Solutions against heat Planning solution In the past, our ancestors had a saying: “Get a gentle wife to make a house facing south”. It is a very natural and simple way of planning to avoid the direction that the sun rises in the east and sets in the west. The south direction is the direction to catch the cool wind, avoiding the radiation of the sun. Of course it is a folk house in the village-rural structure. Modern urban areas depend on many other factors, so it is not possible to completely choose the direction for the project. This is not to say that the direction is dependent. Where possible, the orientation of the building should be optimized. The Vietnamese standard on heat protection for houses clearly states: “For houses, try to arrange so that the west-east side of the house has the smallest surface area to limit solar radiation”. As with clusters of works or complexes of works, it is necessary to design a reasonable total ground, giving priority to good orientation for mainstream works, works with higher heat resistance requirements such as living and working places. Environmental and ecological solutions This solution is associated with the planning solution. This is also a solution that our ancestors have applied very thoroughly in traditional architecture. Trees, water surface are always indispensable elements, accompanying the architecture. Trees create shade, prevent and cover architectural surfaces from solar radiation. The water surface (pond, lake, aquarium …) and green trees regulate the climate, making the environment cooler and cleaner. Under conditions of unsaturated air humidity, the water surface always has the phenomenon of evaporation. Water evaporation is an endothermic process, so it causes the ambient temperature to drop. Trees and water surface are attached to natural land; All have low emissivity, which are effective factors for overall heat resistance, with a large range of influence. Currently, in many urban areas, the ratio of trees, water surface to construction works is at an alarming rate, plus other areas are concretized at a high level (yard, summer, parking lot). …). The surfaces of these materials have high emissivity, causing the air environment to heat up significantly. Architectural solutions This is considered the broadest and most flexible solution. The architectural solution is the combination of the ground and the building block, the design of a reasonable cover structure to limit the surface exposed to the sun – avoid radiation, or reduce the heat conduction in the material, enhance thermal convection. The basic architectural solutions are as follows: Reasonable ground layout, prioritizing main spaces to avoid contact with sun-catching surfaces; push the extra spaces such as stairs, storage, toilet to that side. Create setbacks, negative spaces such as halls, loggias, technical slots, etc. to avoid solar radiation entering the main space surface. Use side shading structures installed outside the enclosure (walls) to reduce radiation and heat conduction. In traditional folk architecture, many places have a bamboo mat on the veranda. This element has been applied a lot in modern architecture with different forms and different materials. Facade complex with “rigid structures” to block the sun; attached to the bearing structure and cover. Usually it is an umbrella, vertical and horizontal sunshades. In the 70-80s, this type of architecture was very developed – especially in the category of administrative and office buildings. Those designs are carefully studied in terms of architectural physics according to the climate and solar chart of each locality. Build thick walls, box walls (hollow), use insulation materials (hollow bricks, insulation panels, 3D panels, aerated aggregate concrete…) for the covering structure. The door design is reasonable in terms of location and materials. These solutions are all based on the principle of reducing radiation and conduction of heat from the outside. Use heat-resistant materials for roofs such as woven panels, brick holes, corrugated iron roofs (for flat and concrete roofs), use heat-insulated false ceilings (for sloping, tiled roofs). This solution must pay special attention to the problem of ventilation for the air mass between the two roof layers. Reduce the emissivity of the building surface with plants, such as growing vines on the wall, garden design – water surface on the roof. This is a pretty good aesthetic solution, but there are certain changes over time. Organize the premises, design the location and structure the door reasonably; design courtyard, skylight to enhance air convection. The goal is for the hot air to escape up and out, making room for the lower heat mass. Technical solution Air conditioners (Air conditioners): Considered modern, and easy to deploy applications. However, air conditioners also reveal certain disadvantages. First of all, this solution consumes significant energy resources, and affects the environment. According to the principle of thermal balance, to reduce the temperature in the room, it increases the outside temperature by the same amount of heat. Besides, air conditioners are difficult to meet for open spaces, too large spaces. Ventilation: In addition to natural convection, forced ventilation is considered an effective solution to combat heat when natural convection is not effective. Properly designed ventilation systems will contribute to heat resistance, and should be taken advantage of – combined with architectural solutions such as skylights. Spraying water, misting: Misting systems have recently been deployed to many applications, in public spaces such as restaurants, and even houses. Spraying water and mist creates the phenomenon of evaporating water and collecting heat, while enhancing air convection. In addition, the pressure of water spray, mist creates cool air movement (will be discussed in the next section). In addition, homeowners can also use specialized heat-resistant paint for the surface of the building, which is also an effective anti-heat solution.

Mr. Wang holds an 11% stake in China’s largest food delivery group. Meituan’s share price has fallen since last month when the State Administration of Market Regulations of China (SAMR) announced it was opening an investigation into Meituan for anticompetitive practices. Meituan stock price received a new shock on May 10 when CEO Wang posted on social media a poem Tang about the phenomenon of book burning in the Qin Dynasty. Many people think this is Mr. Wang’s way of criticizing the Chinese government for its campaign to tighten control of Internet corporations. Meituan’s stock price plummeted because CEO Wang Xing posted the ancient poem online. Photo: Xinhua. Billionaire Wang deleted the post shortly after, explaining that he used the poem to criticize Meituan’s competitors. However, it was all too late. The hashtag #MeituanSharePriceSlump (Meituan stock price plummeted) attracted 32 million followers on the social networking platform Weibo. At the same time, the Shanghai Consumer Council also heavily criticized Meituan for inappropriate business practices. Recently, the Chinese technology industry has been struggling because of the repressive measures of the Beijing government. The Hang Seng Technology Index is down about 30% from February. “The Chinese tech industry is going through a lot of ups and downs. Technology regulations are constantly being applied, leading to regulatory risks, making it difficult to forecast industry growth,” said Jackson Wong, head of asset management at Amber Hill Capital.

You should never lick your lips. Most of us are accustomed to licking our lips regularly because we think it will moisturize our skin, but the fact is it makes the problem worse. When you lick your lips it can get wetter for a while but as soon as it evaporates, it will make your lips drier. Regularly touching your lips will strip your lips of natural moisturizers and dry them out. Keep your lips clean Your lips are often exposed to dust and airborne contaminants every day, not to mention foods and drinks that can form on your lips after a meal. The first important thing to make your lips look better is to keep your lips clean. So clean it every day by rubbing honey on your lips and gently massaging it. This is a great tip for cleansing and keeping lips soft. Eliminate Make-up This is important for helping your lips to breathe. To allow for that, you must ensure that you remove the lipstick on your lips before you go to bed. You can simply use a cotton pad soaked in makeup remover to remove your lipstick. Sleeping with makeup on your face will damage your skin, causing acne and allergies. Use lip balm Using lip balm daily to avoid the sun’s rays is the simplest way to help protect thin, smooth skin on lips. Lip balm helps avoid ultraviolet rays, retains moisture, prevents dry, chapped lips. Should be used 2-3 times a day and daily. Moisturizes lips Sudden changes in temperature, exposure to some pollutants … are factors that can directly damage the lips. For this reason, it is advisable to moisturize every day with mint-containing lipsticks … this is a natural remedy for plumping lips. Avoid smoking Smoking not only loses the aesthetics of teeth, with time lips no longer attractive to chapped, dry lips. Toxins in cigarette smoke cause lips to age prematurely, lose their natural moisture and gradually appear dark spots.

Accordingly, when accessing the domain name phimmoizz.net, users only receive a message in English with the content “Error 522”. Starting from the morning of April 24, when accessing the domain name phimmoizz.net, users only receive a message in English with the content “Error 522.” (Screenshots) Thought the pirated movie websitemoizz.net was officially gone, in the afternoon of the same day, some netizens discovered a pirated movie website with the domain name phimmoiizz.net. However, in the afternoon of April 25, the Vietnamese online community continued to “get up” when the domain name phimmoiizz.net once again “evaporated” from the Internet. On the same afternoon on April 24, some netizens discovered a pirated movie website with the domain name phimmoiizz.net. (Screenshots) However, up to the present time, the domain name phimmoiizz.net has “evaporated” from the Internet. (Screenshots) With phimmoizz.net and phimoiizz.net taking turns “flying color”, many netizens believe that the future of Vietnam’s biggest pirated film website may be coming to an end. However, this pirated movie website has continuously changed its domain name to bypass the authorities, from phimmoi.net to phimmoiz.net and to phimmoizz.net. Therefore, it is still not possible to confirm that phimmoi.net will not continue to “proliferate” domain names to operate again in the near future. On June 18, 2020, the website phimmoi.net was blocked by network operators in Vietnam. However, many people believe that the above jobs only solve the tip of the problem. On June 18, 2020, the website phimmoi.net was blocked by network operators in Vietnam. (Photo: SAOstar) Accordingly, in recent years, creating a pirated movie website is said to be quite easy and does not cost too much. Owners of these pirated movie websites will buy unlimited cloud storage accounts at very cheap prices from cloud storage services such as Facebook, Google, Fshare, Openload … to store and project. movies that are not copyrighted. Along with that, buying domain names or international hosting is currently very easy and the cost is extremely cheap. So, in case a domain name is blocked, the website owner only needs to activate the new domain name and link it to his own movie store. Therefore, blocking the IP of a pirated movie website only solves the tip of the problem because immediately another website “pops up”. In the last few years, creating a pirated movie website has been said to be quite easy and does not cost too much. (Photo: Internet) The obvious proof is that after being blocked for a day, phimmoi.net resumes operation with a new domain name – phimmoiz.net. After that, phimmoiz.net continued to be blocked but also quickly returned to the domain name phimmoizz.net. According to many experts, if you want to solve the problem of pirated movies, you must first solve the tip of the problem – the consciousness of Internet users. If you want to solve the problem of pirated movies, you must first solve the tip of the problem – the awareness of Internet users. (Artwork: ICT.News) Currently, a large part of Vietnamese people still do not have the habit of paying money to watch movies and listen to music on the Internet, so “invisible” is helping to support pirated movie websites to have more “land to live.”

On the evening of April 15, Dich Lihui joined the Youku website propaganda event with his senior Renji Luan. At the event, the 29-year-old actress wore a green two-wire dress, letting her curly hair gently let loose.

Not supporting the title of C-biz’s hottest “hot” Xinjiang beauty, Heat Ba became the focus with a sophisticated face. The tight-fitting dress emphasizes the slender, flexible body pressed against the ant’s waistline.

A series of photos of the event’s stage are poor quality but can not “drown” the standard beauty “goddess” of the star “Patriarch”.

Beautiful face “no dead angle”, but fans expressed concern because Heat Ba has been visibly thinner. Not only is the neck inert, but the usual stretch of the bust also suddenly “evaporates”.

The beauty’s limbs became spindly, her face was also somewhat haggard.

Seen from the angle, Thich Le Heat Ba completely lost the “S” curve. Many netizens leave comments to advise the beauties to pay attention to keep the health and supplement nutrition for the body.

It is known that Dich Lich Ba cooperates with Nham Gia Luan in the movie “Ngu Giao Ky”, adapted from the novel of the same name by author Cuu Lo Phi Huong. The film revolves around the love story of the prince Truong Y (Nham Gia Luan) and the love of the monk Ky Van Hoa (Dich Lich Ba).

Housewives often buy oranges to go home and squeeze them themselves, but sometimes they will have a bad taste of the water.

Bitter orange juice is not due to oranges being damaged or left in the air. This is because the essential oils in the orange peel make the orange juice bitter.

Orange peel essential oil has a negative, cough treatment, pain relief, digestive aid, but it has a bitter, bitter taste that makes it difficult to drink.

Illustration.

In the process of squeezing oranges, we often use force to exert a lot of oil and mix with water, causing a bitter taste.

Besides, in orange juice there are some substances that can react with each other to create a bitter taste. Orange juice is bitter because of the natural reaction of orange juice, producing limonoid compliance, the higher the temperature, the more and more bitter this compound is formed.

To squeeze out orange juice without being bitter, you should minimize the amount of essential oils in the skin getting into the water.

The simplest remedy is to peel the orange peel before squeezing it. Removing the outer crust reduces the ability to secrete essential oils. Then, just gently squeeze the water without worrying about the essential oils getting mixed with the orange juice.

In addition, orange peel essential oil has the property of volatile easily at high temperatures. So after spinning, you should microwave the cup of orange juice for about 30 seconds. This helps the orange peel oil evaporate and stop the bitter taste.

To preserve orange juice, keep them in a dark glass bottle with a lid and place in the refrigerator cooler. Fill the bottle with orange juice to limit the air that oxidizes nutrients. The dark bottle helps to prevent vitamin degradation by light.

First, when you first buy a pan, pour water about 2/3 of the pan. After red, turn on the stove and cook the cake over high heat. Only cook until the water is evaporated and bubbly. After that, turn off the heat and pour the water away.

Use tissue to wipe away any remaining water in the pan.

You continue to put the pan on the stove, to low heat. Then, absorb some tissue with cooking oil and wipe all over the pan. Just do this for about 30 seconds to turn off the heat and let the pan cool.

Repeat wiping the pan with oil blotting paper 2 more times.

This way will make your non-stick pan more durable, comfortable to use without worrying about scratching or peeling.

Illustration.

Some note when using non-stick pan

Pour the oil into the pan before the pan is hot

Pouring oil into the pan is hot will make the non-stick layer easy to peel, toxic to the user as well as reduce the life of the pan.

Use cookware made of wood or heat resistant silicone

Absolutely do not use a metal spoon or spoon to stir food in a non-stick pan. This will make the surface of the pan easy to be scratched, and the poisons can easily be absorbed into the food, causing harm to the user.

Limit seasoning directly when using a pan

Spices such as fish sauce, salt will affect the non-stick layer of the pan. The surface of the pan is prone to pitting, damages the non-stick coating and reduces the life of the pan.

No need to use too much grease

Non-stick pan is used to prevent food from getting close to the pan, so when frying, women do not need to use too much grease, causing waste. In addition, a large amount of grease will increase the temperature when using the non-stick pan. Non-stick layer if heated at high temperature will easily peel off, affecting the life of the pan as well as the health of the user.