise, helping businesses to proactively source raw materials in a stable and long-term way. According to him, normally Australia rarely sells the whole mine, but now, due to political and trade tensions with China, Beijing has limited the purchase of iron ore from Canberra, on condition that Australia sells the whole ore mine to Vietnam. should be easier without raising prices. Roper Valley iron ore mine has estimated reserves of 320 million tons. Photo: Hoa Phat “With this step, Hoa Phat can take the initiative in the source of raw materials, only have to worry about exploitation and transportation. Enterprises must send people to supervise and operate, along with a team of workers in your country to exploit. Most of Vietnam’s steel mills rely on scrap iron for production. However, the current scrap iron and steel is limited, the price has increased, the quality is poor, not to mention the difficulty in transportation. It can be said that enterprises producing steel by electric furnace technology, using scrap iron will face many difficulties in the future. Therefore, this step of Hoa Phat is very important,” said Professor Pho. The expert also highly appreciated Hoa Phat’s plan to buy coking coal mine. However, he also noted, buying coal mines to produce coke is very difficult, the production process of coke costs a lot of money. Therefore, it is often easier for a business to cooperate with a partner in Australia than to be completely self-sufficient. “Of course, businesses choose depending on specific conditions to produce coke. To produce coke, it is necessary to use fat coal, not coal. The carbon content in it is high and contains a certain amount of oil. When heated, , the amount of oil evaporates, leaving pores. These pores will make the air flow, not clogged and it will provide fuel continuously. If the business can buy ore mines, and at the same time associate with partners in Australia to produce coke, it is very good. This depends on the operating ability of the business, if you want to produce cups, you must have good experts, and ore is simple – just dig, treat and bring back. If the direction of the business is to buy coke mines, then transporting coke to Vietnam, coking production in Vietnam is better and also simpler, because the production process of coking coal has many other products. For example, when coking, the gas that rises contains a lot of fuel, in which CO is very high, gives high value of electricity, provides for the process of electricity production, boiler heating…”, Prof. TSKH Pham Analysis Street. He also noted that producing steel from ore has a more complicated process than producing steel from scrap (iron scrap) and is also cheaper. The quality of steel depends on the manufacturing process. Even scrap steel wants to produce good steel, it must be carefully selected and classified. Currently, scrap steel in the world is still small, with many impurities. When buying, manufacturing enterprises must carefully select and classify, which costs a lot of money. Regarding the problem of environmental pollution treatment, Professor Pho said that blast furnaces are more complicated than electric furnaces that use scrap iron and steel. When the blast furnace emits gas, it is necessary to invest in equipment to recover coal dust for reuse. Similarly, the exhaust gas contains a lot of CO, which if left to fly into the environment is very toxic, so it must be recovered to put back to burn in electric furnaces or furnaces. This does not mean that electric furnaces do not have to deal with environmental pollution. The electric furnace itself must also be equipped with equipment to capture waste gas, coal dust and filter. Because technology and equipment to deal with environmental pollution are very expensive, according to Prof. Pho, it is important whether steel factories are willing to invest or not.

According to the GQ Germany The strap plays an important role in the aesthetics and utility of the watch. Depending on the design and material, they give the wearer an elegant or sporty look. Oyster Strap The Oyster has been named the most influential, iconic and distinctive bracelet in the watch industry. Many consider it to be the definition of a sports watch. The Oyster is the Swiss watch brand’s longest-lasting strap. Photo: Hodinkee. It’s been around since the late 30s. It’s the brand’s most casual and sporty model. Therefore, it often appears on watches that are made specifically for activities such as diving, racing, etc. However, Rolex is not the first brand to produce this bracelet. The Swiss brand commissioned Gay Frères – the strap supplier – to manufacture the Oyster. Rolex depends on Gay Frères for a long time. It was not until 1947 that in-house production began. Oyster is made of metals such as steel, gold, rose gold… It consists of three interlocking links. The middle link is larger than the two outer links. It is closed with one of the Oysterlock, Oysterclasp and Crownclasp buckles. Jubilee Strap This is the first strap model of the Swiss brand. It was launched in 1945 with the Oyster Perpetual Datejust. The Jubilee name refers to the brand’s 40th birthday. Jubilee cord has been improved and more complete. But its design has barely changed over the years. Initially, it was only available in solid gold. The range was later expanded to include steel and a two-tone variant (steel and gold). Today, it is made from almost any metal, except gold and platinum. The first Jubilee models had problems with stretch. They lose their stiffness over time and become loose and stretchy. The Jubilee has rows of semicircular links, giving it more luxury than the Oyster. The increased number of links helps Jubilee catch the light beautifully and have an almost jewelry-like appearance. Over the years, these bracelets have made their way into several professional Rolex designs, including the GMT-Master. Jubilee’s linked rows give the wearer a luxurious look. Photo: Picuki. President Strap President was introduced in 1956, specifically for the newly released Oyster Perpetual Day-Date watch. This name appeared in 1965 when President Lyndon B. Johnson (USA) wore a yellow Day-Date. It is always considered as the most unique and elegant metal bracelet because it is made from precious metals such as gold, rose gold, white gold, platinum. It is also used for some all-gold versions of the Lady Datejust. With three round links, it is considered the most refined of the brand’s bracelets. President is actually a combination of Oyster and Jubilee. Experiencing a number of changes as well as improvements, the design and styling of the President more or less remained the same. President is considered the most elegant bracelet of the Swiss brand. Photo: Rolex. Pearlmaster Strap Like the Jubilee, the Pearlmaster launched in 1992 consisted of five linked rows. This is also the time when the Yacht-Master model was released. It is made from metals and precious stones, giving it a similar look to jewelry. The case is exclusively cast in 18 carat gold, white gold or Everose gold. It is decorated with diamonds, rubies and sapphires. This strap represents some of the most expensive products in its entire portfolio. The Pearlmaster represents the brand’s most luxurious design. Photo: GQ Germany. Oysterflex Strap Customers’ styles and preferences are always evolving. The introduction of the Oysterflex bracelet in 2015 was an intriguing addition to the world of luxury watches, marking a new era for the Swiss brand’s bracelets. It was originally used for the Yacht-Master line of watches, and was later combined with the Cosmograph Daytona and Sky-Dweller. At launch, the company claimed that the band features an innovative design that builds on the strength and versatility of previous metal bracelet models. This strap is equipped with a small pad on the inside to create comfort for the user. The Oysterflex is more elastic and sportier than the metal band. Photo: Monochrome Watches. 5 things men need to know to wear a beautiful watch Watches are an effective assistant in terms of time, helping to enhance a stylish look for men.

The legendary Titanic will be reconstructed in China, in the hope of becoming a tourist attraction. The biggest difference with the “original” Titanic is that the replica ship will not set sail. It is located by the river, at an amusement park in Sichuan province and about 1,000 km from the sea. A factory building a replica of the Titanic in Sichuan province, China. To stay a night on board and enjoy 5-star service, visitors need to pay about 150 USD. The song “My Heart Will Go On” performed by Céline Dion will play again during the tour. Everything from the dining room to the luxurious cabins and even the door handles is in the style of the original Titanic. Facilities such as a banquet hall, theater, observatory and a swimming pool will also be restored on board. Inspired by director James Cameron’s 1997 film Titanic, the project owner said he wanted this replica to last another 100 or 200 years, to preserve the memories of the Titanic. He also hopes to welcome about 5 million visitors each year to visit this replica ship. However, the opening date has not yet been set. The replica ship will have the same length as the original, with a length of about 269 m. Construction will take about six years, longer than the previous Titanic. This plan is expected to require about 23,000 tons of steel, hundreds of workers and 1 billion yuan (about 153.5 million USD). “The greatest meaning of building this ship is to continue and inherit the great spirit of Titanic. I will invite Jack, Rose and James Cameron to the inauguration ceremony,” the investor said.

American Stryker armored vehicle. (Source: Worldnewsplatform) These wheeled armored vehicles were developed in the early 2000s, but when used in combat for the first time in Iraq, it revealed the design imperfections of the whole series. Limitations The Pentagon has been using the Stryker armored vehicle since 2002, developed on the basis of the Canadian LAV III armored vehicle, a modernized version of the Swiss-made Piranha, designed in the 1970s. The American armored personnel carrier did not differ much from the prototype – the body and general layout remained unchanged. Slightly increased height, reinforced armor protection and adjusted bottom shape. The crew consists of two people, the troop compartment can accommodate 9 soldiers. The 350hp diesel engine allows the front-wheel-drive Stryker to accelerate to 100 km/h on the highway. Fuel enough to operate nearly 500 km. The front armor can withstand the impact of 14mm armor-piercing bullets or 155mm shrapnel. The side shells and rear end well protect against 7.62 mm bullets. Standard armament is a 12.7 or 7.62 mm Browning machine gun. A 40mm automatic grenade launcher can be mounted. Several versions were developed: self-propelled 120 mm mortar, reconnaissance vehicle, command staff vehicle, engineer vehicle and ambulance. There was also a heavily armed version – a 105 mm anti-tank gun, aimed at attacking fortified positions, bunkers, and armored vehicles, but the Pentagon soon decided to remove it. this release, as they identified problems with the gun and the automatic loader. The US military calculated the costs and came to the conclusion that there is no benefit in upgrading self-propelled guns. Replacing the heavy Stryker with the portable Javelin anti-tank system proved much easier. In the early 2000s, the Pentagon ordered more than 2,000 armored vehicles – immediately addressing the shortage of mobile infantry transport. At the same time, build specialized motorized brigades (Stryker brigade combat team, SBCT). Each such unit has about 4.5 thousand soldiers and officers, using 300 wheeled armored vehicles of various versions. From a tactical point of view, the SBCT is located between the highly mobile Humvee mechanized infantry and heavy tank groups. These brigades are thought to be capable of rapidly deploying and effectively dealing with various combat missions anywhere in the world. The transportation of personnel and equipment is carried out by C-130 Hercules transport aircraft. In 2004, the first unit was sent to Iraq. During that year, the Americans studied the tactics of using Stryker brigades in wars. The command then noted the high efficiency of armored vehicle units, especially in urban combat. However, soldiers complained of design flaws, insufficient firepower, and weak armor. Subsequent reporting by a Pentagon special committee almost led to the program’s closure. It turns out that armored vehicles only work well on flat roads and highways – on rough terrain, the car is covered with mud or sand. Motors are often used at high speeds, causing them to fail quickly. The Stryker is significantly heavier than the Canadian and Swiss vehicles. Another serious miscalculation by the designers was armor, which only provided good protection against small arms. In real combat, the enemy prefers to use anti-tank guns. RPG anti-tank bullets easily penetrated the body of the vehicle, so the vehicles had to urgently equip the additional wire mesh. In addition, due to the large center of gravity, vehicles often overturn when hitting obstacles or mines. Furthermore, seat belts did not secure people properly, causing several soldiers to die. Chain of problems Defects are corrected. For example, anti-tank bulletproof nets and suspended steel housings were installed originally from the factory. As a result, mass increases and complications arise during air transport – some modifications that are beyond the carrying capacity of the transport aircraft. The new electronics and night vision goggles don’t make much of a difference either. The Stryker is still a car with a host of unresolved problems. In addition, the modernization required additional funding for the entire program. However, in the US military, there has long been a problem of equipping the army with armored vehicles to meet the requirements of modern warfare. The Pentagon tried several projects, but to no avail. In 2004, American generals carried out a major reorganization of the military. As part of the Future Combat System (FCS) project, they decided to create a line of manned and unmanned versions of armored vehicles. Hundreds of billions of dollars have been spent, the US planned to deploy the first brigade using new vehicles in 2015 and form 15 units by 2030. However, the program was unexpectedly closed. – according to official information, regarding the change in US defense strategy. After that, the Americans launched a promising infantry fighting vehicle project – Ground Combat Vehicle (GCV), which was supposed to surpass the outdated M2 Bradly vehicle in terms of protection, and lighter, more compact and more maneuverable. The resulting GCV turned out to be too expensive for mass production – in 2014 all work was suspended. The US is currently working on another program – the Optionally Manned Fighting Vehicle (OMFV), which involves the creation of a crawler infantry fighting vehicle with artificial intelligence and remote control. . The Pentagon now has to transport infantry using the old M113 and M2 Bradly, as well as modernize the Stryker vehicle. Updated version A1 introduced a few years ago: 30mm cannon, reinforced armor, more powerful engine, transmission. A low-altitude anti-aircraft vehicle variant is also offered. But whether this Stryker vehicle will become more suitable for combat than previous versions is still unclear. Actually, the design is still the same. (according to Sputnik)

Floatwing: This floating house is not only sturdy, but also portable around the world. Floatwing has been built from the ideas of a group of designers Friday SA. With a detachable, modular structure, you can transport your home where you want it. Floatwing also has a wine cellar, BBQ area and roof terrace. Talking about the solidity of the house, the architects used environmentally friendly materials such as wood, plastic cork. In addition, the electricity consumed is also taken advantage of by solar energy. Floating House Lake Huron, Ontario: Located in the Great Lakes, this floating house is built on a steel pontoon boat that can float up and down according to the lake level. Inspired by the surrounding landscape, the house is designed with natural colors. Inside the house are white walls and large windows that can look out to the outside. Lake Union Float Home, Seattle: is part of a collection of unique floating houses in Seattle. Inspired by the warehouses on the ports of the previous centuries, the architects created a modern house with classic features such as beams, steel beams, concrete columns or spiral stairs. snails. UFO: These are not images of imagination at all, but man-made ships with fiberglass structures. These floating spherical houses can reach the highest speed in the world. about 3-5 nautical miles. The hull is made of fiberglass and is protected by seals that help keep the ship afloat and stable on the water. An Italian company is behind these designs and they claim the ship will never sink even in rough seas. UFO can even be “self-sufficient” because it can turn salt water and rain into drinkable water. This UFO house also uses solar energy and water turbines to generate electricity. Watervilla Weesperzijde, Amsterdam: Located on Amsterdam’s Amstel river. This luxury villa has an all-glass front and a terrace running the length of the house. This is also an extremely modern house for those who are connoisseurs of technology. Watervilla de Omval, Amsterdam: Floating houses are nothing new in the Netherlands because many areas are below sea level and there is always a risk of flooding. The 2120 square feet (197 square meter) home features rounded corners, a glass front and a roof terrace for viewing the surroundings. ParkArk Oog – in – Al, Utrecht: Huge windows and skylights fill the whole house with natural light. Muntboot Utrecht, Utrecht: Muntboot is located on a peaceful canal of Utrecht, a Dutch city. This split-level house can also be turned into a work of art thanks to the inclined wooden slats with different widths creating the facade architecture and depth for the house.

Da Tay A Island has an important position on the Truong Sa archipelago. Not only that, the island is also a solid fulcrum, helping fishermen to reach out to sea and cling to the sea. Each soldier is an “iron shield”, guarding the peace for the sacred sea and islands of the Fatherland. Young soldier Dang Trong Hieu (from Ba Ria – Vung Tau) who is on a mission on Thuyen Chai C island said: The love of the sea and islands is the driving force for him and his teammates despite all difficulties and hardships to carry out. well protect the sovereignty of the sacred sea and islands of the Fatherland. The square eagle tree on Thuyen Chai island C. Officers and soldiers on the island said that, nearly 4 years ago, the new tree was about 2m high, and the canopy was about 1m wide. A moment of relaxation at the Multi-Cultural House on Da Thi Island – a work awarded by the Party Committee, the government and the people of Hanoi. In the midst of the immense sea and sky, Da Nam Island is firm and steadfast, firmly defending the country’s sovereignty over the sea and islands. The tops of spinach of the soldiers at Thuyen Chai C island rose high in the sun and wind of the sea. Although it is difficult for trees and flowers to grow well in the sun and wind, in addition to the hours of training and ready to fight, the young soldiers also deployed a very beautiful youth flower garden. The Truong Sa soldiers were on duty day and night to guard and firmly protect the country’s sovereignty over the sea and sacred islands. Sunset on Co Lin island. Along with other islands of the Spratly archipelago, Co Lin island forms a solid and continuous battle, is the outer shield protecting the sea and islands of the Fatherland.

Ceramic watch cases date back to the 1960s. When the Rado brand launched its first ceramic design in 1962, many users were skeptical about the product’s need for use. Damian Otwinowski – vice president in charge of Swiss watches – says ceramic is a good alternative to steel or gold. “Ceramic is resistant to scratches, giving the watch a luminosity. It reflects light better than steel and does not discolor from exposure to the sun.” Ceramic is not a fad that has been around for a long time in watchmaking. Photo: Watchnista. In addition to being scratch-resistant, ceramic also helps prevent dents and is much lighter than steel. Rado was the first brand to produce ceramic-cased watches. After that, Omega and IWC used this material in the 80s and 90s for many products. In 2000, Chanel was the first brand to offer watches with both ceramic cases and bracelets. This year, consumer demand for ceramic watches spurred a more lasting change. “I think it’s an aesthetic preference that creates a sleek yet sophisticated look,” says Damian Otwinowski. 1. Hublot Big Bang Integral Hublot produces quite a few products with ceramic cases. In particular, the Big Bang Integral boasts an integrated bracelet with links that are polished and finished in ceramic and satin. The matte gray skeleton dial showcases the beauty of the self-winding Unico 2 chronograph movement. In addition, the blue color helps the wearer to stand out but is equally sophisticated. Hublot Big Bang Integral is currently priced at $23,100. Photo: Time and Watches. 2. Omega Seamaster 300M Black Black Products made from ceramic may be subject to fingerprints. In the case of the Omega Seamaster 300M Black Black, engineers used a variety of technical solutions. They abrade the case with a laser on the bezel to create a fingerprint-resistant texture. The case, dial, bezel, buckle, crown and helium escape valve are all made from black zirconium oxide ceramic. If you are a fan of this color scheme, this is the right choice. The Omega Seamaster 300M Black Black is priced at $8,650. Photo: Monochrome Watches. 3. True Automatic Rado If you are looking for a low-cost ceramic watch, this is a good option to try. The product has a scratch-resistant shell, light weight but still enhances the sturdy appearance. The Rado True Automatic is available for sale on the brand’s homepage for $1,900. Photo: Malwa Polytechnic College. 4. Zenith Defy 21 Felipe Pantone Edition Felipe Pantone – Argentine visual artist, Spain – has collaborated with the Zenith watch brand to create a product that demonstrates high-frequency time measurement through light and color. Inspired by the beam of light found in much of Felipe Pantone’s work, the hour and minute hands of this model create a deliberately distorted look. In particular, each Zenith Defy 21 Felipe Pantone will come with a certificate of authenticity signed by artist Felipe Pantone. The Zenith Defy 21 Felipe Pantone is priced at $19,100. Photo: Monochrome Watches. 5. Audemars Piguet Royal Oak Perpetual Calendar White Ceramic Audemars Piguet watches are produced in unlimited numbers. It has a brushed and polished white ceramic exterior and is water resistant to 20 meters. In addition, this is the product with the most beautiful ceramic strap ever produced by the manufacturer. Finishing the bracelet alone took 30 hours, 5 times more than the steel version. Audemars Piguet Royal Oak Perpetual Calendar White Ceramic sells for up to $106,000. Photo: Bloomberg. 5 things men need to know to wear a beautiful watch Watches are an effective assistant in terms of time, helping to enhance a stylish look for men.

Located in a central location on Le Duan Street (Ha Tinh City), Light Coffee has a rustic but no less modern space. The project was constructed within 8 months, including 2 main materials: brick brick and pre-engineered steel frame. The facade of the building is designed with a way from red brick. Coarse, randomly assembled brick walls ensure a solid structure but still ensure aesthetics The stairs are simple but impressive by the pre-engineered steel spiral design. In general, the staircase looks like a large bird cage in the center of the restaurant The roof is roofed with bricks at the top in coordination with the glass and hot-iron below. Both create a unique and make the most of natural light but do not cause heat in summer weather. The cafe is built on an area of ​​118m2 with 2 floors. In addition to the coffee tables, the first floor is also the barista of the bar. The second floor impresses customers with open space from natural light and the system of green trees is arranged appropriately. Not only impressed by its unique appearance, the cafe also attracts customers with green space, prioritizing connection and closeness to nature. The aisle is used to put the coffee table with the view overlooking the outside. Guests can enjoy a drink, while watching the street A corner of the pavement of Light Coffee The lighting system is made from bamboo, creating an overall harmony with the main materials of the restaurant According to the owner of the coffee shop, he himself had to set up the recipe many times to come up with a recipe like the restaurant. The bar space is sparkling at night

The project is located in Long Bien district, Hanoi, has the structure of a townhouse with two open front and back sides. Design architects give an image of a modern house that is still close thanks to the wood material in the gate system and the facade. Because the house is facing west, the wooden bar is arranged to both contribute to prevent heat radiation and also play a role in shaping the building. Taking advantage of a part of the ground floor for the garage, the roof garden of this architectural block creates an open green space with trees reaching high in front of the house. On the first floor is the space connecting the living room – kitchen and dining room. Stairs to the upper floor are designed nestled on one side to create a wide open space. Modern style interior with simple lines. Main color is neutral. Wood is used in a reasonable amount to bring intimacy but still elegance. The kitchen and dining room are located at the back connecting to a small back garden. Modern kitchen cabinets with white-brown color scheme create harmony. The house is also equipped with an elevator in the corner of the house to increase convenience in use and living. Stairs with slender, graceful steps. The second floor is a children’s space with two bedrooms. Interestingly, the long staircase upstairs stops here and is followed by a new staircase in another position that winds across the water. Next to it is the living and playing space of the children. This is an interesting and expensive highlight in the interior of the house. The use of the dark color of the bottom of the water surface feels deep, but actually the water is very shallow for safety. The third floor is the parent bedroom which is arranged as a mini apartment with different functional areas: sleeping, toilet, wardrobe and dressing. All arranged in sequence and handy. The third floor is the parent bedroom which is arranged as a mini apartment with different functional areas: sleeping, toilet, wardrobe and dressing. All arranged in sequence and handy. Wood material is almost carpentry, revealing, giving a warm, close feeling. Spacious bathroom opens up to a garden with green trees./.

Located in a newly developed area on the southern edge of the city. Da Nang, Maison Vespa is a 1-storey house with an area of ​​5x20m, including 1 living room, kitchen area, 1 bedroom and 1 bathroom. Designed in the form of a tube house, the Maison Vespa is a simple box, using local standard construction – reinforced concrete frame with prefabricated blocks, small in size, using space efficiently and guaranteed. good price. Da Nang is hot and humid for most of the year, so the house is designed in a sustainable, ecological direction, without using air-conditioning in the summer. Stairs, central core straight to the roof helps to pick up light, optimal ventilation. Vertical and horizontal shading devices help shade the gaps and contours of the house. Plumbing, electrical wires are concealed inside a concrete wall. Warm-tone wooden furniture creates an accent for the space. The staircase area welcomes natural light for the entire interior space. Simple design bedroom, using only essential items. The working corner in the bedroom is filled with natural light, overlooking the green. Insulation walls seal the concrete frame, helping to minimize heat transfer. Photo source: Nguyen Quoc Dat Video: House 25m2- the opportunity to have a house for many people? Source: VTV24

In 2020, due to the influence of the Covid-19 translation, having plenty of time to rest at home, he discussed with his wife the idea of ​​building a dream house. Without any further hesitation, Mr. Tu sought to buy a land in the suburbs of Hanoi. On this land, the old owner left a perennial longan tree. The tree house is 22 square meters wide, 2.8 meters from the ground. Initially, he only intended to build a small house on a tree to be a play place for his children. In early December 2020, Mr. Tu officially started construction of the house. At that time, he asked some friends who are architects to design. However, at the end of the year, everyone was busy so he had to do the construction by himself and only asked them for advice. “First, I brainstormed and sketched the house on paper. I have been consulted by a few friends about the layout, construction plans, and additional bearing columns. Because I do not know the location of the distance between the branches, how do I work, fix it, “said the male host. Zing . According to Mr. Tu, the house is built mainly from pine and steel. Initially, he intended to hang the house on the tree. However, this idea is not feasible because the longan is located in the corner of the land, one side is adjacent to a neighbor’s house, the other side is next to the big road. In addition, the trunk is skewed so it cannot be deployed according to the plan above. After that, Mr. Tu built the steel column and welded the steel system above. In order to prevent the house from absorbing rainwater and preventing insects, he made 3 floors – the middle is steel, the top and bottom are wooden. In the roof, male homeowners use corrugated iron, foam, tarpaulin, palm leaves and cork trees for cladding. Regarding the auxiliary works, after calculating the usage, Mr. Tu designed the wooden bathtub. In particular, during the construction process, he did not cut any branches. The pictures inside the house are built on longan trees. “Many architects advised me to leave the tree trunk out into the hallway so as not to have to deal with the problem of rainwater entering the house. However, I still decided to put the trunk inside so that it truly means the tree house ”, he shared. To make this possible, Mr. Tu used a high-strength canvas wrapped from the roof to the tree trunk. Besides, he kept the space between the house and the tree trunk separated by young rubber and silicone glue. This helps to reduce the noise in the house when the tree is shaken by high winds or storms. When completed, the house has an area of ​​22 m2, 2.8 meters from the ground. Initially, Mr. Tu planned to spend about 100 million VND to build houses on trees. Due to a lot of repair work and disassembly, the house finishing costs are pushed up. However, he still feels very happy and satisfied with the results. “I have no intention of using this house for business. This will be the place for the whole family to have fun, enjoy the life and fresh air on the weekends ”.

Ford Ranger still has no rival in the Vietnamese auto market. Starting point, “Ranger” was just the name for a version on two iconic product lines of Ford, F-Series and Bronco. By the 1980s, the Ranger was no longer hiding the myths of the same company, but gradually shaped and known as an independent pickup product. In the following years, the Ranger became more and more popular and gradually asserted its position in the mid-size pickup segment with the ability to challenge all limits off-road. In particular, the Ranger Raptor version has set new standards and led strong products for the Ford family’s adventurous car owners. Similar to the unbeaten F-150 series, the “Built Ford Tough” foundation philosophy is the Ranger’s DNA. From the steel body design to the solid chassis system made of reinforced steel, to a variety of flexible tank options. It is the “bold American” features that make up the indomitable Ranger, possessing an impressive load of up to 1,425 kg and the ability to wade in depth championships up to 850 mm. Specifically, the Ranger’s tank can hold the equivalent of 300 million grains of sand or 2 cows without towing a trailer. . In case the driver needs more capacity to carry, the Ranger possesses a towing capacity of up to 3.5 tons, enough to pull at least 8 horses or 10 water motorcycles with powerful assistance from the electronic stability system and Ford trailer control. To be a reliable companion, the Ranger has undergone a series of complex testing programs to ensure the durability of the engine as well as the entire vehicle. From testing in extreme hot / cold environments to testing in thin air. Ranger is designed with outstanding durability to reduce risks and ensure comfortable journeys even after years of operation. In the Vietnamese market, Ford Ranger offers many different diesel engine and gearbox options. In which the most advanced version Wildtrak 4×4 is equipped with a twin-turbocharged engine producing 213 horsepower and 500 Nm of torque. Combined with an advanced 10-speed automatic transmission and deep water wading capabilities, the Ranger can take owners wherever they want. Ford Ranger Raptor: Setting new standards Developed for owners who love to conquer the terrain and love speed – Ford Ranger Raptor is a high-performance car (Ford Performance) with outstanding performance. Possessing a chassis system made of super-hard steel with improvements in design, the Ranger Raptor really goes beyond the mold of a pickup. Possessing a Bi-Turbo engine paired with a 10-speed automatic transmission that produces up to 213 hp and astonishing 500 Nm of torque – Ranger Raptor is designed to be able to operate on the roads the most dangerous. Ground clearance is also increased to 283 mm and the wading capacity is increased to 850 mm. Ranger Raptor is full of potentials that need to be discovered. From the 2.5-inch Fox Racing suspension, the advanced terrain control system with 6 modes, advanced gear shifters integrated on the steering wheel have all helped Raptor asserted the “king” position in the car segment. mid-size pick-up. Setting new standards, Ranger has maintained its leading position in the mid-size truck segment in many regional markets in 2020, including Vietnam with 65% market share. From the beginning of 2021, the Ranger recorded cumulative sales of 3,873 vehicles. In March alone, 2,171 Ranger cars were delivered to customers, accounting for 75% of the segment market share and leading the whole Vietnamese market in sales.

Throughout history, Ford Ranger has been constantly improved over the decades to become a famous pickup. Starting point, “Ranger” was just the name for a version on two iconic product lines of Ford, F-Series and Bronco. By the 1980s, the Ranger was no longer hiding the myths of the same company, but gradually shaped and known as an independent pickup product. Similar to the unbeaten F-150 series, the “Built Ford Tough” foundation philosophy is the Ranger’s DNA. From the steel body design to the solid chassis system made of reinforced steel, to a variety of flexible tank options. It is these “bold American” features that make up the indomitable Ranger, possessing an impressive load of up to 1,425kg and the ability to wade in depth championships up to 850mm. Ranger has maintained its leading position in the mid-size truck segment in many regional markets in 2020, including Vietnam with 65% market share. Specifically, the Ranger’s tank can hold the equivalent of 300 million grains of sand or 2 cows without towing a trailer (this is just an example, we advise owners not to follow suit). In the event that the driver needs more carrying capacity, the Ranger possesses a towing capacity of up to 3.5 tons, enough to pull at least 8 horses or 10 water motorcycles with great assistance from the Electronic Stability System. and Ford Trailers Control System. To be a reliable companion, the Ranger has undergone a series of complex testing programs to ensure the durability of the engine as well as the entire vehicle. From testing in extreme hot / cold environments to testing in thin air. From the beginning of 2021, the ‘Strong Ford’ Ranger recorded cumulative sales of 3,873 vehicles Ranger is designed with outstanding durability to reduce risks and ensure comfortable journeys even after years of operation. In the Vietnamese market, Ford Ranger offers many different diesel engine and gearbox options. In which the most advanced version Wildtrak 4×4 is equipped with a twin-turbocharged engine producing 213 horsepower and 500 Nm of torque. Combined with an advanced 10-speed automatic transmission and the ability to wade up to 800mm deep, the Ranger can take owners wherever they want. Ford Ranger Raptor Developed for owners who love to conquer the terrain and love speed – Ford Ranger Raptor is a high-performance car (Ford Performance) with outstanding performance. Possessing a chassis system made of super-hard steel with improvements in design, the Ranger Raptor really goes beyond the mold of a pickup. Ranger Raptor is full of potentials that need to be discovered Possessing a Bi-Turbo engine combined with a 10-speed automatic transmission that produces up to 213 horsepower and 500 Nm of torque – Ranger Raptor is designed to be able to operate on the most challenging roads . Ground clearance is also increased to 283mm and the ability to wade increased to 850mm. From the 2.5-inch Fox Racing suspension, the advanced Terrain Control system with 6 modes, the advanced shift paddles integrated on the steering wheel have all helped the Raptor asserted the “king” position in the car segment. mid-size pick-up.

Shen Zhengwen, the president of Fadio beauty, will visit the live broadcast room to plant Fadio stainless steel art kitchen cabinets around the world with star anchors Zhu Dan, Li Chen and Wang Mian[Bona].

Live time

20:00-23:00, April 25

Live top cargo

Fadio stainless steel art kitchen cabinet【Bona】

The house is not just a residence, but a life carrier with a unique soul and implicit standards.

Everyone has their own standards and aesthetics for their own homes, and niche and distinctive product designs can better demonstrate their attitude towards life.

Fadio uses 304 stainless steel to create the artist’s residence, differentiated materials, niche market, high-end positioning, avoiding the phenomenon of mass customization “jumping shirts” and redefining a new generation of trendy artists.

The Fadio stainless steel kitchen cabinet[Bona]which is logged into the live broadcast room of “Talk Show Home Party Night”, is a modern and simple style loved by many trendy patrons. It is a sought-after home item that combines design and practicality.

Fadio[Bona]is an environmentally friendly, zero-formaldehyde, antibacterial, hygienic, waterproof, moisture-proof, fire-resistant and durable stainless steel kitchen cabinet.

[Bona]The appearance design is very simple, it is a relatively common L-shaped layout, the door panel is titanium gray paint, using 220 ° high temperature car paint process, the surface is delicate and shiny, not easy to fade, scratch and abrasion resistance, easy to clean and beat It is still as long as new ten years later.

[Bona]It also comes standard with an integrated stainless steel countertop specially developed by Fadio. The countertop, sink, and front and rear water retaining strips are stamped and formed from a whole stainless steel plate at one time, with no gaps and very easy to clean. From the cabinet to the countertop to the door panel, cleaning time can be greatly reduced.

Fadio will launch a special discounted price in the live broadcast room of “Talk Show Home Party Night”.

Owners who watch the live broadcast from 20:00-23:00 on April 25 can receive coupons and lock in discounts directly. Show the coupons when ordering[Bona]at the Red Star Macalline brand store at Fadio, and you can get the “Talk Show Home” Preferential prices for the live broadcast of “Party Night”!

All Red Star Fadio stores can participate in this offer

248 live streaming malls nationwide

Fully help live broadcast customers

Pay attention to Fadio stainless steel art kitchen cabinets, and lock the “Talk Show Home Party Night” live broadcast room!

From 20:00-23:00 on April 25th, Fadio will be there for you!

Bar Stools Chair (Bar Stools Chair) has been widely used in the market, especially in bars, clubs … since the 90s of the last century with a characteristic design that is higher than the chairs. usually, common, normal. Currently, they are used in many different spaces, such as hotels, offices and in private houses, apartments … thanks to increasingly sophisticated and diverse designs. How to choose a bar chair? Currently, bar chairs are not only used for bars, discos but also in cafes, cafes, apartments, apartments, companies, businesses … Bar seating is around 60-80cm and the average base height commonly used is 75cm. For each purpose, bar chairs will be of different sizes and heights to suit different occupants and furniture: Bar seats at bars, cafes: The height of 75-80cm is ideal and often uses fixed leg models made from iron, steel, wood …
Bar stools at home: Having the same height as conventional bar products, it is possible to use the same type.
Making family kitchen island chairs: The kitchen island has a standard size of 80-110cm, so the models used will be 20 to 30cm lower in height to ensure balance and comfort in use.
Reception desk seats, consulting desk Usually depends on the front desk of the company, the shop to choose the right one.
Make-up chairs, spa, salon, beauty salon mostly low to facilitate styling and shaping (mainly ranging from 45 to 60cm). Beautiful bar chair samples are being sold in many furniture stores in Hanoi with different designs, materials and at different prices. To buy quality products at an affordable price, customers should look to reputable addresses with full warranty policies, full and clear customer support such as: VAVI Furniture Xuan Hoa, Hoa Phat … Beautiful bar chair samples in Hanoi Bar chair models are the most popular bar chair today and many people choose. Fixed leg bar chair provides safety and peace of mind for users thanks to 4 solid, stable legs. Some bar chairs are still fixed with rotating saddle, so it is also very convenient and flexible to use. The Tolix bar chair is a model that is used quite a lot, especially in outdoor spaces. The product has a simple yet modern and elegant design with many colors to choose from. The Tolix chair has a 4-legged design that is seamlessly cast from high-grade steel with anti-static paint so it has high durability, good resistance, so many bars, rooftop cafes and balconies choose. Bar chair is made from iron, steel, retaining the modern, natural beauty of metal. Due to being made of these materials, the product also brings the same advantages and feel as the above mentioned Tolix model. In terms of color, these bar chairs are mainly simple colors, without too many patterns and details. Bar chairs with legs are made of metal such as iron, steel, stainless steel … suitable for a lot of different spaces thanks to beautiful, sophisticated design with premium quality, durable as well as very easy to clean. The seat body combined with the steel legs, iron legs are also very diverse when made from many different materials such as wood, plastic, leather … Wooden bar chairs are popular not only in bars but also in cafes, milk tea … This type of chair not only brings a sense of certainty and safety, but also makes the space of the bar more elegant and luxurious. important and classical. Plastic bar chairs often use high-quality materials such as PVC, PP … with high durability, good elasticity as well as many colors for customers to choose from. In addition, these chair models are often lightweight so they are easy to move and arrange. In particular, the price of the plastic bar chair models is much cheaper than other bar chairs but still ensures the quality. The above article summarizes some beautiful modern bar chairs and is being selected by many people wishing to use it. You can consult and make the best choice with your needs and investment price.

Almost every piece of furniture is specifically designed for storage, but if you have a wire mesh it adds extra functionality to make it more usable. You can take advantage of vertical space around furniture such as the edge of drawers, cabinets … You can also use wire mesh to create a tidy and comprehensive storage area. Combine the strings so they are neat and organized The area behind desks, televisions, computers … often has a lot of wires and equipment and if not managed, properly arranged they will look messy, in this case, the wire mesh seems is an effective solution. Instead of ropes hanging and piled up, we can easily catch ropes to roll and straighten with wire mesh. Divide the space in the closet Inside the cabinet there is a large open or no compartment, to increase storage capacity we should use multi-purpose wire mesh. Any structure you want can be designed and assembled correctly, creating a neat, tidy space while still storing more furniture. Too convenient, right? Organize your wardrobe by item In a wardrobe there will be a lot of different things: clothes, bags, belts … and if not arranged in the right place will look very messy. So it is important to arrange the space for each item and the wire mesh will help you to solve that problem. Using wire mesh helps to distribute space by making dividers or hanging shelves. Adjust the gap in the wall to save money Wall-mounted applications typically require drilling or mounting of brackets. Instead of having to manage each mounting point, we should use wire mesh because it can be installed and adjusted to suit your wishes. Especially, it can be used in every room, every corner from the kitchen, the locker, to the working corner. Garden upright with wire mesh Vertical gardening is a space-saving idea to plant trees and create a unique atmosphere, and wire mesh is an important material to help you create that idea. Only need a single sheet of metal attached to the wall, each potted plant can be easily hung or fixed on the grid bar. At the same time, using the grid also helps you convert and arrange trees regularly and depending on your personal preferences./.

Steel wire conduit, also known as wire conduit, produced by Vietconduit has many types to suit the project’s objectives and use purposes set by customers. In the Vietnamese market, there have been many projects of installing and using steel pipes with VNC wires. Using VNC wire conduit helps protect the conductors from impact as well as brings high aesthetics to the project. Steel pipes for electrical wiring and Vietconduit accessories Fireproof and flexible installation Representative of Vietconduit said that the VNC wire pipe, made from carbon steel, is resistant to fire spread, high temperature resistance for many hours, does not generate toxic fumes when there is a fire in order to greatly limit the damage. people and property. In addition, the outside of the tube is covered with a polymer coating that prevents corrosion and rust, ensuring the steel pipe can be used with a durability of up to 50 years. Steel pipes are threaded VNC has a variety of sizes and models, customers can freely choose suitable steel pipes such as: EMT steel pipe, IMC steel pipe, RSC steel pipe … for installation place for buildings and buildings. Installing, using and maintaining the VNC conduit is quick and easy. Save cost and delivery time Vietconduit’s representative affirmed that using VNC wire-threaded steel pipes saves costs twice as much as imported goods while ensuring quality. The use of domestically produced steel wire pipes helps to shorten order and delivery time, to meet the construction schedule of the project. To meet the needs of super-fast delivery, Vietconduit also provides 48-hour delivery service for the surrounding areas of the city. Ho Chi Minh City like Binh Duong, Dong Nai, … Manufacturing and supplying all M&E systems for electromechanical materials Vietconduit is one of the pioneering companies in Vietnam to invest in building a factory to manufacture and supply steel wire pipes and accessories in full package according to international standards UL (USA) – BS (UK) – JIS ( Japanese). Before 2010, most of steel pipe products with wire conduction were imported from abroad, so the price was high. In order to meet the growing needs and use of steel pipes, Vietconduit always learns the process of producing electromechanical materials from many developed countries in the world, especially the steel pipe production line. wire, then applied and put into operation at the factory. Vietconduit provides a full package of M&E electrical equipment and equipment for the project from steel pipes to steel pipes to accessories attached to steel pipes, pipe suspensions … VNC wire pipes are of quality, durability, and cost. reasonable and thoughtful warranty policy, is the first choice of electromechanical engineers in Vietnam. Buy all products at the same manufacturer, helping to ensure consistency and stable quality according to international standards, on schedule. Quality affirmation through each project Over the years, the electromechanical materials provided by Vietconduit have been trusted and used in many key projects. Vietconduit asserted its position through works such as: Tan Son Nhat International Airport, Buon Me Thuot Airport, Phu Quoc Airport, Bitexco Building, Times Square Building, Cargill Factory, Far Eastern Textile Factory Polytex (Binh Duong), Lock & Lock factory (Ba Ria-Vung Tau), Millennium Furniture factory (Quang Ngai) … also become partners of electromechanical contractors in Vietnam as well as foreign partners. such as: Coteccons, Unicons, Yurtec, Shinryo, Kinden, Jesco Hoa Binh … Steel pipes for electrical wires and accessories VNC are installed and used at Bitexco Building Vietnam Electric Wire Pipe Joint Stock Company (Vietconduit VNC) Address: No. 5, Street 8, KDC Cityland, Ward 5, Go Vap District, Ho Chi Minh City. Website: https://vietconduit.com Phone: (028) 2224 3339 Mobile: 0937 867 126 – 0915 574 448 Email: kinhdoanh@ongthepluondaydien.com

Internet photo

Losing money for many years

Vietnam Industrial Construction Joint Stock Corporation (Vinaincon, VVN code – UPCoM transaction) was established in 1998, with charter capital of 550 billion VND, and 82.75% of state capital represented by the Ministry of Industry and Trade. The company specializes in construction and installation, basic construction.

The audited financial statements of the parent company 2020 have just been announced by VVN, showing that the total assets of the company is 987 billion VND. Revenue from goods sold and service provision in 2020 will reach 313 billion VND but COGS is 314 billion VND, so gross profit is negative 724 million VND.

Revenue from financial activities is 48.4 billion VND. The cost of business management is 30 billion. Net profit reached 9.3 billion. Thereby, after-tax profit reached 13.2 billion.

According to the note, the revenue from financial activities mainly comes from deposit interest, interest of 18.4 billion dong, and dividend of 29.9 billion dong.

It is known that VVN invests in many subsidiaries and associates. These companies are mostly profitable, the highest profit is from Thu Duc Centrifugal Concrete JSC (13 billion VND) and An Giang Centrifugal Joint Stock Company (6.1 billion VND).

Up to this point, VVN has not yet released its 2020 consolidated financial statements. In early April 2021, VVN also submitted a request to extend the time to hold the 2021 Annual General Meeting of Shareholders for the reason that results were summarized. The Corporation’s production and business have not been completed yet because the work-in-progress valuation and debt comparison with the investors are difficult and prolonged.

According to the annual report of 2019, although the total revenue and other income in 2019 increased by 126.7% compared to 2018, reaching more than 4,443 billion VND, but the cost of goods sold was high. In addition, the investment from Quang Son Cement Company Limited lost a loss (minus 126 billion VND), making the company’s profit in 2018 and 2019 all negative numbers.

In 2020, the company has a decision to dismiss Mr. Hoang Chi Cuong – General Director, instead appointing Mr. Do Chi Nguyen.

Please clarify the role of Vinaincon

From April 12, Hanoi City People’s Court brought to trial with 19 defendants who are leaders of Vietnam Steel Corporation – VNS, Thai Nguyen Iron and Steel Joint Stock Company – TISCO on wrongdoing in this project with behavior like Adjusting the investment structure, signing the contract appendix, separating part c from the EPC contract, signing subcontracting contract with Vinaincon according to unit price, leading to breaking the EPC contract principles …

Vinaincon is a subcontractor involved in Thai Nguyen Iron and Steel Phase 2 project. In 2009, the EPC contract between Thai Nguyen Iron and Steel Joint Stock Company – TISCO and Chinese contractor MCC had problems due to consecutive MCC. contract breaking.

On April 29, 2009, Vinaincon sent a document to the Ministry of Industry and Trade, Vietnam Steel Corporation – VNS (granting investment decision) and TISCO to register as a subcontractor.

On May 14, 2009, on the basis of the request of Vinaincon, the Ministry of Industry and Trade sent a document 4320 to VNS, TISCO with the content that the Ministry of Industry and Trade commented, “Vinaincon is a capable and experienced unit in the field. construction and installation of industrial construction works. Request VNS, TISCO to consider and approve Vinaincon to be the subcontractor to perform Part C ”.

On June 26, 2009, Mr. Mai Van Tinh – former Chairman of the Board of Directors of VNS signed a written agreement to allow Vinaincon to be a subcontractor. After that, TISCO, Vinaincon and MCC signed the contract.

However, in 2010, Vinaincon returned his job to TISCO due to insufficient capacity. TISCO had to subcontract with 13 other companies, but the project was still incomplete, capitalized and caused a loss of more than VND 830 billion to the state.

Some defendants admitted that they accepted Vinaincon because of the above document from the Ministry of Industry and Trade.

Defending defendant Tran Trong Mung (former General Director of TISCO), lawyer Truong Anh Tu said that in the conclusion of the project, the Government Inspector has determined that the Ministry of Industry and Trade has introduced and proposed VNS, TISCO to accept It is not the right authority for Vinaincon to be a subcontractor.

Lawyer Nguyen Thi Minh Yen, defending defendant Dong Quang Duong (former deputy director of TISCO), stated that: TISCO’s approval of Vinainco as a subcontractor for MCC must first mention the responsibility of the Ministry of Industry and Trade in the issue of introducing Vinainco and confirming Vinainco’s capacity to lead to a tripartite contract between TISCO – MCC and Vinaincon. Next, the fact that Vinainco voluntarily stopped implementing part c was due to the subjectivity of Vinaincon.

Therefore, the lawyer proposed to return the file to investigate and review the responsibility of the Ministry of Industry and Trade; Collect documents and evidence of Vinaincon’s performance of the contract, clarify how Vinaincon appoints 13 subcontractors? …

Steel prices today April 15, many brands suddenly increased their selling prices.

Steel prices in the North

Today April 15, with Hoa Phat steel brand, the price for CB240 steel coil is at 15,890 VND / kg. D10 CB300 steel is currently priced at 16,080 VND / kg.

Vietnam Italy steel brand name today has not changed, CB240 coil is currently priced at 16,040 VND / kg, while D10 CB300 steel increased 300 VND from 15,690 VND / kg (price April 13) to 15,990 VND. / kg.

With Viet Duc Steel (Viet Duc Steel Joint Stock Company) the current price of 2 products is 16,140 VND / kg (with rolled steel CB240) and 16,020 VND / kg (D10 CB300 steel). From March 13 to the present, the company’s steel price has increased by more than 1,000 dong, the highest price in a month.

Kyoei steel factory price remains stable for the 5th consecutive day, with CB240 coil currently priced at VND 15,690 / kg and rebar D10 CB300 currently at VND 15,790 / kg.

Thai Nguyen Steel Company in the evening of April 14 suddenly adjusted to increase prices, currently with 2 CB240 steel coil products, the price is 16,800 VND / kg; also with D10 CB300 steel at the price of 16,240 VND / kg (both products increased by 300 VND).

US steel shows price stability for 12 consecutive days. Currently, the price of rolled steel CB240 is 15,340 VND / kg, while rebar D10 CB300 is at 15,410 VND / kg.

Thus, today, the price of rolled steel CB240 ranges from 15,340 VND / kg to 16,800 VND / kg; while rebar D10 CB300 steel costs from 15,410 VND / kg to 16,240 VND / kg.

Steel prices in the Central region

Hoa Phat Construction Steel has updated its new selling price, slightly decreasing 2 of its steel products. Specifically, the line CB240 steel coil is priced at 15,790 VND / kg; with D10 CB300 steel is currently priced at 15,840 VND / kg.

Viet Duc Steel Joint Stock Company today continues to stabilize prices for the 5th consecutive day (from April 10 to April 15), currently 2 products of CB240 steel and D10 CB300 steel are priced at VND 15,740 / kg.

Pomina Steel, after a strong price increase, continues to stabilize for many consecutive days, unexpectedly increases the price, currently with rolled steel products CB240 is priced at 16,500 VND / kg (an increase of 410 VND); with D10 CB300 steel at 16,600 dong / kg (up 360 dong).

Thus, the price of steel in the Central region with the price of rolled steel CB240 is fluctuating at VND 15,740 / kg to VND 16,500 / kg; with rebar D10 CB300 steel is maintaining the price from 15,740 VND / kg to 16,600 VND / kg.

Steel prices in the South

With the Hoa Phat brand, in the Southern market, the price of its products continues to be adjusted. With rolled steel CB240 is priced at 15,790 VND / kg; and rebar D10 CB300 rebar is at 15,840 VND / kg.

The Pomina brand has a price increase adjustment. With rolled steel CB240 and D10 CB300 steel, the prices are 16,390 VND / kg and 16,500 VND / kg, respectively.

Southern steel brand increased selling price, exceeding 16,000 VND / kg. With rolled steel products CB240 has a price of 16,190 VND / kg; while with rebar D10 CB300 steel is 16,090 VND / kg.

Tung Ho steel factory has also raised selling prices. With rolled steel CB240 is at 16,190 VND / kg, while rebar D10 CB300 price is 15,940 VND / kg.

It can be seen that, in the Southern market today, apart from the steel giant Hoa Phat adjusting and lowering the price, other brands are raising the price of their steel products.

On the Shanghai Exchange

Steel price today delivered in October 2021 on the Shanghai Exchange increased by 6 yuan to 5,137 yuan / ton at the time of the survey at 9:45 (Vietnam time).

On Tuesday (April 14), iron ore futures prices in China rose for the third consecutive session, closing at the highest level on record in the past five weeks, Reuters reported.

Hanoi Iron and Steel Joint Stock Company was established in 2013, the main production and business activities are the wholesale of scrap, metals, and non-metals.

Specifically, the enterprise specializes in importing all kinds of scrap iron and steel from businesses and industrial parks and then distributes it directly to iron and steel producers nationwide. Current charter capital is 50 billion VND.

In terms of shareholder structure, as of January 31, 2021, HSV has 109 shareholders, all of them are individual shareholders in the country. The only major shareholder is Mr. Nguyen Van Quan, Member of the Board of Directors cum General Director, holding 13% of the company’s capital.

Notably, Mr. Nguyen Mau Hoang, Chairman of the Board of Directors of HSV is currently the Head of Corporate Finance Advisory Department at Phu Hung Securities JSC. Before that, Mr. Hoang worked at many other financial institutions and securities companies.

Regarding business results in 2020, HSV recorded 322 billion VND in net revenue, an increase of 30.61% compared to 2019; profit after tax 2.5 billion, down 20.64%. Total asset value by the end of 2020 reaches 77 billion VND, up 9.18%. The enterprise currently has a short-term financial debt of 23 billion dong.

Regarding the business plan in 2021, the enterprise is expected to reach 330 billion VND of net revenue and profit after tax of 3.5 billion VND, increase 2.48% and 40.51% respectively compared to the implementation in 2020. Year In 2022, the enterprise sets a target of 350 billion VND of net revenue and 4.8 billion VND of profit after tax.

(Source: koreaittimes)

POSCO, the world’s fifth-largest steel producer by production, said on April 14 that it would build a factory in Korea to extract lithium hydroxide, a key ingredient in electric vehicle battery (EV).

POSCO’s announcement said last week that the Board of Directors approved a plan to complete a factory in the industrial city of Gwangyang in southern Korea by 2023.

The plant, which will start construction in the first half of this year, is expected to have an annual production capacity of 43,000 tons of lithium hydroxide, enough to produce about 1 million electric vehicle batteries.

POSCO said they plan to import spodumene for the extract lithium hydroxide at the factory above from Australia.

In addition, POSCO plans to start building another plant near the Salar del Hombre Muerto salt lake in northern Argentina in the coming months. The plant is expected to have an annual capacity of 25,000 tons of lithium.

POSCO purchased lithium mining rights in Argentina from Australian mining company Galaxy Resources for $ 280 million in 2018. Currently, the steel producer has the mining rights for 22,800 hectares of the area.

According to POSCO, the site is confirmed to have lithium reserves of 13.5 million tons, enough to produce batteries for about 370 million electric cars.

The South Korean giant steel giant has stepped up its activities in the electric vehicle segment in recent years as part of its business diversification strategy.

In February 2021, POSCO Chemical, a subsidiary of POSCO, announced plans to invest 275.8 billion won ($ 248 million) to expand the production capacity of cathode, a key component for batteries. EV for a factory in Gwangyang.

In addition, POSCO Chemical also plans to set up factories in China and Europe to promptly supply cathode to EV battery manufacturers.

The EV battery market is on a strong momentum as automakers around the world are racing to convert to electric and eco-friendly vehicles.

This wave comes in the midst of tightening regulations on greenhouse gas emissions by governments – which scientists say is the cause of global warming.

Earth has been 4 billion years old since its birth in the universe. In the long history of the Earth, the stars, planets, satellites, asteroids in the universe along with the Earth have all had a fixed or uncertain mode of action. The formation of the Solar System, the Moon, asteroids crashing into the Earth, comets … prove that claim.

As the development of human civilization took shape on Earth, we began to explore the mysteries of the universe and our own planet.

Humans have discovered countless impact craters on Earth formed by the “falling stars” that once crashed into the Earth. These “falling stars” are then referred to as “meteorites / asteroids”, and the traces they leave on Earth are known as “meteorite craters” or impact craters.

It can be said that the crater is a symbol and evidence of the intersection of cosmic objects and the Earth. Not only that, some scientists who support the “exogenous” theory even believe that the water and energy necessary for life on Earth today are due to the impact of meteorites and comets.

Although this is not supported by strong evidence, the craters are still very valuable to scientists studying celestial celestial bodies. It is of great significance for the study of the formation and evolution of the Earth, the change in climate, the environment and animals in ancient times, the role of biological processes and mineralization.

Today, many meteorite holes have been discovered, through studying them, people have discovered many unknown secrets from ancient times as well as unique minerals created when Huge asteroid collided with the Earth.

THE LARGEST THIEN THIEN THE PLANET

According to the report of the Earth Impact Database released in 2016, worldwide there are about 190 impact craters detected so far. And the planet’s largest, oldest and most severely eroded asteroid crater is Vredefort Crater in South Africa.

The Vredefort asteroid crater is a crater that has existed on Earth for 2 billion years – it is the result of a meteor’s shock impact with the Earth at speeds right between 40,000 and 250,000 km / h. The diameter of the Vredefort Crater exceeds 300 km, making it the largest and oldest meteorite crater in the world (second after the Yarrabubba crater in Australia (2,229 billion years old), NASA updates for 2020.

The Vredefort meteorite hole in South Africa.

This huge meteorite hole is located in the Free State province, South Africa. Because the crater is so large, local people do not realize it is the “legacy” from the “meeting” of the Earth and meteorites. However, its enormous size has attracted scientists and geologists from all over the world.

In 2005, the United Nations decided to include the Vredefort impact pit on the list of World Heritage Sites in need of protection.

LOOK AT THE PAST – FORWARD TO THE FUTURE

Talking about the crater / meteorite hole, many people do not know the Chicxulub (Yucatán peninsula in Mexico), 150 km in diameter, occurred about 65 million years ago.

Many scientists believe that perhaps the extinction of a generation of dinosaurs on Earth at that time was related to the climate change due to the impact of this meteorite.

Likewise, as the world’s largest crater, the formation of the Vredefort Crater should have had a serious impact on Earth’s climate and biological evolution. We just haven’t figured out exactly what it has affected and how it affects it.

Before that, the United Nations formed a scientific research group, based in South Africa, and conducted scientific research in the Vredefort crater for seven years. In the end it was asserted that the meteorite’s destructive power plunged into Vredefort enough to change the climate and the structure of the African plate. Scientists are continuing to study the long-term effects from Vredefort’s earlier.

What is different from Vredefort’s other meteorite craters in the world is that it has grown from what should have been abandoned into a city complete with hundreds of thousands of inhabitants, and generations of people have been in This huge crater is like a peaceful paradise.

Scientists said, meteorites that plunged into the Earth may leave large “scars” for Earth on the bottom of the deep sea. Because the asteroid craters we’ve found so far are all above ground.

Due to the very large and deep seabed area, scientists currently do not have enough technology to conduct detailed investigations. Therefore, the impact crater on the sea floor remains an unsolved mystery in the scientific world. If you want to research, you must go through a long process of discovery by scientists, and this will also be the direction that scientists need to strive for in the future.

Articles using source: QualityandCertification, Yqqlm

Since the company’s energy management system (Energy Management) came into operation in 2014, information on equipment operation and energy consumption has been reviewed and evaluated comprehensively. In fact, the plant’s lines are invested in many stages, asynchronous, so it is necessary to research to have appropriate solutions, especially related to synchronous lines and energy consumption, positive pressure. to use new techniques and technologies to use energy economically and effectively, improve the life of equipment and reduce costs.

In addition to internal issues such as promulgating regulations and instructions related to operating and using equipment to save energy, raising the user’s awareness into a cultural feature, the Company has implementing many renovation projects. Typically the major improvements are as follows:

Water supply system improvementPreviously, using only one upstream station and mixing pumps with different characteristics, causing energy loss, often having problems in the pump system and not meeting production needs well.

The renovation project is divided into 2 independent stations and connected in series: the upstream station reduces the pressure and increases the flow to supply part of the transmission line and the booster pump station is used for the required equipment. higher pressure. Each of these pumping stations includes a number of pumps with the same output and ensures the characteristics of parallel-connected pumps are equivalent and each station has 01 inverter pump as the main driver to automatically control the remaining pumps according to the applied pressure.

Always maintain the desired pressure in each area and optimize power consumption when demand changes to reduce power consumption in this area. The equipment’s age has also been markedly improved.

Install the inverter that controls the fan motor speed: To replace the flue air pressure control system with the previous inlet throttle.

When the power consumption is in proportion to the rate of 3 with the change of speed: N1 / N2 = (n1 / n2) 3 should show that in addition to the ability to respond to the fast system, the power consumption is very saving. After replacement, it was verified that power consumption decreased by more than 20% compared to before.

Replaced Russian 20/8 Piston Air Compressor: By Ingersoll-Rand R160 inverter controlled air compressor from USA to help adjust pressure as desired and save energy consumption.

Installation of low voltage compensation system: In addition to 6KV compensation, automatic compensation cabinets are installed for low voltage distribution stations; directly install compensation cabinets for AC motors> 22 KW, right near where the engine works; help to improve quality Electrical Power for the gear and reduce losses, reduce current through the switch for direct compensation motors.

Install the LEDs: For use areas with different requirements 150 lux, 200 lux, 300 lux, 500 lux, and have separate switches that are clearly communicated and specifically assigned.

Replace the oven ceiling with new materials: Previously made of heat-resistant concrete, there was a large heat loss with the temperature measured above 100 degrees C, the Company replaced with a new material with ceramic fiber, the temperature dropped to around 70 degrees Celsius and ensured ensure better life during work

Installation of aeration systems for filter towers: Helps to dispel the debris that clumps up that previous backwash is ineffective. Helping the filter towers always in effective working conditions, reducing pump power consumption due to reduced filter pressure and increasing the time to change filter material after 3 years instead of yearly as before, reducing production costs.

Renovation of replacement materials for cooling towers: The previous material is PVC with a short working time that must be replaced every 3 years and has a lot of dirt, reducing the heat exchange process is replaced by a Composite material (FRP) with better heat resistance. , no fouling and Splash Bar design to create turbulent and splashing flow for better exchange and cooling (the previous temperature through the Tower only decreased from 5-7 degrees, raised to 10-12 degrees C), reduce the power consumption for the cooling fan and the service life of the material is more than 10 years.

With a series of technical solutions above, energy audit results in 2018 show that energy management activities in Vietnam – Singapore Steel have achieved quite good indicators, power consumption and FO oil have both decreased. Specifically for electricity, from 2015 to 2020, auxiliary power will decrease from 21.70 Kwh / ton to 20.48 Kwh / ton of product; Electricity for production decreased from 97.97 KWh / ton product to below 86.79 KWh / ton of product. FO oil for billet baking in 2015 to 2020 will decrease from 32.50 liters / ton of products to 31.29 liters / ton of product.

Sharing experiences in energy saving activities at the Conference of the Ministry of Industry and Trade

Energy management activities, research and application of science, technology and new technology in the production process help reduce consumption and optimize expenditure. From there, it will contribute to improving productivity, product quality, reducing costs and increasing product competitiveness in the market.

Moreover, this also shows the sense of responsibility, increases creativity and professionalism in the work of the technical team of the Company. Using energy economically and efficiently is a very unique culture of NatSteelVina and this activity has been shared at a number of specialized conferences of the Ministry of Industry and Trade.

The company will continue to uphold its existing results and traditions to grow and prosper.

Ministry of Industry and Trade is responsible?

In court, the defendants have the right to argue before the prosecution’s allegations that they are responsible for the VND 830 billion loss case at the Thai Nguyen Iron and Steel Phase 2 Production Expansion Project (TISCO).

Defendant Tran Trong Mung, former General Director of TISCO, was the first to have the right to argue, but asked lawyer Dinh Anh Tuan to defend himself. Previously, defendant Mung was offered a penalty of 10-11 years in prison by the Procuracy because he was accused of having the main responsibility in the case when he did not terminate his contract with China Metallurgical Science, Technology and Trade Group (MCC) even though this business has violated.

Project of production expansion phase 2 of Thai Nguyen Iron and Steel Company stopped construction for many years. Photo: GENERAL WRITE

The proceeding agency said that the defendant should Mung must terminate the contract with MCC, withdraw the advance; report to the authorized person to cancel the bid or to re-bid. However, he directed to negotiate at the request of MCC; sign a written request for price increase of part C (construction and installation) in the EPC contract of the project.

The Procuracy also accused Mung of introducing and accepting the Vietnam Industrial Construction Corporation (VINAINCON) as a subcontractor. Since then, VINAINCON is not qualified, so in 2011, construction has stopped, making the project unfinished so far.

Defending defendant Tran Trong Mung, lawyer Dinh Anh Tuan said that it is necessary to consider the responsibility of the Ministry of Industry and Trade when introducing VINAINCON to the defendants in the case so that they can choose to be subcontractors.

According to lawyer Dinh Anh Tuan, the main responsibility in introducing VINAINCON must belong to the Ministry of Industry and Trade; TISCO and Vietnam Steel Corporation – VNS are only liable for joint responsibility.

Lawyer Dinh Anh Tuan also said that his client only has a part of responsibility in introducing VINAINCON as a subcontractor, so he asked the court to transfer the crime from “Violation of regulations on the management and use of property. water causes loss and waste “to” Lack of responsibility, causing serious consequences “.

Regarding the alleged loss of VND 830 billion, VINAINCON was approved as a subcontractor, the defendants are former leaders at TISCO and VNS declared, they accepted because there was a document signed by the Ministry of Industry and Trade signed by a Deputy Minister. In the document, the Ministry of Industry and Trade said that VINAINCON is an enterprise of the Ministry with good capacity.

“Choose VINAINCON because according to experience”

Before that, in the questioning section, judge Truong Viet Toan asked VINAINCON’s representative, Mr. Hoang Chi Cuong (at the time of project implementation, VINAINCON’s General Director) to clarify the capacity of this business when being introduced to a subcontractor in the EPC contract.

Judge Truong Viet Toan asked Mr. Hoang Chi Cuong to confirm that at the time the bid received the requested documents from MCC and TISCO?

Mr. Hoang Chi Cuong affirmed that he has not received any documents yet.

Seeing “unreasonable”, because there is no request dossier in the bid, but VINAINCON is a subcontractor, judge Truong Viet Toan asked: “Without the request, on what basis for VINAINCON to respond. Asked to bid? ”

Mr. Hoang Chi Cuong said that this is just the selection of subcontractors of MCC, this is not the bidding document!

2 representatives of VINAINCON presented in court. Photo: DO TRUNG

Explaining to the representative of VINAINCON, judge Truong Viet Toan said that the selection of a contractor is also a form of bidding in the Bidding Law, in which the Bidding Law governs; the only difference is that public bidding or appointment of contractor, appointment of contractor is also a form of bidding.

“In the EPC contract, the general contractor MCC has the right to select the contractor according to the method of bidding or contractor appointment. Also in the same contract, the provisions of the contractor’s responsibility depend on the MCC; MCC selects subcontractors on the basis of bidding or contractor appointment. Bidding or appointment of contractors is ultimately regulated in the Bidding Law. Bid preparation will include requirements documents, in which the project owner will require to do what works, how economic and technical efficiency, progress on time, construction design, evaluation of works. What is the project’s environmental impact? Perhaps you do not understand what the required documents are, “said judge Truong Viet Toan.

According to Judge Truong Viet Toan, the selection of contractors, appointment contractors or tenders are all governed by the Bidding Law; In the initial steps, there are bids, in the bidding documents there are requirements.

“I asked to see how the pressure is. Because all the defendants at TISCO declared the selection of VINAINCON, this is an incompetent and inexperienced unit. And based on that dossier of request, how VINAINCON responded according to the required dossier, to see if it is true or not, ”said judge Truong Viet Toan.

Meanwhile, Mr. Hoang Chi Cuong continues to affirm that his business is a subcontractor and has never received the required documents from TISCO and MCC.

Judge Truong Viet Toan continued to prosecute: “So on what basis to sign a three-party contract?”

“Signing a 3-party contract on the basis of the capacity and experience of VINAINCON for the previous works done”, said representative of VINAINCON.

Judge Truong Viet Toan interrupted: “But, in reality, there are things that cannot be empiricist. How do you see the specific capabilities of VINAINCON in this project? “

Please be presented more, Mr. Hoang Chi Cuong said that VINAINCON has done many great projects since the 1960s, such as Apatite Lao Cai, participated in the construction of Thai Nguyen Iron and Steel Area from the beginning, Supe Lam Thao, steel, hydropower …

“Those are achievements, this is not a meeting to raise achievements and reward for emulation”, judge Truong Viet Toan asked Mr. Cuong to focus on the question …

After 3 days of questioning, on April 14, the representative of VKSND Hanoi announced the impeachment of 19 defendants related to wrongdoing at the second phase of production expansion project of Thai Nguyen Iron and Steel Company (TISCO).

Break contract rules

Accordingly, the VKSND proposed the Panel to sanction the defendant Tran Trong Mung, former General Director of TISCO, from 10-11 years in prison; Mai Van Tinh, former Chairman of the Board of Vietnam Steel Corporation (VNS), from 6-7 years in prison; Tran Van Kham, former Chairman of the Board of Directors, General Director of TISCO from 9-10 years in prison; Dau Van Hung, former General Director of VNS from 3-4 years in prison and 11 other defendants were recommended from 2-7 years in prison with the same crime “Violation of regulations on management and use of state property causes losses. , waste”. In addition, 4 other defendants were recommended 1-3 years in prison for the same crime of “Lack of responsibility, causing serious consequences”.

Defendant Mai Van Tinh at the trial

According to VKSND, TISCO is the investor of the second-phase production expansion project of TISCO. The VNS Board of Directors is the level of investment decision, with the function of directing project implementation. The winning bidder is China Metallurgical Science, Technology and Trade Corporation (MCC).

During the implementation of EPC Contract No. 01, more than 11 months from the effective date of the contract, MCC has not selected and signed the contract with the subcontractor; the detailed design of the items has not been completed, the machinery and equipment are not ordered to manufacture, the contract items have not been executed, but all people have been sent home; repeatedly proposed to extend the contract performance period; Unwarranted contract price increases …

With the assigned functions, duties and powers, defendant Mung is the General Director of TISCO and defendant Tinh, the Chairman of the Board of Directors of VNS, did not consider, direct the suspension, termination of the contract, withdrawal of advance payment, and use the contract penalty clause, report to the competent person for consideration to cancel the bid and re-organize the bidding according to regulations. On the contrary, the defendants directed the violations of the investment laws and the EPC Contract No. 01 to continue the contract performance, together with their subordinates in directing relevant individuals to the organization making adjustment of cost estimate part C. Along with that, participating in subcontracting to perform Part C of EPC Contract No. 01 in the form of unit price contract, TISCO directly takes over, takes over and makes payment. for the subcontractor to implement Part C, bear all risks, break the principle of implementing the contract in the form of a package, creating conditions for MCC to have a reason to deny the responsibility of implementing EPC Contract No. 01.

Competent contractor approval

In addition, the defendants also agreed that the Vietnam Industrial Construction Corporation (VINAINCON) was not qualified as a subcontractor to implement Part C of the EPC Contract No. 01, resulting in the project being delayed. raising interest rates, increasing investment costs, causing a particularly serious loss of state assets of more than VND 830 billion. The defendant’s behavior also adversely affects the interests of workers, indirectly adversely affects the economic development process and is currently a burden on the economy, affecting social security.

In this case, defendant Mung has the main role, is the person who directs and organizes the implementation of the offense. Specifically, when MCC breached the contract, the defendant directed to negotiate with MCC to separate Part C from EPC Contract No. 01, TISCO organized the implementation and took the risk; sign documents to report VNS and the Ministry of Industry and Trade request to report to the Government for approval of price adjustment for part C of the contract; Introduce and approve VINAINCON is not qualified as a subcontractor to perform Part C according to unit price …

Defendant Tinh is a co-offender of active crime. When TISCO reported the breach of the contract by TISCO, the defendant directed to negotiate with MCC to resolve the arising of EPC Contract No. 01; directly sign documents to request the Ministry of Industry and Trade to report to the Government for cost adjustment part C of EPC Contract No. 01; signed a document requesting the Government to agree on the policy of approving that VINAINCON is not qualified as a subcontractor to perform Part C; sign the written approval and assign the capital representative of VNS at TISCO to approve the adjustment of the total project investment structure, including the provision for part C of EPC Contract No. 01 increased by 15.57 million USD has no legal basis, is not in accordance with the provisions of EPC Contract No. 01.