Kage Bushin Unlike Bunshin no Jutsu (Clone Technique), Kage Bunshin no Jutsu (Shadow Clone Technique) has a completely different level. With this jutsu, the user creates one or more clones of himself. Although many, the biggest difference here is that the clone image can completely affect other objects, just like a real living organism. When cast, each clone will share an equal amount of chakra, so it can completely bypass the Byakugan (White Eye). Each clone is linked together by very small chakra fibers and their endurance depends on the user. Another good thing is that the clones are almost closely linked to the main body, so the being can use this ability to observe the battlefield situation for themselves, or increase the learning rate many times faster than the main body. with normal. However, the drawback of this jutsu is that it consumes a lot of chakra, so only those with a large amount of chakra and good chakra tuning can master this jutsu. The higher version of the Kage Bushin is the Taju Kage Bunshin (Multiple Shadow Clone), which creates an unlimited number of clones, depending on the amount of chakra spent by the caster. For those possessing Tailed Beast chakra like Naruto, they can create hundreds of different versions at once. However, when cast, each clone will be divided with an equal amount of chakra. So, with too large a number, it will greatly affect the user, so this move is listed as a forbidden technique. Basically, this move was originally a product of Tobirama, but he himself was unable to use its full potential. Although it is easier to learn than most other forbidden techniques, how to use it is almost impossible. Hiraishin Hiraishin (Flying Lightning Divine Art) is one of Tobirama’s creations, and is also the form of jutsu he uses the most. To perform this jutsu, the caster marks a special mark, also known as the ‘sequence’, on a predetermined destination with just a light touch, be it a tree, stone, wall, or body. creatures and even weapons like shuriken, kunai. Unlike normal marks, this will last forever and therefore, the marked enemy will forever become the “destination” of the user. Once marked, they can freely enter the dimensional gap that teleports them to the pre-marked location. This teleportation speed is so fast that the user can surpass even the Raikage’s speed, regardless of whether or not they augment themselves with Lightning Armor. Thanks to Hiraishin, Namikaze Minato was nicknamed the “Golden Flash of Konoha” long before he became a Hokage. Minato primarily applies jutsu to his custom kunai before battle so that when the battle begins, he will launch them across the battlefield, giving the opportunity to teleport to any place at any time. With extremely fast reflexes, Minato can easily slip into enemy lines to destroy each target, then teleport to another location to continue attacking. As a result, it was almost impossible for the enemy to react in time and Minato could sweep an entire squadron in an instant. With this tactic, Minato helped Konoha to win over the Ikon army in the 3rd Shinobi World War even though they were initially outnumbered. Hiraishin can affect anything that has contact with the user (such as touching) or even their chakra. Using this principle, Minato blended his brother’s Nine-Tails of Yin chakra with his son’s Nine-Tails Yang chakra, in order to be able to teleport the Alliance of Shinobi. Tobirama and Minato are the only two shinobi able to perform this technique on their own in history. As for Genma, Raidou, and Iwashi, they have to work together. However, the weakness of this technique is that when teleporting, the amount of chakra required to cast will have to be equal to the number and size of the target. Therefore, when teleporting a giant like the Nine-Tails Kurama out of Konoha, Minato was almost exhausted from running out of chakra. From Hiraishin, Tobirama developed other techniques based on this jutsu, such as Hiraishingiri (Flying Thunder God Slash) and Hiraishin Goshun Mawashi no Jutsu (Fluid Return). With his powerful swordsmanship with superhuman teleportation speed, Hiraishingiri fatally wound Uchiha Izuna – Uchiha Madara’s younger brother. Meanwhile, Hiraishin Goshun Mawashi allowed Tobirama to swap positions at any time with another user of the Flying Thunder God Technique he marked.

Technicians of the Center for Radiation Technology and Biotechnology (Nuclear Research Institute, based in Da Lat city, Lam Dong) next to a radioactive projector that causes mutations in plants. The Center for Radiation Technology and Biotechnology (Nuclear Research Institute) is a unit that regularly applies radiation techniques to select and create mutant varieties on plants. Especially in the past time, the orchid and bonsai market has been extremely active, many customers have come to the center to irradiate to mutate their plants. The irradiation process is quite quick, with the new technology Gama Cobalt irradiator, this process only takes about 1-2 minutes and is completely automatic. Immediately after, orchid seeds will be taken to the separation room to be cultured in nutrient solution for a certain time. After that, these plants were further isolated many times to select mutant morphologies different from the parent plant. Master Le Xuan Cuong, irradiation technician (Center for Radiation Technology and Biotechnology), said that the number of doses will vary depending on the sample provided by the customer such as tissue samples, branches, seedlings… “After irradiation, it will produce random mutations, beneficial or harmful, regardless of their will” – Master Cuong said. Currently, the Center’s Culture Room is storing many pseudo-crane orchid seedlings that have mutated on the stem and on the leaves. Specifically, the color of leaves and stems have turned white or purple. These are mutant forms that can be seen immediately, for flower color, you have to wait for the plant to grow and flower as usual. According to Mr. Le Van Thuc, Deputy Director of the Center for Radiation Technology and Biotechnology, for flower plants, by irradiation techniques, it is possible to select flower colors or select traits that are resistant to adverse conditions. environmental benefits such as preventing fungal and bacterial diseases on plants. “Compared to natural mutations, the probability is one in a thousand or one million, but using radioactive sources to cause mutations in plants will have a higher probability of hundreds, thousands of times,” – Mr. Thuc analyzed. Application on many plant varieties After irradiation, samples of the fake crane orchids were taken to the separation room to be cultured in nutrient solution for a certain time. Not only orchids, the Center for Radiation Technology and Biotechnology has tested irradiation to cause mutations on Forget-me-not Da Lat flowers, Torenia flowers, and Dendrobium orchids. The results have created many mutant lines in flower color and structure of stems and leaves with great differences compared to the mother plant. Through that, the Center has built up the basic processes of radiation breeding; selection of materials for irradiation, frequency of irradiation, propagation, experimental planting to screen for mutations at phenotypic level, identification of mutant lines at molecular level… According to Mr. Le Van Thuc, the Center’s orientation will continue to promote the field of plant biotechnology and plant breeding, rapid multiplication of plant varieties and conservation of valuable plant genetic resources; continue to develop radiation technology in the selection and breeding of key plant varieties, endemic varieties of Lam Dong province, focusing on selecting and creating new quality varieties on flower, fruit, ornamental and medicinal plants. The culture room of Radiation Technology and Biotechnology (Nuclear Research Institute) houses many mutant plants, which are mainly orchids. Currently, the Nuclear Research Institute has used irradiation techniques combined with In-vitro methods, applying in vitro flowering techniques to quickly select flower color mutations, shortening the selection time. filtering, reducing the cost of isolating mutant lines that previously had to be planted in the field for selection. At the same time, the Institute cooperates with many units throughout the country such as the Southern Fruit Institute, the Mekong Delta Rice Institute, the Central Highlands Agro-Forestry Research Institute, universities: Tra Vinh University, the University of Da Lat,… to handle mutant irradiation on many different crops. Mr. Do Minh Ngoc, Deputy Director of the Department of Science and Technology of Lam Dong province, said that irradiation is a tool and a technological solution for breeding that many parts of the world have implemented. However, the selection and maintenance of mutant traits is very important and requires time and experience for these plants to become a source of seeds for other production industries.

Mr. Phan Quoc Chinh, Deputy Director of Lam Dong Center for Science and Technology Application, Head of the topic inside the orchid tissue culture laboratory Di Linh Giac. (Photo: Nguyen Dung/VNA) Nuclear Research Institute (headquartered in Da Lat city, Lam Dong province) is a leading unit in the field of agricultural biology in Vietnam’s atomic energy industry. Among them, radiation breeding is a field that has existed for a long time and developed to this day. mutagenic irradiation on flowers, decorative leaves and rare orchids fake cranes. Irradiation selects mutations The Center for Radiation Technology and Biotechnology (Nuclear Research Institute) is a unit that regularly applies radiation techniques to select and create mutant varieties on plants. Especially in the past time, the market Orchid and mutant bonsai is extremely vibrant, many customers have come to the center to irradiate to mutate plants. The irradiation process is quite quick, with the new technology Gama Cobalt irradiator, this process only takes about 1-2 minutes and is fully automatic. Immediately after, orchid seeds will be taken to the separation room to be cultured in nutrient solution for a certain time. After that, these plants were further isolated many times to select mutant morphologies different from the parent plant. Master Le Xuan Cuong, irradiation technician (Center for Radiation Technology and Biotechnology), said that the number of doses will vary depending on the sample provided by the customer such as tissue samples, branches, seedlings… “After irradiation, it will produce random mutations, beneficial or harmful, regardless of their will” – Master Cuong said. Currently, the Center’s Culture Room is storing many pseudo-crane orchid seedlings that have mutated on the stem and on the leaves. Specifically, the color of leaves and stems have turned white or purple. These are mutant forms that can be seen immediately, for flower color, you have to wait for the plant to grow and flower as usual to know. A seedling of the false crane orchid has had a leaf color mutation, and the stem has turned white or purple. (Photo: Nguyen Dung/VNA) According to Mr. Le Van Thuc, Deputy Director of the Center for Radiation Technology and Biotechnology, for flower plants, by irradiation techniques, it is possible to select flower colors or select traits that are resistant to adverse conditions. environmental benefits such as preventing fungal and bacterial diseases on plants. “Compared to natural mutations, the probability is one in a thousand or one million, but using radioactive sources to cause mutations in plants will have a higher probability of hundreds, thousands of times,” – Mr. Thuc analyzed. Application on many plant varieties Not only orchids, the Center for Radiation Technology and Biotechnology has tested irradiation to cause mutations on Forget-me-not Da Lat flowers, Torenia flowers, and Dendrobium orchids. The results have created many mutant lines in flower color and stem and leaf structure with great differences compared to the mother plant. Through that, the Center has built up the basic processes of radiation breeding; selection of materials for irradiation, frequency of irradiation, propagation, experimental planting to screen for mutations at phenotypic level, identification of mutant lines at molecular level… Technicians of the Center for Radiation Technology and Biotechnology (Nuclear Research Institute, based in Da Lat city, Lam Dong) next to a radioactive projector that causes mutations in plants. (Photo: Nguyen Dung/VNA) According to Mr. Le Van Thuc, the Center’s orientation will continue to promote the field of plant biotechnology and plant breeding, rapid multiplication of plant varieties and conservation of valuable plant genetic resources; continue to develop radiation technology in the selection and breeding of key plant varieties, endemic varieties of Lam Dong province, focusing on selecting and creating new quality varieties on flower, fruit, ornamental and medicinal plants. Currently, the Nuclear Research Institute has used irradiation techniques combined with In-vitro methods, applying in vitro flowering techniques to quickly select flower color mutations, shortening the selection time. filtering, reducing the cost of isolating mutant lines that previously had to be planted in the field for selection. At the same time, the Institute cooperates with many units throughout the country such as the Southern Fruit Institute, the Mekong Delta Rice Institute, the Central Highlands Agro-Forestry Research Institute, universities: Tra Vinh University, the University of Da Lat… to handle mutant irradiation on many different crops. Mr. Do Minh Ngoc, Deputy Director of Provincial Department of Science and Technology Lam Dong Irradiation is a tool and a technological solution for breeding that many parts of the world have implemented. However, the selection and maintenance of mutant traits is very important and requires time and experience, for these plants to become a source of seeds for other production industries.

Model of cuttings to propagate bougainvillea in Phu Dong – Gia Lam, Hanoi. Photo: H.Tien. – Select cuttings: As mentioned above, bougainvillea is a very easy plant to propagate asexually by cuttings. Except for the tops of the trees, the tops of the branches are younger than the color of the cake, the rest of the trunks on the tree can be rooted. However, for cuttings to achieve high survival rate, it is necessary to choose cuttings ≥3 years old, 20-25 cm long, 1-2 cm in diameter, with 3-4 spines (sleeping eyes). If combined with rooting stimulant, the percentage of surviving branches after cuttings will reach over 85%. Note: The cuttings must be very flat, smooth, not bruised. Should use a sharp knife to cut around the base of the branch, remove a small part of the skin that is scratched, helping to increase the rate of rooting. The branches after cutting need to be arranged at the base and tops in the same direction, to avoid confusion when cutting. For seedlings with a diameter of ≥3cm, it is necessary to cut bevels on both sides of the base to create a 3-4cm long wedge shape, to increase the permeability of root stimulants and increase the survival rate. The bougainvillea branches after rooting were transplanted and planted in plastic pots. Photo.H.Tien. – Cutting medium and cutting techniques: Collect fine sand along the river, bring it to dry in 2-3 big sunlight for sterilization and clean fungal diseases. Then spread the sand in a 15-20 thick layer in a cool and drained place. Dilute the cuttings according to the manufacturer’s instructions. Dip each bunch of rootstocks into the solution for about 1 minute. Lift it out, wait for the bunch of branches to look like water, then proceed to plug each base of the branch into the sand (prepared in advance). Distance of cuttings 5 ​​x 5 cm/1 branch. Water regularly to keep moist the sand substrate and seedlings. After 20 to 30 days of cuttings, the plant sprouts roots, sprouts, then transplants into pots. – Choose pots and growing medium: Should choose a type of black paper plastic pots for easy transportation of vehicles for long distance consumption. Pot size, 30 x 35cm, with bottom drainage hole. The growing medium according to the weight ratio includes, 70% arable land + 15% white rice husk + 13% chicken manure + 2% lime powder. Mix the medium well and incubate for 3-4 months to close the pot to plant the seedling. Note, gently pluck the seedlings, dig up the soil about 4-5 cm deep in the middle of the pot, then compact it. Then place each pot 60 x 60 cm apart on the agricultural tarpaulin-covered field, helping to drain water quickly, avoid local flooding, and prevent fertilizer from seeping into the ground and polluting the groundwater. Bougainvillea is a sun-loving plant but does not tolerate high humidity. Water only when the potting medium turns dry. – Plant care on pots: Apply NPK 13+13+13+TE periodically every 25-30 days. Dosage, 1 kg of NPK root for 30-15 pots of bougainvillea, depending on the actual growth of the plant. Combine spraying fertilizer Atonik 1.8 through the leaves, stimulating the plants to grow in balance, accelerating sprouting. When the sprouts reach more than 20 cm long, press the tops to create a canopy. Leave branches on the tree 20 cm long and 3 young leaves. The cutting of the tops of branches should be carried out regularly, so that the tree can soon achieve a luxuriant canopy and increase the harvest value. The bougainvillea has five colors thanks to the technique of grafting branches. Photo: H.Tien. Pest control: The bougainvillea tree is basically not infected with pests and diseases. However, under commercial production conditions, leaf anthracnose can occur. It is necessary to keep the garden well ventilated and promptly drain water when it rains. Absolutely do not let the garden floor and potting medium get too wet. On cloudy weather days, air humidity ≥ 80%, anthracnose room can be sprayed with one of the drugs, Score 250ND, Rocksai Super 525SE, Cure Super 300EC, Help 400SC, Nevo 330EC… instructions on the package. – Export from the garden: Paper flower cuttings, planted from the beginning of the year to the end of the year, have been sold to the market. If you prolong the care period for larger trees, they will sell for a higher price. In addition, it is also possible to bend, create canopy for the tree into artistic poses or add different flower colors to the tree, the business value will be more than doubled.

At around 11:30 a.m. on May 11, a lot of freelance workers, loading and unloading at Dong Xuan and Long Bien markets, are still working hard. They covered the towel, took advantage of the cold water and put it on their heads to fight the rising heat. Information from the National Center for Meteorological and Hydrological Forecasting people should limit going outdoors at noon because the heat can cause dehydration, exhaustion, and heat stroke due to heat stroke. people when exposed to high temperatures. Ultraviolet radiation at the index is very dangerous, people should cover up when going out, apply sunscreen, wear sunglasses and a hat is required. 12 noon on May 11, the outdoor temperature is up to 44 degrees C Freelance workers in Hanoi reel from the scorching summer heat Many labors cover their bodies to protect themselves from the sun Hanoi streets are like a fire pan. The hot weather in Hanoi makes the air become hot and uncomfortable, and people find ways to shield them when they go out on the street. Towards noon, the outdoor temperature increases, although the temperature has not reached its peak, but it also makes people shielding when traveling on the road. Streets seem to evaporate due to the heat effect Workers rest under tree canopy to avoid the scorching heat on Tran Duy Hung street

Signs that the body is dehydrated Thirsty Thirst is a common sign of not getting enough water (or fluids in general) to be hydrated. People don’t have to drink water right away, but as soon as possible. Dry mouth Dry mouth is one of the many ways your body signals it to need water. You won’t be able to produce saliva if your body doesn’t have enough fluids. In addition, bad breath often stems from dry mouth. Therefore, before deciding to chew gum, people should drink a glass of water to determine the cause of this phenomenon. Dark urine Urine is considered a measure of human health based on quantity, color and taste. The more water they contain, the clearer they are. Therefore, this particular liquid that is dark or dark in color is a warning sign that you should supplement your body with fluids. Reduced urination Water helps the kidneys remove toxins from the blood in the form of urine. If the organ is not properly hydrated, you will not urinate often. Long-term storage of these substances can lead to serious health problems. Here are some great ways to avoid dehydration, helping the body to always “stay hydrated” during hot weather: Add flavor to the filtered water Drinking water regularly 8-10 glasses in a day is enough for the adult body. In particular, in the summer, drink at least 12-15 glasses to avoid dehydration of the body. Many people do not like drinking water because they have no attractive taste. Drinking water regularly 8-10 glasses in a day is enough for the adult body. Therefore, you can add a few slices of lemon, strawberry, cucumber, mint leaves … to the water bottle to increase the flavor of the filtered water, stimulating you to drink more water. Carry a bottle of water with you wherever you go, it is the easiest way to stay hydrated all day. Natural cooling drink or smoothie Summer drinks such as coconut water and lemon juice can help reduce heat. These drinks are low in carbs and high in salt, preventing dehydration. Or you can also take a summer smoothie to help your body stay hydrated. Eat summer smoothies paired with delicious fruits, for example blend a mango smoothie mixed with yogurt and some honey. This is the ideal cooling drink when summer comes. Eat more fruits and vegetables Green vegetables contain an ideal amount of water to help your body retain water naturally. Fruits such as watermelon, peach oranges, pineapple … are all very healthy fruits, adding these fruits in the daily diet while helping to provide lost water, copper. when they were the fruits that were rich in vitamin C to help keep moisture. Green vegetables contain an ideal amount of water to help your body retain water naturally. Vegetables such as broccoli, cabbage, and spinach are ideal for cooling the body. In addition, green vegetables also provide water to the skin to help brighten the skin. Add salad to serving size Salad helps the body cool down and prevents dehydration, is an extremely effective method of preventing dehydration on hot days. A plate of raw salad (can be refrigerated to cool) will help the body maintain a stable temperature. Mixing vegetables like lettuce, lettuce, cucumber will be a “cool rain” to cool your body this hot summer. Notes to avoid dehydration Avoid drinking water that is too cold Remember, when you drink water, you need to slowly, slowly let the body receive the water you are replenishing. It is necessary to limit drinking water that is too cold in the hot season because cold water will cool down the body and slow down metabolism, on the other hand, drinking a lot of cold water also causes sore throat. It is important to limit drinking water that is too cold in hot season because cold water will cool down the body. Avoid drinking coffee, tea, or alcohol Even if you are addicted to tea or coffee, make an effort to reduce your intake of both during the summer. Caffeinated and carbonated beverages increase body heat, which causes dehydration. Drink iced tea to balance excess heat in the body if absolutely necessary. Coffee and alcohol have a diuretic effect, making you urinate more and increasing the risk of dehydration and dehydration. Better yet, you should avoid consuming these beverages on hot days. Pay attention to the color and amount of urine Pay attention to the color and amount of urine because they can help warn you when you are dehydrated and dehydrated in the summer. Jonah Soolman, an American nutritionist, said: “If you feel like urinating every 1-2 hours, your urine is light yellow, you are replenishing enough water for your body. If you urinate a little, your urine is dark yellow, pay attention to drink more water because you are dehydrated and need to find solutions to avoid dehydration right away.

Artisan Dong Chien also takes a lot of time to learn about orchids, from garden orchids to seed orchids, which are collected by artisans to choose the best care method. According to Dong Chien artist, firstly, orchid growers need to know the techniques of watering the plants. Not always watering and not always the right time. Should water orchids in the morning, the plants are about to bloom, you should just water gently on the branches and not over water will make the roots waterlogged and affect the flowering process. Artisan Dong Chien also said, “best country, second division, three need, four varieties” are all the most essential in growing orchids and other ornamental plants. So orchid growers need to pay attention to how to fertilize the plants. Artisan Dong Chien said: “Do not fertilize in the afternoon, because at that time the plants are difficult to photosynthesize and will not absorb nutrients, so fertilize in the morning and apply with a sufficient dose, avoid love state of the tree is missing “. In addition, each orchid species will have its own techniques to care for, so growers need to choose strong and well-developed varieties. Currently, there are many places that offer orchids, but to collect beautiful plants, you need to come to the place to check and learn about that orchid variety. Growing and caring for orchids requires not only technique, but also patience, diligence and effort. Orchids are not like other flowers, must be very healthy to germinate to multiply and flower beautifully, this factor needs to depend on the caregiver. Artisan Dong Chien shared: “ I pursue and stick with orchids because I am passionate and love to see orchids bloom, pure and proud flowers are the driving force that motivates me to take better care of them to multiply more varieties. and share with many people with the same passion nationwide “. Artisan Dong Chien is a retired military officer, he chooses to grow orchids to ease his spirit and create his own pleasure. He is not afraid to share the knowledge that he has learned during his time when he tended to his orchid garden. Because he wishes to develop and preserve the wild orchids. Hopefully, with the sharing experiences of artisan Dong Chien, it will motivate those who have a passion for orchids to learn and be more confident in their career in planting and caring for wild orchids.

Did you know that the placement of the bed in the bedroom is also very special. The way of placing a bed is also closely related to the owner’s destiny. Therefore, single men and women should also pay attention to the position of their bed to increase their own bliss. First of all, the bed should not be in the position of a lonely star. Because the position of a lonely star is synonymous with loneliness, without a companion. Being in this position for a long time will make you a loner. If you want to increase your blossoming fortune, you can place the bed in the cherry blossom position to help your luck with more flowers. Please place the bed in the correct position of the peach blossom according to your age! – People of the year of the Pig, the Rabbit, the Goat: the peach blossom location is in the direction of Ty (North). – People of the year of the Rat, Rooster, and Ox: the peach blossom position is in the direction of the Horse (South). – People of the year of Tiger, Horse, and Tuat: the peach blossom position is in the direction of the Rabbit (East). – People of the age of Than, Ty, Thin: The peach blossom position is in the direction of Rooster (West). Place the vase properly to promote flowering Of course, in everyday life, you can also use some small decorations to help your fortune. increase air prosperity. You should place the vase in the position of the peach blossom, the door, the living room to increase your peach blossom fortune. But remember that if the flower wilt, you must replace it immediately, otherwise, your peach blossom luck will decrease. Wear the right accessories In addition to the above two methods, one of the methods suitable for single people to enhance your peach blossom is jewelry. In fact, choosing the right jewelry not only has the effect of decorating and beautifying you, it also helps you to be much luckier in the love story! Girlfriends, boyfriends can bring some accessories to help promote peaches that are pink crystals, some small red strings, spray perfume when meeting the opposite sex can improve your peach blossom luck. * The information in the article is for reference only Quynh Trang / According to Sohu

Brake Lee is fortunate to have a beautiful skin, which makes her feel “ok lah” more than removing foundation, regularly using sunscreen, so her skin is brighter and healthier. Khanh Linh has many times showing off healthy rustic skin thanks to 2 steps with makeup remover oil and cleanser, using toner containing AHA, BHA, serum containing vitamin C, Niacinamide to brighten skin and evenly color, more importantly not Be forgetting the moisturizer. She also replenishes enough water, eats fruits, vegetables and sleeps 7 hours a day. Referring to the beauty that owns the rosy, healthy skin, it is impossible not to mention Bao Thy. Seeing skin as a treasure, Bao Thy chooses to use sunscreen from waking up and 5pm will remove make-up. In addition, the vocalist also built himself a clean diet (eat clean), did not eat too salty or too sweet and drink a lot of water. Ninh Duong Lan Ngoc has a skincare way that focuses on cleaning steps to completely remove makeup and dirt. The actress once shared that “treasure” is Shu Uemura’s “beneficial” makeup remover oil, which helps clean skin deeply while still being smooth. Toc Tien confesses that she is lazy to take care of the skin, but no matter how lazy, she still removes makeup thoroughly enough steps, combines makeup remover in water and oil form, and of course has separate makeup remover for eyes and lips. Huyen My considered in makeup remover, skin cleaning. Because otherwise it will cause skin to acne by clogging pores. The runner also shared that, normally, makeup will not be too thick and hard to apply sunscreen, focusing on removing makeup. That is why she has smooth baby-like skin. The bare face of H’Hen Niê also makes many people jealous because the skin is smooth, with very few defects. The skin care secret that H’Hen Niê leaves for women is to always apply sunscreen every day.

The extinct prehistoric mammoth was believed to be prehistoric human prey. A controversial new study found that the first humans were large predators who took down prey with skilled hunting skills. In a new research paper, the scientists argue that humans and close relatives have been adept hunters from a very early age, starting at least 2 million years ago. Miki Ben-Dor and Ran Barkai, researchers at Tel Aviv University in Israel, and Raphael Sirtoli, a PhD student at Minho University in Portugal. “Until now, efforts to recreate the Stone Age human diet have been based mainly on comparison with 20th century hunter-gatherer societies,” says Ben-Dor. Of course, this comparison is lame, because 2 million years ago, hunter-gatherer societies could hunt and consume elephants and other large animals, while hunter-gatherers today. It can’t be like that. The whole ecosystem has changed, and the conditions cannot be compared. ” Scary evidence Fossil evidence from earliest human ancestors is scarce. But based on archaeological evidence, Ben-Dor said, it was clear that Homo sapiens and their close relatives ate anything that was edible. But how much of their diet consists of plants versus animals is the bottom line. Many animals that are considered omnivores actually have the diet in one way or another. Chimpanzees, for example, are technically omnivores, but meat makes up only about 6% of their diet. Dogs and wolves are predominantly carnivorous but sometimes also nibble on grain, leading to a debate over whether they should be classified as omnivores or predators. According to Ben-Dor, ancient humans Homo habilis ate meat at least 2.6 million years ago. Another primitive human species, Homo erectus, appeared to be an avid carnivore 1.8 million years ago; Their teeth and intestines shrank compared to their previous ancestors, adapted to digest meat instead of plants, and it used stone tools capable of grinding meat. Ben-Dor and Barkai argue in their paper, published in the American Journal of Physical Anthropology, that meat is not just a reward for these humans and the early Homo sapiens. Instead, the authors believe, large animals weighing more than 1,000 kg, such as elephants, hippos and rhinos … make up the bulk of the human diet. The elephants 500,000 years ago could weigh 12 tons, compared with 4 to 6 tons today. Eat a lot of meat, human brain evolution? According to the researchers, these animals can eat fatty meat, which is very suitable to feed the energy-hungry human brain. The authors argued in another recent article that hunting large prey could be the driving force behind human brain evolution. However, the idea is controversial, and researchers disagree on how huge amounts of meat would be useful to hunter-gatherers in the days before refrigeration, as well as about ancient humans skilled in taking down prey that other predators like lions, struggled to defeat. “There are some archaeologists who say, they hunted elephants once, but it’s like a once in a lifetime hunt; that’s what grandparents often tell their children,” John said. “There are people who say that elephant meat can last a long time without preserving, but it’s part of their routine,” said Hawks, a paleontologist at the University of Wisconsin-Madison. important to them. ‘” Ben-Dor and his colleagues wrote in their article that eating large, fatty animals would be a benefit to humankind at the earliest, because losing so many calories on a hunting trip – instead of repeatedly trying to stalk smaller prey. Humans exhibit this high-fat adaptation, researchers say. Archeologically speaking, it was difficult to classify humans and their relatives as carnivores before about 50,000 years ago. That’s because the only reliable biochemical way to distinguish an animal as the top predator or lower in the food chain is a method known as stable nitrogen isotope analysis, requires collagen testing for molecules that are taken orally into the body. Despite the limited evidence of humankind’s early evolution, the researchers say, much remains to be done to prove whether the human ancestor was indeed carnivores. This could include more research on the abundance of animals of different sizes during the Pleistocene, exploring genetic changes over time that could alter the digestibility of species. Different human feeds and comparison of prey size trends over time.