There are a few months until the launch date of the iPhone 2021, but the leaks appear more and more and the latest is the 3D CAD drawing of the device revealed by MySmartPrice.
According to the report, Apple iPhone 13 will measure about 146.7 × 71.5 × 7.6mm. That means there will be a slight change in the thickness on the iPhone 13 compared to 7.4mm on the iPhone 12. However, the device is expected to retain the same boxy design as its predecessor.
In addition, the 3D image also shows that the rear camera layout has a slight change in position. Two large circle cutouts with two smaller cutouts are placed diagonally together. In it, two large circles are predicted to be the camera lens while two small circles can be LED flash and microphone.
Also, up front, we see three cuts on the notch. As you can see this time, Apple has brought a smaller notch on the iPhone 2021 as seen in the previous leaks. Because the speaker unit is moved above the cameras. There is no clear information about the cutouts on the front of the device but it will most likely be the IR camera, Dot projector, and selfie camera.
The Apple iPhone 13 series is said to be equipped with the Apple A15 chipset, an improved ultra-wide camera, Qualcomm X60 5G modem, up to 1TB of memory and 6E Wi-Fi support.
As mentioned above, the biggest change will be that the LTPO display panel supports a 120Hz refresh rate on the ‘Pro’ variants.
Previously rumored rumors indicate that the next generation of iPhone is expected to be introduced by Apple in the third week of September.
According to Gizmochina
You must log in to post a comment.